Junjie Wang

Mr. Junjie Wang

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
JWJunjie Wang
Junjie Wang
YLYuan LI
Yuan LI
YZYi Zhang
Yi Zhang
With the continuous increase in the number of vehicles, the proportion of carbon emissions from road traffic in cities has significantly increased, putting pressure on the overall carbon emission reduction of cities The implementation of low-carbon transportation has, therefore, become crucial to urban emission reductions. Based on the situation of vehicles in Chengdu, this study uses the LEAP model to construct a road traffic development scenario in Chengdu from 2020 to 2025. The research focuses on common greenhouse gases that contribute to carbon emissions such as CO2, N2O, and CH4 from motor vehicles. With current policies being considered, we simulate and evaluate energy consumption and carbon emissions under two energy-saving and emission reduction scenarios: low carbon (LC) and strengthen low carbon (SLC). The results show that carbon emissions significantly improve under the LC scenario, and that the carbon emissions of the road traffic of Chengdu will peak before 2030 under the SLC scenario.

JCJunhui Chen
Junhui Chen
YLYuan LI
Yuan LI
ZMZhongwei Meng
Zhongwei Meng
XFXiaoqiong Feng
Xiaoqiong Feng
JWJunjie Wang
Junjie Wang
Shuxiao WangShuxiao Wang
Shuxiao Wang
With the acceleration of urban construction, the pollutant emission of non-road mobile machinery such as construction machinery is becoming more and more prominent. In this paper, a portable emissions measurement system (PEMS) tested the emissions of eight different types of construction machinery under actual operating conditions and was used for idling, walking, and working under the different emission reduction techniques. The results showed that the pollutant emission of construction machinery is affected by the pollutant contribution of working conditions. According to different emission reduction techniques, the diesel oxidation catalyst (DOC) can reduce carbon monoxide (CO) by 41.6–94.8% and hydrocarbon (HC) by 92.7–95.1%, catalytic diesel particulate filter (CDPF) can reduce particulate matter (PM) by 87.1–99.5%, and selective catalytic reduction (SCR) using urea as a reducing agent can reduce nitrogen oxides (NOx) by 60.3% to 80.5%. Copper-based SCR is better than vanadium-based SCR in NOx reduction. In addition, the study found that when the enhanced 3DOC + CDPF emission reduction technique is used on forklifts, DOC has a “low-temperature saturation effect”, which will reduce the emission reduction effect of CO and THC. The use of Burner + DOC + CDPF emission reduction techniques and fuel injection heating process will increase CO’s emission factors by 3.2–3.5 and 4.4–6.7 times compared with the actual operating conditions.

2 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
JCJuihui Chen
Juihui Chen
XFXiaoqiong Feng
Xiaoqiong Feng
YZYonghui Zhu
Yonghui Zhu
Ling HuangLing Huang
Ling Huang
MHMin He
Min He
LLli li
li li
To continuously improve air quality, after implementation of the “Clean Air Action Plan, 2013–2017” (CAAP), the “Three-year Action Plan to Fight Air Pollution” (TYP) was further conducted from 2018 to 2020. However, the effectiveness of the TYP remains unclear in one of the major city-clusters of China, the Sichuan Basin. In this study, the bottom-up method was used to quantify the emission reduction during TYP based on the emissions inventory in Sichuan Basin in 2017 and the air pollution control measures adopted from 2018 to 2020 in each city. The reduction of PM2.5 concentration and the avoided premature deaths due to implementation of air pollution control measures were assessed by using an integrated meteorology and air quality modeling system and a concentration-response algorithm. Emissions of SO2, NOx, PM2.5, and VOCs in the Sichuan Basin have been reduced by 42.6, 105.2, 40.2, and 136.6 Gg, respectively. The control of non-electricity industry contributed significantly to the emission reduction of all pollutants, accounting for 26–49%. In addition, the control of mobile sources contributes the most to NOx reductions, accounting for 57%. The results illustrate that the focus of air pollution control in Sichuan Basin is still industrial sources. We also found that the emission reduction of NOx, PM2.5, and VOCs in Chengdu is significantly higher than that of other cities, which were about 3.4~15.4 times, 2.2~40.1 times, and 4.3~24.4 times that of other cities, respectively. In Sichuan Basin, the average reduction rate of PM2.5 concentration due to air pollution control measures was 5% on average, with the highest contributions from industry, mobile source, and dust emission control. The decrease rate in each city ranges between 1~10%, and the decreasing ratios in Dazhou (10%), Chengdu (8%), and Zigong (7%) are relatively higher. The number of premature deaths avoided due to air pollution control measures in Sichuan Basin is estimated to be 22,934. Chengdu and Dazhou have benefitted most from the air pollution control measures, with 6043 and 2713 premature deaths avoided, respectively. Our results indicate that the implementation of TYP has achieved remarkable environmental and health benefits.

