Paper-based analytical devices have been substantially developed in recent decades. Many fabrication techniques for paper-based analytical devices have been demonstrated and reported. Herein, we report a relatively rapid, simple, and inexpensive method for fabricating paper-based analytical devices using parafilm hot pressing. We studied and optimized the effect of the key fabrication parameters, namely pressure, temperature, and pressing time. We discerned the optimal conditions, including a pressure of 3.8 MPa, temperature of 80 °C, and 3 min of pressing time, with the smallest hydrophobic barrier size (821 µm) being governed by laminate mask and parafilm dispersal from pressure and heat. Physical and biochemical properties were evaluated to substantiate the paper functionality for analytical devices. The wicking speed in the fabricated paper strips was slightly lower than that of non-processed paper, resulting from a reduced paper pore size after hot pressing. A colorimetric immunological assay was performed to demonstrate the protein binding capacity of the paper-based device after exposure to pressure and heat from the fabrication. Moreover, mixing in a two-dimensional paper-based device and flowing in a three-dimensional counterpart were thoroughly investigated, demonstrating that the paper devices from this fabrication process are potentially applicable as analytical devices for biomolecule detection. Fast, easy, and inexpensive parafilm hot press fabrication presents an opportunity for researchers to develop paper-based analytical devices in resource-limited environments.

Fungal pathogens such as Candida albicans have significant impacts on women’s health and the economy worldwide. Current detection methods often require access to laboratory facilities that are costly, inconvenient, and slow to access. This often leads to self-diagnosis, self-treatment and eventual antifungal resistance. We have created a rapid (within five minutes), cost-effective, and user-friendly method for the early detection of Candida albicans. Our platform utilises aptamer-tagged-gold-core-shell nanoparticles for Candida albicans detection based on the presence of 1,3-β-d glucan molecules. Nanoparticle aggregation occurs in the presence of Candida albicans fungal cells, causing a redshift in the UV-visible absorbance, turning from pink/purple to blue. This colour change is perceptible by the naked eye and provides a “yes”/“no” result. Our platform was also capable of detecting Candida albicans from individual yeast colonies without prior sample processing, dilution or purification. Candida albicans yeast cells were detected with our platform at concentrations as low as 5 × 10⁵ cells within a 50 μL sample volume. We believe that this technology has the potential to revolutionise women’s health, enabling women to test for Candida albicans accurately and reliably from home. This approach would be advantageous within remote or developing areas.

Long non-coding RNA Homeobox transcript antisense intergenic RNA (HOTAIR) is recognized as a participant in different processes of normal cell development. Aberrant overexpression of HOTAIR contributes to the initiation, growth, and invasiveness of ovarian cancer. Using the affinity interaction of target HOTAIR lncRNA sequences towards a screen-printed gold electrode (SPE-Au), herein we report on a novel, rapid and simple method to detect HOTAIR sequences. HOTAIR lncRNA sequences were first extracted from ovarian cancer cell lines and patient plasma samples and were magnetically captured and purified by complimentary capture probe-functionalized magnetic beads. Isolated target HOTAIR lncRNAs were directly adsorbed onto unmodified screen-printed gold electrodes (SPE-Au) for direct quantification with [Fe(CN)₆]^3−/4− redox couple. Our assay achieved a linear dynamic range of 100 nM and 1 pM for detecting pre-clinical model HOTAIR lncRNA samples (%RSD ≤ 5%, for n = 3) and was highly specific, showing clear distinction between HOTAIR lncRNA targets and non-specific miR-891 and miR-486 (100 nM) (%RSD ≤ 5%, for n = 3). The method was tested using ovarian cancer-specific cell lines (SKOV3 and OVCAR3) and mesothelial cell line (MeT-5A)-derived lncRNAs. The analytical performance of our method was validated using RT-qPCR. Finally, the method was tested using clinical samples from ovarian cancer patients and the resulting electrochemical responses show a clear distinction between the ovarian carcinoma and benign samples.

Candida albicans is an opportunistic fungus that becomes pathogenic and problematic under certain biological conditions. C. albicans may cause painful and uncomfortable symptoms, as well as deaths in immunocompromised patients. Therefore, early detection of C. albicans is essential. However, conventional detection methods are costly, slow, and inaccessible to women in remote or developing areas. To address these concerns, we have developed a wearable and discrete naked-eye detectable colorimetric platform for C. albicans detection. With some modification, this platform is designed to be directly adhered to existing feminine hygiene pads. Our platform is rapid, inexpensive, user-friendly, and disposable and only requires three steps: (i) the addition of vaginal fluid onto sample pads; (ii) the addition of gold nanoparticle gel and running buffer, and (iii) naked eye detection. Our platform is underpinned by selective thiolated aptamer-based recognition of 1,3-β-D glucan molecules—a hallmark of C. albicans cell walls. In the absence of C. albicans, wearable sample pads turn bright pink. In the presence of C. albicans, the wearable pads turn dark blue due to significant nanoparticle target-induced aggregation. We demonstrate naked-eye colorimetric detection of 4.4 × 10⁶ C. albicans cells per ml and nanoparticle stability over a pH range of 3.0–8.0. We believe that this proof-of-concept platform has the potential to have a significant impact on women’s health globally.

Candida albicans is an opportunistic fungus that becomes pathogenic and problematic under certain biological conditions. C.albicans may cause painful and uncomfortable symptoms, as well as deaths in immunocompromised patients. Therefore, early detection of c.albicans is essential. However, conventional detection methods are costly, slow and inaccessible to women in remote or developing areas. To address these concerns, we have developed a wearable and discrete naked-eye detectable, colorimetric platform for c.albicans detection. With some modification, this platform is designed to be directly adhered to existing feminine hygiene pads. Our platform is rapid, inexpensive, user-friendly, disposable and only requires three steps: i) addition of vaginal fluid onto sample pads; ii) addition of gold nanoparticle gel and running buffer, and iii) naked eye detection. Our platform is underpinned by selective thiolated aptamer-based recognition of 1,3-β-D glucan molecules- a hallmark of c.albicans cell walls. In the absence of c.albicans, wearable sample pads turn bright pink. In the presence of c. albicans, the wearable pads turn dark blue due to significant nanoparticle target-induced aggregation. We demonstrate naked eye colorimetric detection of 4.4 ×106 c.albicans cells per ml. We believe that this proof-of-concept platform has the potential to have a significant impact on women’s health, globally.

The green synthesis of metallic nanoparticles is an emerging and promising field owing to its environmentally friendly nature and diverse applications. In this article, a new technology for the green synthesis of functional ultrastable biopolymer gold nanoparticles is introduced. This approach employs thiolated single-stranded DNA (ssDNA-SH) aptamers instead of conventional self-assembled monolayers, resulting in the production of highly stable aptamer-tagged gold-core-shell nanoparticles. A comprehensive discussion on the use of glucose as a simple reducing agent for the green synthesis of Au nanoparticles and the utilization of ssDNA-SH aptamers as smart and biologically functional capping agents is provided. The potential of this innovative approach for the green synthesis of nanoparticles is demonstrated through a case study involving the use of the naked eye for qualitative detection of human fungal infections caused by Candida albicans for women's health.