Fatigue fracture simulation based on phase field methods is a promising numerical approach. As a typical continuum approach, phase field methods can naturally simulate complex fatigue fracture behavior. Moreover, the cracking is a natural result of the simulation without additional fracture criterion. This study first introduced the phase field fracture principle, then reviewed some recent advances in phase field methods for fatigue fracture modeling, and gave representative examples in macroscale, microscale, and multiscale structural simulations. In addition, some strategies to improve the performance of phase field models were summarized from different perspectives. The applications of phase field methods to fatigue failure demonstrate the ability to handle complex fracture behaviors under multiple loading forms and their interactions, and the methods have great potential for development. Finally, an outlook was made in four aspects: loading form, fatigue degradation criterion, coupled crystal plasticity, and performance improvement.
The purpose of this paper is to investigate the performance of laser shock peening (LSP) subjected to fretting fatigue with TC11 titanium alloy specimens and pads. Three laser power densities (3.2 GW/cm2, 4.8 GW/cm2 and 6.4 GW/cm2) of LSP were chosen and tested using manufactured fretting fatigue apparatus. The experimental results show that the LSP surface treatment significantly improves the fretting fatigue lives of the fretting specimens, and the fretting fatigue life increases most when the laser power density is 4.8 GW/cm2. It is also found that with the increase of the laser power density, the fatigue crack initiation location tends to move from the surface to the interior of the specimen.
In turbine tenon joint structures, fretting fatigue is common and can have detrimental effects on the components. To increase the fretting fatigue life, the design of tenon joint structures must be optimized. A parametric model of the three-tooth mortise and tenon joint structure is developed in this research. Sensitivity analysis yields the primary characteristic parameters, which are then employed as design variables. The objective function is the life of fretting fatigue. An aero-engine turbine three-tooth mortise and tenon joint structure was optimized against fretting fatigue using a Multi-Island Genetic Algorithm (MIGA), which was then experimentally verified. The optimization was based on the multidisciplinary optimization platform ISIGHT to write batch files integrating ANSYS and MATLAB. According to the findings, the three-tooth mortise and tenon joint structure’s fretting fatigue life can be increased by 51.3% by applying the MIGA. The contact pressure was reduced by 0.54% and the maximum slip amplitude has been reduced by 13%. The approach of optimization’s efficacy was confirmed.