A slant plate flat throw test system for measuring the restitution coefficient of granular materials and a sliding friction test instrument for measuring the friction coefficient between discrete particles and continuum boundary surface materials are developed. The restitution coefficients of the glass bead particles, the glass beads relative to the glass plate, the composite of glass plate and the rubber membrane and the friction coefficients between the glass beads and the rubber film and the filter paper are measured by the designed methods. Based on the measured restitution coefficient and friction coefficient, the discrete element numerical simulation is carried out for triaxial test and plane strain test. Through comparing the experimental results and the discrete element numerical simulation results, the feasibility and rationality of the designed measurement methods and the discrete element numerical simulation are verified. The measuring methods developed in this paper can be further applied to the tests of other fine particles.
27 July 2024 in Journal of Rock Mechanics and Geotechnical Engineering
The discrete element method (DEM) is adopted to simulate the triaxial tests of granular materials in this study. In the DEM simulations, two different membrane-forming methods are used to generate triaxial samples. One method is to pack the internal particles first, then to generate the enclosed membrane; the other is to generate the internal particles and the enclosed membrane together. A definition of the effective strain, which combines microscopic numerical results with macroscopic expression in three-dimensional space, is presented to describe the macroscopic deformation process of granular materials. With these two membrane generation methods, the effective strain distributions in longitudinal section and transverse section of the triaxial sample are described to investigate the progressive failure and the evolution of the shear bands in granular materials. Two typical shear band failure modes in triaxial tests are observed in the DEM simulations with different membrane-forming methods. One is a single shear band like a scraper bowl, and the other is an axial symmetric shear band like two hoppers stacking as the shape of rotational “X” in triaxial sample. The characteristics of the shear bands during the failure processes are discussed in detail based on the DEM simulations.
1 May 2024 in International Journal of Geomechanics