Dynamic compression tests of granite after thermal shock were performed using the split Hopkinson pressure bar system, to determine the effects of strain rate and temperature on the dynamic mechanical parameters, energy dissipation features and failure modes of granite. The results indicate that the dynamic compressive strength increased exponentially with strain rate and decreased with increasing temperature. Temperature and incident energy can equivalently transform for the same dynamic compressive strength. Dynamic elastic modulus of granite decreased obviously with increasing temperature but did not have a clear correlation with strain rate. As the impact gas pressure increased, the stress-strain curves changed from Class II to Class I behavior, and the failure modes of specimens transformed from slightly split to completely pulverized. The critical temperature at which the stress-strain curves changed from Class II to Class I was determined to be 300 °C, when the impact gas pressure is 0.6 MPa. As the applied temperature increased, density, wave velocity and wave impedance all decreased, meanwhile, the degree of granite specimen crushing was aggravated. Under the same incident energy, as the temperature increased, the reflected energy increased notably and the absorbed energy increased slightly, but the transmitted energy decreased. For the same temperature, the reflected and absorbed energies increased linearly as the incident energy increased, whereas the transmitted energy increased logarithmically. The SEM images of the thermal crack distribution on the granite specimen surface at different temperatures can well explain the essence of mechanical parameters deterioration of granite after thermal shock. This work can provide guidance for impact crushing design of high temperature rocks during excavations.
To investigate the dynamic mechanics and post-failure characteristics of fault-cemented rock strata, broken rock particles were reshaped to obtain cemented rock samples with various particle size distributions (PSDs). Split Hopkinson pressure bar (SHPB) dynamic impact tests were performed on the cemented rock samples under different strain rates. The test results show that plastic deformation occurs in the cemented rock sample as a result of its porous structure. Therefore, there is no linear phase in the dynamic stress–strain curves. With an increase in the Talbot index and mixture type, more large particles were contained inside the cemented rock sample, and the dynamic strength gradually increased. A power function can effectively describe the relationship between the strain rate and dynamic strength for various Talbot indices. After dynamic impact, the fragments of the cemented rock samples exhibit evident fractal laws, and the breakage of the samples includes breakage of the original rock particle itself and breakage between the rock particles and cementations. The breakage ratio and fractal dimension both decrease with the increase in the number of mixture type and Talbot index but increase with the increase in strain rate. It is worth noting that the breakage ratio and fractal dimension have a linear relationship regardless of the PSD or strain. The relationship between the dynamic strength and fractal dimension has different response laws for the PSD and strain rate effects. The dynamic strength is negatively linearly related to the fractal dimension under the PSD effect but positively linearly related to the fractal dimension under the strain rate effect. This research work can provide foundation support for investigating the instability mechanism of fault cemented rock strata under dynamic stress.
The study of the evolution law of basic physical parameters and dynamic compression performance of deep granite under the environment of the heating-cooling cycle is of great significance for the stability evaluation of deep underground engineering and the development of deep resources. In this study, heating-cooling cycle tests and dynamic compression tests were conducted on a large number of fine-grained granite specimens with heating temperatures from 200 to 600 °C and times from one to twenty times using a box-type high-temperature muffle furnace and Hopkinson pressure bar (SHPB) test system, and the evolution law of basic physical parameters and dynamic compression mechanical properties of fine-grained granite were studied using theoretical and fitting analysis. The test results showed that: the changes of the basic physical parameters of granite have obvious temperature effect; 600 °C is a threshold value for the changes of each physical parameter of granite; the sensitivity of each physical parameter to the number of heating and cooling cycles is small before 600 °C; and the sensitivity of each physical parameter to the number of heating and cooling cycles significantly increases at 600 °C. The dynamic compressive strength and elastic modulus of granite decreased with the increase in heating and cooling cycles, and the maximum decrease rate was 89.1% and 85.9%, respectively, and the strain rate linearly increased with the increase in heating and cooling cycles, and the maximum strain rate was 123 s−1. The temperature, the number of heating and cooling cycles, and the impact air pressure, all had significant effects on the damage mode and crushing degree of granite.