Key Laboratory of Jiangxi Province for Environment and Energy Catalysis, School of Chemistry and Chemical Engineering, Nanchang University, Nanchang 330031, China
Dr. Ze Zhang
Key Laboratory of Jiangxi Province for Environment and Energy Catalysis, School of Chemistry and Chemical Engineering, Nanchang University, Nanchang 330031, China
The exploration of new catalytic hosts is highly important to tackle the sluggish electrochemical kinetics of sulfur redox for achieving high energy density of lithium–sulfur batteries. Herein, for the first time, we present high‐entropy oxide (HEO, (Mg0.2Mn0.2Ni0.2Co0.2Zn0.2)Fe2O4) nanofibers as catalytic host of sulfur. The HEO nanofibers show a synergistic effect among multiple metal cations in spinel structure that enables strong chemical confinement of soluble polysulfides and fast kinetics for polysulfide conversion. Consequently, the S/HEO composite displays the high gravimetric capacity of 1368.7 mAh g−1 at 0.1 C rate, excellent rate capability with the discharge capacity of 632.1 mAh g−1 at 5 C rate, and desirable cycle stability. Furthermore, the S/HEO composite shows desirable sulfur utilization and good cycle stability under a harsh operating condition of high sulfur loading (4.6 mg cm−2) or low electrolyte/sulfur ratio (5 μL mg−1). More impressively, the high volumetric capacity of 2627.9 mAh cm−3 is achieved simultaneously for the S/HEO composite due to the high tap density of 1.92 g cm−3, nearly 2.5 times of the conventional sulfur/carbon composite. Therefore, based on high‐entropy oxide materials, this work affords a fresh concept of elevating the gravimetric/volumetric capacities of sulfur cathodes for lithium–sulfur batteries.
6 November 2020 in Energy & Environmental Materials
Commercial paper is of great potential as a ready‐made substrate to make battery separator due to superior electrolyte affinity of cellulose. Nevertheless, the direct utilization of commercial paper as a separator is impracticable because of its micro‐sized holes between coarse cellulose fibers, which might induce short circuits. Herein, a novel reinforced composite separator is proposed by modifying commercial paper (CP) with high‐dielectric polymer poly(vinylidene fluoride) (PVDF) via a vacuum filtration method. The paper substrate enables excellent electrolyte wettability and high ionic conductivity of the CP‐PVDF composite separator due to the superior electrolyte affinity of cellulose molecule. Meanwhile, the strong hydrogen bonds between F atoms in PVDF and H atoms in the ‐OH groups of cellulose endow the separator with high thermal stability and mechanical strength. Moreover, the CP‐PVDF exhibits outstanding interfacial compatibility toward Li metal anode and guarantees the prominent cycle durability of symmetric Li/Li cells up to 600 h. As a result, the LiFePO4/Li cells assembled with CP‐PVDF separator show dramatic rate performance with high discharge capacity of 113.7 mAh g−1, and prolonged cycle life at 5 C. This work indicates that the paper‐based composite membranes possess great potential for high‐safety and electrochemical performance batteries.
Efficient redox reactions of lean electrolyte lithium–sulfur (Li–S) batteries highly rely on rational catalyst design. Herein, we report an electrocatalyst based on N‐doped carbon nanotubes (CNT)‐encapsulated Ni nanoparticles (Ni@NCNT) as kinetics regulators for Li–S batteries to propel the polysulfide‐involving multiphase transformation. Moreover, such a CNT‐encapsulation strategy greatly prevents the aggregation of Ni nanoparticles and enables the extraordinary structural stability of the hybrid electrocatalyst, which guarantees its persistent catalytic activity on sulfur redox reactions. When used as a modified layer on a commercial separator, the Ni@NCNT interlayer contributes to stabilizing S cathode and Li anode by significantly retarding the shuttle effect. The corresponding batteries with a 3.5 mg cm−2 sulfur loading achieve the promising cycle stability with ∼85% capacity retention at the electrolyte/sulfur ratios of 5 and 3 μL mg−1. Even at a high loading of 12.2 mg cm−2, the battery affords an areal capacity of 7.5 mA h cm−2.
5 April 2022 in ACS Applied Materials & Interfaces