Due to the inevitable deviations between the results of theoretical calculations and physical experiments, flutter tests and flutter signal analysis often play significant roles in designing the aeroelasticity of a new aircraft. The measured structural response from aeroelastic models in both wind tunnel tests and real fight flutter tests contain an abundance of structural information, but traditional methods tend to have limited ability to extract features of concern. Inspired by deep learning concepts, a novel feature extraction method for flutter signal analysis was established in this study by combining the convolutional neural network (CNN) with empirical mode decomposition (EMD). It is widely hypothesized that when flutter occurs, the measured structural signals are harmonic or divergent in the time domain, and that the flutter modal (1) is singular and (2) its energy increases significantly in the frequency domain. A measured-signal feature extraction and flutter criterion framework was constructed accordingly. The measured signals from a wind tunnel test were manually labeled “flutter” and “no-flutter” as the foundational dataset for the deep learning algorithm. After the normalized preprocessing, the intrinsic mode functions (IMFs) of the flutter test signals are obtained by the EMD method. The IMFs are then reshaped to make them the suitable size to be input to the CNN. The CNN parameters are optimized though the training dataset, and the trained model is validated through the test dataset (i.e., cross-validation). The accuracy rate of the proposed method reached 100% on the test dataset. The training model appears to effectively distinguish whether or not the structural response signal contains flutter. The combination of EMD and CNN provides effective feature extraction of time series signals in flutter test data. This research explores the connection between structural response signals and flutter from the perspective of artificial intelligence. The method allows for real-time, online prediction with low computational complexity.
12 August 2018 in Mathematical Problems in Engineering
Flutter tests are conducted primarily for the purpose of modal parameter estimation and flutter boundary prediction, the accuracy of which is severely affected by the acquired data quality, structural modal density, and nonstationary conditions. An improved Hilbert-Huang Transform (HHT) algorithm is presented in this paper which mitigates the typical mode mixing effect via modulation. The algorithm is validated by theory, by numerical simulation, and per actual flight flutter test data. The results show that the proposed method could extract the flutter model parameters and predict the flutter speed more accurately, which is feasible for the current flutter test data processing.
7 June 2019 in International Journal of Pattern Recognition and Artificial Intelligence
Hypersonic aircraft have been rapidly developed in recent years both theoretically and experimentally. Aerothermoelastic simulation is very challenging due to its inherent complexity, but physical tests are a workable approach. Flutter tests with variable speed are a popular alternative to hypersonic tests which provide nonstationary structural response data. This paper proposes a nonstationarity assessment method based on energy distribution in the time-frequency domain. The proposed method reveals the nonstationarity level corresponding to the appropriate modal identification algorithm or flutter boundary prediction (FBP) method. Several classic flutter criteria are utilized to build a hypersonic aircraft FBP framework. Numerical simulation and experimental applications demonstrate the effectiveness and feasibility of the proposed method, which facilitates accurate flutter predictions for the subcritical turbulence response during hypersonic flutter flight.
The analysis on the test data is an important way to obtain the flutter characteristics of aircraft. Because of the low quality of the measured signal, the preprocessing is indispensable to improve the accuracy of flutter data analysis. In this paper, the morphological filtering is introduced into the field of flutter structure data processing. The theory of mathematical morphology is given, and the effectiveness of morphological filtering depending on the different operation types and structural elements are discussed. After that, the typical flutter boundary prediction (FBP) method is used to verify the validity and feasibility of the morphological preprocessing method through the numerical simulations, as well as the flight flutter test data. The results is shown that the morphological filtering can enhance Signal to Noise Rate (SNR) of the measured structural response from the physical test in terms of improving the prediction accuracy in actually engineering applications.
11 June 2022 in International Journal of Aerospace Engineering
Flutter design is important for the design of new aircraft types, for which flutter tests are an important verification measure. Atmospheric turbulence excitation is a common form of excitation in flutter flight tests. The modal parameter estimation of the turbulence response is a key aspect to ensure accurate data processing of flutter test results. Atmospheric turbulence excitation acts on the structural system, and the turbulence response thus simultaneously contains both the randomness of the excitation signal and the determinism of the structure system. In view of the turbulence response characteristics, this paper addresses the incoherence of atmospheric turbulence excitation and the orthogonality of the frequency domain from a multichannel response. The turbulence response is used to perform modal parameter identification in the frequency domain. The power spectral density matrix can be calculated from the multichannel turbulence response using the periodogram method. Singular value decomposition is then performed on the power spectral density matrix at each spectral pin based on the orthogonality of the frequency domain. The maximum singular value of each spectral pin forms a curve over the entire frequency band, which is the autopower spectral density function of the system, the system is directly identified at the frequency domain using the polynomial fitting in the frequency domain, and the modal parameters (frequency, damping ratio) are calculated according to the fitted transfer function. This paper verifies the theoretical feasibility of the proposed method using simulation data. The engineering applicability is verified based on the turbulence response from the flutter flight test of a certain aircraft type.