The fate of glyphosate and its metabolite AminoMethylPhosponic acid (AMPA) was followed at the catchment of the Sûre river, mainly characterized by small population density and small and medium-sized wastewater treatment plants (WWTPs). A high concentration of AMPA was found in water samples collected in inlet from different wastewater streams, the industry being the main contributor, while glyphosate resulted mainly in domestic origin. The two molecules were also monitored in the anaerobic digestion as in the supernatant produced after centrifugation (reject water). A total of 0.0713 and 2.24 g/d of glyphosate and AMPA respectively were regularly returned to the activated sludge tank (AST) indicating a 20% impact of the sludge management line on the global wastewater mass balance. Finally, the use of Constructed Wetlands (CWs) in Vertical Flow (VF) configuration was tested as a suitable technology to retain both glyphosate and AMPA (90 and up to 50% elimination respectively) and minimize their discharge into surface water.

Background: Micropollutants in bodies of water represent many challenges. We addressed these challenges by the application of constructed wetlands, which represent advanced treatment technology for the removal of micropollutants from water. However, which mechanisms specifically contribute to the removal efficiency often remains unclear. Methods: Here, we focus on the removal of 27 micropollutants by bioremediation. For this, macrophytes Phragmites australis, Iris pseudacorus and Lythrum salicaria were taken from established wetlands, and a special experimental set-up was designed. In order to better understand the impact of the rhizosphere microbiome, we determined the microbial composition using 16S rRNA gene sequencing and investigated the role of identified genera in the micropollutant removal of micropollutants. Moreover, we studied the colonization of macrophyte roots by arbuscular mycorrhizal fungi, which are known for their symbiotic relationship with plants. This symbiosis could result in increased removal of present micropollutants. Results: We found Iris pseudacorus to be the most successful bioremediative system, as it removed 22 compounds, including persistent ones, with more than 80% efficiency. The most abundant genera that contributed to the removal of micropollutants were Pseudomonas, Flavobacterium, Variovorax, Methylotenera, Reyranella, Amaricoccus and Hydrogenophaga. Iris pseudacorus exhibited the highest colonization rate (56%). Conclusions: Our experiments demonstrate the positive impact of rhizosphere microorganisms on the removal of micropollutants.

The present research aims at giving an approach to the issue of surface water contamination due to micropollutants in rural areas. The catchment of the Sûre river was selected as a reference case for the Greater Region, characterized mainly by settlements with low population density, small water bodies and small- to medium-sized wastewater treatment plants (WWTPs). For these WWTPs, conventional technical solutions for micropollutant elimination are not suitable; therefore, an adapted mitigation strategy is needed to prevent the impact of micropollutants, especially during the dry season. As a suitable alternative to more intensive technologies, Constructed Wetlands (CW) in Vertical Flow (VF) configuration have been successfully tested over a 1-year period and the elimination rate of 27 micropollutants was quantified. Emission reduction by VF was then considered in a static mass balance model that calculates the longitudinal concentration profile for the entire river catchment. The EmiSûre approach, which focuses on river quality (concentrations of pollutants) instead of emitted loads, effectively allowed simulation of adopted measures a priori and resulted in efficient support for decision-makers with WWTP upgrade scenarios.

The focus of this study is the characterization of unconventional sand-based substrates used in our previous project EmiSûre, (Interreg Greater Region (German federal states Rhineland-Palatinate and Saarland, the Grand Duchy of Luxembourg, regions Wallonia and Lorraine from Belgium and France, respectively), 2017-2021). The project aimed to develop and test alternative, nature-based technologies for the elimination of micropollutants (MPs) from municipal wastewater. For the characterization, two approaches were chosen. In the first approach, adsorption kinetics with a single compound allowed a perception of the adsorption capacity of the studied substrates compared to conventional substrates (granular activated carbons). This knowledge was completed by the second approach: an implementation of the studied substrates in packed-bed columns, which treated a mixture of 27 MPs in tap water for 10 months. Additionally, all three substrates (bentonite sand, sand with 15% activated biochar and sand with 15% zeolite) were characterized for physical and chemical properties, and the microbial potential of the activated and non-activated biochar was examined. From the studies, it is clear that the sand with an admixture of activated biochar is the most efficient sorbent in terms of single compound adsorption in batch (dye) and adsorption of 27 MPs on packed-bed columns. In contrast to the two other substrates, it shows long-term stable removal efficiencies. In the packed-bed columns, 18 out of 27 compounds were removed on average with high efficiency (80-99%), which is impressive, if we consider the variety of the compounds examined (pharmaceuticals, herbicides, pesticides, etc.) and their removal in conventional treatments. Additionally, adsorption models were created for the experimental data of all compounds adsorbed on the substrate with an admixture of activated biochar resulting in the best fit with the combined Langmuir-Freundlich model. These satisfying results suggest the application of the sand-based substrate with an admixture of activated biochar for further research and possibly upscale installations with the aim to offer and prove a reasonable and efficient alternative for MPs elimination from municipal wastewater.

This study aimed to evaluate the suitability of biochar produced by pyrolysis from recovered wastewater cellulose and activated biologically as an admixture in Constructed Wetlands (CWs) when applied as a post-treatment step to remove micropollutants (MPs) from municipal wastewater effluent. Two planted vertical flow mesocosm CWs with cellulose-based admixtures of different origins (plant residue and recovered toilet paper) were fed with a municipal wastewater effluent representative for rural catchments. The results showed an average MPs elimination of 89.1 % for the activated biochar produced from recovered cellulose when 15 relevant compounds are considered and a reduction of the risk from compounds cocktail below the maximum acceptable level having diclofenac, carbamazepine, PFOS, ciprofloxacin and clarithromycin as main risk drivers (Risk Quotient > 1). The implementation of a circular approach to reduce MPs was finally conducted for the Blies catchment (Saarland region in Germany) characterized by low population density and small, sensitive water bodies. This approach demonstrates the feasibility of combining cellulose recovery with a fine sieve in large wastewater treatment plants (WWTPs) and providing biochar produced from recovered cellulose as an admixture to small WWTP where CW is an affordable solution for MP mitigation.