Hassan Elmkhah

Dr. Hassan Elmkhah


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2019 in Materials Research Express
Verified
Journal Article
Closed access
KJKatayoon Jokar
Katayoon Jokar
HEHassan Elmkhah
Hassan Elmkhah
AFArash Fattah-alhosseini
Arash Fattah-alhosseini
KBKazem Babaei
Kazem Babaei
AZAshkan Zolriasatein
Ashkan Zolriasatein

2 April 2020 in Journal of Asian Ceramic Societies
Verified
Journal Article
Open access
ZFZahra Andalibi Fazel
Zahra Andalibi Fazel
HEHassan Elmkhah
Hassan Elmkhah
AFArash Fattah-Alhosseini
Arash Fattah-Alhosseini
KBKazem Babaei
Kazem Babaei
MMMostafa Meghdari
Mostafa Meghdari
The main goal of this study is to compare the electrochemical behavior of CrN/TiN multilayer coating and TiN single-layer coating applied by cathodic arc evaporation (CAE) -physical vapor deposition (PVD) on the substrate of Ti-6Al-4 V in Hank’s solution. So, a TiN single-layer coating was formed using PVD method as well as CrN/TiN multilayer coating under totally the same conditions including deposition temperature, working pressure, bias voltage, cathode current and deposition time. To identify the phases in the coatings, X-ray diffraction (XRD) was utilized in order and field emission scanning electron microscopy (FE-SEM) was used in order to study the microstructure of coating. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) tests were also carried out for corrosion measurements. In the corrosion evaluation, the PDP and EIS tests were performed for the samples after immersion in Hank’s solution for 24 hours to reach the steady state. The obtained results from PDP curves showed that the specimen with CrN/TiN multilayer coating exhibited better corrosion behavior than the TiN single-layer coatings. This improvement in corrosion resistance is probably due to the high density of the layers in the CrN/TiN multilayer coating that prevents the penetration of the corrosive solution to the substrate.

23 December 2020 in Journal of Asian Ceramic Societies
Verified
Journal Article
Open access
ELErfan Lotfi-Khojasteh
Erfan Lotfi-Khojasteh
MSMohammad Sahebazamani
Mohammad Sahebazamani
HEHassan Elmkhah
Hassan Elmkhah
MNMeisam Nouri
Meisam Nouri
OIOmid Imantalab
Omid Imantalab
AFArash Fattah-alhosseini
Arash Fattah-alhosseini
The purpose of this study is to investigate the tribological and corrosion behavior of TiN/CrN nanostructured multilayer coating on H13 carburized hot-work tool steel. Pack cementation and cathodic arc physical vapor deposition (Arc-PVD) techniques were employed to apply adiffused layer and ahard coating, respectively. FE-SEM and XRD were used for coating characterization. Apin-on-disc wear test and Rockwell Cindenter were employed to study wear behavior and adhesion of the coating. To evaluate the corrosion behavior of the specimens, the specimens were tested by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) after immersion in 3.5% sodium chloride solution for 48 hours. The results of potentiodynamic polarization and EIS curves showed that the TiN/CrN nano-layer coating with apre-carburized treatment demonstrated abetter corrosion behavior than H13 and carburized samples. According to the electrochemical test, the current density of the substrate, carburized, and pre-carburized TiN/CrN coated samples were 1.070, 0.875, 0.487 µA/cm2, respectively. This improvement in corrosion resistance is due to the high density of the TiN/CrN nano-layers coating that prevents the diffusion of the corrosion solution into the substrate.

2 January 2020 in Journal of Asian Ceramic Societies
Verified
Journal Article
Open access
HEHassan Elmkhah
Hassan Elmkhah
AFArash Fattah-alhosseini
Arash Fattah-alhosseini
KBK. Babaei
K. Babaei
AAA. Abdollah-Zadeh
A. Abdollah-Zadeh
FMF. Mahboubi
F. Mahboubi
The present study aims to determine the effect of Al on the corrosion resistance of nanostructured TiAlN coatings deposited using a pulsed direct current plasma-assisted chemical vapor deposition (pulsed-DC PACVD) technique. The nanostructured TiAlN coatings were synthesized with three different Al-content values of by distinct precursor’s ratio of AlCl3-to-TiCl4. The number of AlCl3-to-TiCl4 precursor ratios was changed from 1 to 3 in order to vary the Al content. FE-SEM, XRD, EPMA and a Knoop micro-hardness tester were used to characterize the coated surfaces of the specimens. Electrochemical corrosion tests were carried out at 25 ± 1°C to investigate the corrosion behavior of the substrate and the TiN and TiAlN nanostructured coatings in 3.5 wt % NaCl solution. The results indicated that the potentiodynamic polarization plots revealed the passive behavior of TiAlN(2) nanostructured coatings that were more improved than the TiN, TiAlN(1) and TiAlN(3) coatings. Moreover, these curves showed that the TiAlN(2) nanostructured coating had an exceptional polarization resistance that was considered much higher than those of the substrate, TiN, TiAlN(1) and TiAlN(3) coatings. Also, the impedance spectroscopy plots showed that the TiAlN (2) coating had an exceptionally high polarization resistance compared to the substrate and other coatings.

1 December 2019 in Materials Research Express
Verified
Journal Article
Open access
NMNidhal Sahib Mansoor
Nidhal Sahib Mansoor
AFArash Fattah-alhosseini
Arash Fattah-alhosseini
HEHassan Elmkhah
Hassan Elmkhah
ASArash Shishehian
Arash Shishehian

29 January 2024 in Advanced Engineering Materials
Verified
Journal Article
Closed access
ELErfan Lotfi‐Khojasteh
Erfan Lotfi‐Khojasteh
HEHassan Elmkhah
Hassan Elmkhah
MNMeisam Nouri
Meisam Nouri
PMPaul Heinz Mayrhofer
Paul Heinz Mayrhofer