This paper constructs a spatiotemporal feature fusion network (STNet) to enhance the influence of spatiotemporal features of signals on the diagnostic performance during motor fault diagnosis. The STNet consists of the spatial feature processing capability of convolutional neural networks (CNN) and the temporal feature processing capability of recurrent neural networks (RNN). It is used for fault diagnosis of motor vibration signals. The network uses dual-stream branching to extract the fault features of motor vibration signals by a convolutional neural network and gated recurrent unit (GRU) simultaneously. The features are also enhanced by using the attention mechanism. Then, the temporal and spatial features are fused and input into the softmax function for fault discrimination. After that, the fault diagnosis of motor vibration signals is completed. In addition, several sets of experimental evaluations are conducted. The experimental results show that the vibration signal processing method combined with spatiotemporal features can effectively improve the recognition accuracy of motor faults.
This paper investigates the event-triggered fault diagnosis (FD) problem for interval type-2 (IT2) Takagi–Sugeno (T-S) fuzzy networked systems. Firstly, an FD fuzzy filter is proposed by using IT2 T-S fuzzy theory to generate a residual signal. This means that the FD filter premise variable needs to not be identical to the nonlinear networked systems (NNSs). The evaluation functions are referenced to determine the occurrence of system faults. Secondly, under the event-triggered mechanism, a fault residual system (FRS) is established with parameter uncertainty, external disturbance and time delay, which can reduce signal transmission and communication pressure. Thirdly, the progressive stability of the fault residual system is guaranteed by using the Lyapunov theory. For the energy bounded condition of external noise interference, the performance criterion is established using linear matrix inequalities. The matrix parameters of the target FD filter are obtained by the convex optimization method. A less conservative fault diagnosis method can be obtained. Finally, the simulation example is provided to illustrate the effectiveness and the practicalities of the proposed theoretical method.