Xiangcheng Zhang

Xiangcheng Zhang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 May 2021 in Structural Control and Health Monitoring
Verified
Journal Article
Closed access
PDF file
JZJun Zhao
Jun Zhao
YZYi Zhao
Yi Zhao
XRXiaohui Ruan
Xiaohui Ruan
XGXinglong Gong
Xinglong Gong
XZXiangcheng Zhang
Xiangcheng Zhang
Magnetorheological (MR) damper was a kind of smart instrument, and it was very suitable for the semi‐active control. In this research, a large‐scale MR damper working in the shear mode of the MR fluid was developed to enhance the mechanical properties of the shear wall. The influence of MR damper on the mechanical properties of the shear walls, such as stiffness, strength, ductility, and the energy dissipation capacity, had been researched. Firstly, both the model of MR damper and shear wall were established to optimize the properties of the MR damper and shear wall. Then, three different concrete shear walls were fabricated, which were reinforced by carbon fiber‐reinforced polymer (CFRP) bars (W‐1), CFRP bars and MR dampers (W‐2), and steel strands and MR dampers (W‐3), respectively. The mechanical properties of the specimens were experimentally researched and analyzed. The experimental results showed that the ductility, the ability to bear external loads, stiffness, and energy dissipation capacity of the shear walls could be enhanced by the MR damper simultaneously. Compared with W‐1, the ductility, the ability to bear external loads, ultimate deformation, and energy‐dissipation capacity of W‐2 increased by 4.1%, 26.8%, 83.9%, and 35.8%, respectively. The residual deformation of the three shear walls was almost the same. The results indicated that the MR damper could enhance the mechanical properties of the shear walls and had no influence on the self‐centering capacity of the shear walls at the same time.

3 June 2020 in Structural Control and Health Monitoring
Verified
Journal Article
Closed access
PDF file
JZJun Zhao
Jun Zhao
KLKou Li
Kou Li
XZXiangcheng Zhang
Xiangcheng Zhang
YSYu‐Ping Sun
Yu‐Ping Sun
ZXZhao‐Dong Xu
Zhao‐Dong Xu

27 April 2023 in Smart Materials and Structures
Verified
Journal Article
Closed access
JZJun Zhao
Jun Zhao
JLJing Luo
Jing Luo
XZXiangcheng Zhang
Xiangcheng Zhang
XRXiaohui Ruan
Xiaohui Ruan
YSYuping Sun
Yuping Sun
A reinforcing method for developing a kind of shear wall with both excellent self-centering capacity and high energy dissipation was presented, in which carbon fiber reinforced polymer (CFRP) bars or steel strands were longitudinally placed to provide a restoring effect, while magnetorheological (MR) dampers were externally coupled with wall panels to provide extra energy dissipation. To verify the feasibility of this method, three slender concrete walls were tested under reversed cyclic lateral loading while subjected to constant axial compression with an axial load ratio of 0.26, of which one was reinforced with CFRP bars, the second one was reinforced with CFRP bars and two external MR dampers, and the third one was reinforced with steel strands and two external MR dampers. The results indicated that the test walls possessed remarkable load-resisting capacities even when the lateral drift was as large as 1.8% as well as a lateral deformation recovery rate of 74%–89% after unloading. Owing to external MR dampers, the initial stiffness and ductility were increased by 28.3% and 29.8%, respectively. In addition, a specific quantitative analysis showed that the dampers could increase the cumulative energy dissipation of shear walls by 16.6%, of which the contribution provided by MR damper was 64.8%, confirming the effectiveness of MR dampers in improving energy dissipation while preserving the self-centering capacity.

3 December 2022 in Actuators
Verified
Journal Article
Open access
PDF file
XZXiangcheng Zhang
Xiangcheng Zhang
CMChangchi Mou
Changchi Mou
JZJun Zhao
Jun Zhao
YGYingqing Guo
Yingqing Guo
YSYoumin Song
Youmin Song
JYJieyong You
Jieyong You
To analyze the multidimensional elastic–plastic response of the frame structure with magnetorheological (MR) dampers under strong seismic excitations, the test of the MRD was performed, the location matrix of the MRD in the frame structure was derived, and the multidimensional elastic–plastic calculation models of the frame structure with and without an MRD were established based on the three-segment variable stiffness beam. Taking a five-story reinforced concrete (RC) frame structure as an example, the multidimensional elastic–plastic calculation models were developed by MATLAB software and the dynamic time history analyses were performed under strong seismic excitations. The results show that under the seismic wave, after the MRD is installed in the structure, the maximum horizontal displacements of the top-story node of the structure in X and Y directions is reduced by 51.87% and 39.59%, respectively, and the maximum horizontal accelerations are reduced by 36.67% and 47.86%. The maximum displacements and the story drift ratios of each story of the structure are significantly reduced, and the reduction in the maximum accelerations of each story is small relatively. In the frame structure without an MRD, plastic hinges appear at the ends of most columns, and the structure is characterized by a column hinge yield mechanism. The maximum residual displacement angles of the column end in X and Y directions which reach 1.628 × 10−3 rad and 2.101 × 10−3 rad, respectively. After setting the MRD, the number of plastic hinges in X and Y directions at the column end are both reduced by 37.5%, and the residual displacement angle at some column ends are reduced to 0. The results show that the complied calculation model programs of the frame structure can effectively simulate the multi-dimensional seismic response of the structure with and without MRD.

8 September 2024 in Engineering Reports
Verified
Journal Article
Open access
Panxu SunPanxu Sun
Panxu Sun
KLKaixuan Liang
Kaixuan Liang
DWDongwei Wang
Dongwei Wang
XZXiangcheng Zhang
Xiangcheng Zhang
The visualization method for mechanics knowledge in civil engineering courses is very important, which can help students learn abstract mechanics. Combined with the structural analysis software, this paper develops a visualization teaching approach for mechanical analysis in civil engineering structures based on the proposed deformation decomposition method, such as elastic mechanics, material mechanics and structural dynamics. Compared with traditional strain analysis method, the proposed method is more intuitive and can identify more macroscopic basic deformations. By aid of a survey for undergraduate students and master students, the teaching effectiveness of the visualization course is higher than that of the blackboard writing course. Besides, Mann–Whitney test results show that there is a significant difference. The proportion of undergraduate students that think the combination of visualization has good effects are greater than those of master students. The proposed visualization teaching approach can be promoted in mechanics courses of civil engineering.