Methane is the second most prevalent greenhouse gas after carbon dioxide in global climate change, and catalytic oxidation technology is a very effective way to eliminate methane. However, the high reaction temperature of methane catalytic oxidation is an urgent problem that needs to be solved. In this work, a series of MnCo2O4.5 catalysts were prepared using carbon spheres as templates, combined with metal ion adsorption and calcination processes. Excitingly, the catalytic oxidation activity of MnCo2O4.5 spherical catalyst with irregular nanoparticles on the surface for lean methane (T90 = 395 °C) is higher than that of pure phase Co3O4 (T90 = 538 °C) and Mo3O4 (T90 = 581 °C) spherical catalysts and even surpasses most precious metal catalysts. The main reasons are as follows: (1) The spherical core with irregular nanoparticle morphology significantly increases the specific surface area, creating abundant active sites; (2) through the optimized distribution of oxygen vacancies, rapid oxygen migration through this structure can quickly enter the catalytic zone; (3) the hierarchical wall structure expands the interface and provides spatial accommodation for the catalytic process. Meanwhile, the structure of the ball wall further expands the reaction interface, providing sufficient space for the occurrence of reactions. Rich and highly active oxygen vacancies are evenly distributed on the surface and inside of the ball. The extraordinary performance of low-temperature methane combustion catalysts has opened a promising new path, which is expected to inject strong impetus into the global energy transition and environmental protection.
This review takes defect chemistry as the starting point and the improvement of material properties as the foothold, and puts forward insights on the application, limitation and prospect of defect engineering in the modification of methane combustion catalysts.
Among many electrode materials, cobalt-based nanomaterials are widely used in supercapacitors because of their high natural abundance, good electrical conductivity, and high specific capacitance. However, there are still some difficulties to overcome, including poor structural stability and low power density. This paper summarizes the research progress of cobalt-based nanomaterials (cobalt oxide, cobalt hydroxide, cobalt-containing ternary metal oxides, etc.) as electrode materials for supercapacitors in recent years and discusses the preparation methods and properties of the materials. Notably, the focus of this paper is on the strategies to improve the electrochemical properties of these materials. We show that the performance of cobalt-based nanomaterials can be improved by designing their morphologies and, among the many morphologies, the mesoporous structure plays a major role. This is because mesoporous structures can mitigate volume changes and improve the performance of pseudo capacitance. This review is dedicated to the study of several cobalt-based nanomaterials in supercapacitors, and we hope that future scholars will make new breakthroughs in morphology design.
To increase the utilization ratio and catalytic efficiency of the nano TiO2, The RGO/TiO2/(Ag) powders and RGO/TiO2/Ag aerogel photocatalyst were designed and prepared. The composition and microstructure of RGO/TiO2/(Ag) powders and RGO/TiO2/Ag aerogel were studied, in addition, the photocatalytic activity of RGO/TiO2/(Ag) powders and RGO/TiO2/Ag aerogel was researched by the photocatalytic degradation behavior of formaldehyde solution and formaldehyde gas respectively. The result indicate that TiO2 is uniformly loaded on the surface of RGO with a particle size of 10 nm to 20 nm. When the amount of graphene oxide added is 1 wt%, RGO/TiO2 powder has the highest degradation effect on formaldehyde solution, in addition, the introduction of Ag can greatly improve the photocatalytic effect of the sample. The results also show that the pore size of RGO/TiO2/Ag aerogel is between 7.6 nm and 12.1 nm, and the degradation rate of formaldehyde gas is 77.08% within 2 hours.