22 June 2024 in Environmental Science and Pollution Research
Verified
Journal Article
Closed access
PDF file
YZYi Zhang
Yi Zhang
LLLijuan Lei
Lijuan Lei
JMJuntao Ma
Juntao Ma
QWQiang Wu
Qiang Wu
ZSZhuozhi Shu
Zhuozhi Shu
TJTao Jiang
Tao Jiang

JWJunjie Wang
Junjie Wang
YZYi Zhang
Yi Zhang
LMLinde Mei
Linde Mei
XXXuemei Xu
Xuemei Xu
HYHanmei Yin
Hanmei Yin
JCJunhui Chen
Junhui Chen
In the context of global warming and climate change, various international communities have set different reduction targets for carbon emissions. In 2020, China proposed that CO2 emissions will peak by 2030 and reached a critical period in which carbon reduction is a key strategic direction. Sichuan Academy of Environmental Sciences published the “Panzhihua Three-Year Iron Fist Gas Control Action Plan” in 2021. The measures implemented in the plan only address general considerations of conventional pollutants in the atmosphere. This study established the Panzhihua LEAP model based on the GREAT tool and built four simulation scenarios, including pollutant treatment upgrade (PTU), traffic improvement (TI), boiler remediation (BR), and baseline scenarios for industrial sources, mobile sources, and industrial boilers in policy implementation. It provided a supportive basis for the development of environmental protection measures in Sichuan province to increase the efficiency of carbon emission reduction. The quantitative analysis of the simulation results for the five years from 2020 to 2024 was conducted to discuss the intrinsic links between carbon emissions and energy consumption, market storage, and demand under different scenarios. It concluded that the BR and TI scenarios benefit carbon reduction, while the PTU scenario negatively impacts it. This study provided recommendations for analyzing the carbon footprint at a city-wide level, quantifying the relationship between the implementation of relevant environmental measures and carbon emissions, which are available for policy development that incorporates carbon reduction considerations and offers relevant support for future research.

20 December 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
JWJunjie Wang
Junjie Wang
JMJuntao Ma
Juntao Ma
SWSihui Wang
Sihui Wang
ZSZhuozhi Shu
Zhuozhi Shu
XFXiaoqiong Feng
Xiaoqiong Feng
TJTao Jiang
Tao Jiang
Coordinating and controlling carbon and atmospheric pollutant emissions in industrial cities poses challenges, making it difficult to formulate effective environmental governance strategies in China. This study used the Community Multiscale Air Quality (CMAQ) and Long-range Energy Alternatives Planning (LEAP) models, with a typical industrial city in the Sichuan Basin as the case study. Five emission reduction scenarios, one integration scenario, and one baseline scenario were set to quantitatively analyze the synergistic effect between carbon emissions and atmospheric pollutant emissions. The results indicate a high synergy between sulfur dioxide and greenhouse gases. For every one-point decrease in the Air Quality Composite Index (AQCI), the Industrial Restructuring Scenario (IR), Other Source Management Scenario (OSM), Transportation Energy Efficiency Improvement Scenario (TEEI), Industrial Energy Efficiency Improvement Scenario (IEEI), and Transportation Restructuring (TR) scenarios would require a reduction in carbon emissions by 56,492.79 kilotons, 39,850.45 kilotons, 34,027.5 kilotons, 22,356.58 kilotons, and 3243.33 kilotons, respectively. The results indicate that governance measures, such as improving transportation structure and upgrading industrial technologies, provide stronger support for simultaneous carbon emissions reductions and air quality improvement.