With the demanding system requirements for the fifth-generation (5G) wireless communications and the severe spectrum shortage at conventional cellular frequencies, multibeam antenna systems operating in the millimeter-wave frequency bands have attracted a lot of research interest and have been actively investigated. They represent the key antenna technology for supporting a high data transmission rate, an improved signal-to-interference-plus-noise ratio, an increased spectral and energy efficiency, and versatile beam shaping, thereby holding a great promise in serving as the critical infrastructure for enabling beamforming and massive multiple-input multiple-output (MIMO) that boost the 5G. This paper provides an overview of the existing multibeam antenna technologies which include the passive multibeam antennas (MBAs) based on quasi-optical components and beamforming circuits, multibeam phased-array antennas enabled by various phase-shifting methods, and digital MBAs with different system architectures. Specifically, their principles of operation, design, and implementation, as well as a number of illustrative application examples are reviewed. Finally, the suitability of these MBAs for the future 5G massive MIMO wireless systems as well as the associated challenges is discussed.
22 November 2016 in IEEE Transactions on Antennas and Propagation
A metamaterial (MTM)-based thin planar lens antenna is proposed for spatial beamforming and multibeam massive multiple-input multiple-output systems. The antenna consists of a planar lens and a linear array of receive/transmit elements. To lower the insertion and reflection loss, the lens is formed by the two-layered ultrathin MTM-based surface separated with air and fed by substrate integrated waveguide-fed stacked-patch antennas. The effects of the focal-to-diameter ( f/D) on the power distribution of the lens are investigated to work out a design method. A planar lens antenna fed with seven elements is, for example, designed to operate at 28-GHz bands. The measured results show that the proposed antenna can achieve a scanning coverage of ±27° with a gain tolerance of 3.7 dB and a maximum gain of 24.2 dBi with an aperture efficiency of 24.5% over the operating bandwidth of 26.6-29 GHz. The lens antenna also features the advantages of compact size, low cost, lightweight, simple feeding network, and easy integration with other circuits for the next generation mobile communication and radar systems.
15 January 2014 in IEEE Antennas and Wireless Propagation Letters
In this letter, a new type of wideband substrate integrated waveguide (SIW) cavity-backed patch antenna and array for millimeter wave (mmW) are investigated and implemented. The proposed antenna is composed of a rectangular patch with a backed SIW cavity. In order to enhance the bandwidth and radiation efficiency, the cavity is designed to resonate at its TE 210 mode. Based on the proposed antenna, a 4 × 4 array is also designed. Both the proposed antenna and array are fabricated with standard printed circuit board (PCB) process, which possess the advantage of easy integration with planar circuits. The measured bandwidth (|S 11 | ≤ -10 dB) of the antenna element is larger than 15%, and that of the antenna array is about 8.7%. The measured peak gains are 6.5 dBi for the element and 17.8 dBi for the array, and the corresponding simulated radiation efficiencies are 83.9% and 74.9%, respectively. The proposed antenna and array are promising for millimeter-wave applications due to its merits of wide band, high efficiency, low cost, low profile, etc.
22 August 2012 in IEEE Transactions on Microwave Theory and Techniques
This paper proposes a type of quasi-elliptic filter with controllable electric and magnetic mixed coupling based on substrate integrated waveguide cavity resonators using two-layer printed circuit board process. For the second-order mixed coupling filter, an embedded short-ended strip line is combined with a conventional inductive window between two cavities to create the mixed coupling, in which the electric and magnetic coupling can be separately controlled by adjusting the width of the strip line and the inductive window, and a controllable transmission zero can be produced below or above the passband. For local multipoint distribution service application, three directly coupled quasi-elliptic filters and two cross-coupled quasi-elliptic filters are designed, simulated, and fabricated using the mixed electric and magnetic coupling second-order filtering units at the Ka-band. For the N-order filter, a maximum of N-1 finite transmission zeros can be realized. The proposed filters show the advantages of good selectivity with controlled transmission zeros, wide upper stopband, and easy integration with other planar circuits. Good agreements have been observed between the measured results and the simulated ones.
7 August 2014 in IEEE Transactions on Antennas and Propagation
Substrate integrated waveguide (SIW) cavity backed dual-band triangular-ring slot (TRS) antennas are proposed for planar integration. First, a low profile dual band 45 $^{\circ}$ linearly polarized (LP) antenna is designed and analyzed. The dual-mode TRS is proposed and developed by simultaneously exciting the mode of the slot and the mode of the patch inside the slot. To minimize the antenna size, the lowest mode (TE110 mode) of the SIW cavity is adopted to excite the TRS. The $-$ 10 dB impedance bandwidth at the higher band is 5.9%, 58.3% wider than that of the conventional SIW cavity backed slot antenna. The interactions of the SIW cavity, the slot mode and the patch mode are analyzed with circuit models and verified by full wave simulations, which provides a new insight into the SIW cavity backed antennas. Then, by exciting a pair of the 45 $^{\circ}$ LP antennas with an SIW coupler, a circularly polarized (CP) dual band antenna with a small frequency ratio of 1.26 is developed. The two antennas are fabricated and tested, and the measured and simulated results agree well.
6 January 2014 in IEEE Antennas and Wireless Propagation Letters
The design of lightweight, compact-size, and high-directivity conical horn lens antenna that covers both 71-76 and 81-86 GHz bands is presented in this letter. The conventional conical moderate-gain horn antenna is integrated with a planar inhomogeneous dielectric flat transmit-array lens having diameter of 35 mm and thickness of 6.35 mm by covering its aperture. The transmit-array lens is designed based on the perforating dielectric technique that is based on the drilling of numerous holes of variable diameters through a dielectric host material. The unit cell size is about λ0/2, which allows for easier fabrication. The proposed lens consists of eight concentric zones of same width of 2.32 mm and sharing the same host dielectric material. A directivity of 26.4 dBi, 9 dBi improvement, sidelobe level (SLL) of -15.7 dB at 74 GHz and directivity of 27 dBi, 9.9 dBi improvement, and SLL of -18.4 dB at 86 GHz were achieved. The proposed horn antenna is 44.46% shorter than the conventional horn antenna producing the same directivity, where the horn antenna length reduction is a result of using the proposed transmit-array lens.