A holographic device is under development that aims to improve light collection in solar cells. The aim is to explore the potential of using photopolymer holographic optical elements (HOEs) to collect light from a moving source, such as the sun, and redirect it for concentration by a holographic lens. A working range of 45° is targeted for such a device to be useful in solar applications without tracking. A photopolymer HOE is capable of efficiently redirecting light, but the angular selectivity of a single grating is usually of the order of one degree at the thicknesses required for high efficiency. The challenge here is to increase the angular and wavelength range of the gratings so that a reasonable number may be multiplexed and/or combined to create a device that can concentrate light incident from a large range of angles. In this paper, low spatial frequency holographic recording is explored to increase the angular and wavelength range of an individual grating. Ultimately, a combination of gratings will be used so that a broad range of angles of incidence are accepted. A design is proposed for the combination of such elements into a holographic solar collector. The first step in achieving this is optimization of recording at low spatial frequency. This requires a photopolymer material with unique properties, such as a fast monomer diffusion rate. This paper reports results on the efficiency of holograms recorded in an acrylamide-based photopolymer at low spatial frequencies (100, 200, and $300\mathrm{l}/\mathrm{mm}$). The diffraction efficiency and angular selectivity of recorded holograms have been studied for various photopolymer layer thicknesses and different intensities of the recording beams. A diffraction efficiency of over 80% was achieved at a spatial frequency of $200\mathrm{l}/\mathrm{mm}$. The optimum intensity of recording at this spatial frequency was found to be $1\mathrm{mW}/{\mathrm{cm}}^2$. Individual gratings and focusing elements with high efficiency and FWHM angles of 3° are experimentally demonstrated.

A holographic device characterised by a large angular range of operation is under development. The aim of this study is to increase the angular working range of the diffractive lens by stacking three layers of high efficiency optical elements on top of each other so that light is collected (and focussed) from a broader range of angles. The angular range of each individual lens element is important, and work has already been done in an acrylamide-based photosensitive polymer to broaden the angular range of individual elements using holographic recording at a low spatial frequency. This paper reports new results on the angular selectivity of stacked diffractive lenses. A working range of 12° is achieved. The diffractive focussing elements were recorded holographically with a central spatial frequency of 300 l/mm using exposure energy of 60 mJ/cm²at a range of recording angles. At this spatial frequency with layers of thickness 50 ± 5 µm, a diffraction efficiency of 80% and 50% was achieved in the single lens element and combined device, respectively. The optical recording process and the properties of the multilayer structure are described and discussed. Holographic recording of a single lens element is also successfully demonstrated on a flexible glass substrate (Corning(R) Willow(R) Glass) for the first time.