Estimates for the greenhouse gas emissions caused by maritime transportation account for approx. 870 million tonnes of CO2 tonnes in 2018, increasing the awareness of the public in general and requiring the development of alternative propulsion systems and fuels to reduce them. In this context, the project HySeas III is developing a hydrogen and fuel cell powered roll-on/roll off and passenger ferry intended for the crossing between Kirkwall and Shapinsay in the Orkney Islands in Scotland, a region which currently has an excess of wind and tidal power. In order to explore the environmental aspects of this alternative, a life cycle assessment from cradle to end-of-use using the ReCiPe 2016 method was conducted, contrasting the proposed prototype developed within the project against a conventional diesel ferry and a diesel hybrid ferry. The results show that the use of hydrogen derived from wind energy and fuel cells for ship propulsion allow the reduction of greenhouse gas emissions of up to 89% compared with a conventional diesel ferry. Additional benefits are lower stratospheric ozone depletion, ionizing radiation, ozone formation, particulate matter formation, terrestrial acidification and use of fossil resources. In turn, there is an increase in other impact categories when compared with diesel electric and diesel battery electric propulsion. Additionally, the analysis of endpoint categories shows less impact in terms of damage to human health, to the ecosystems and to resource availability for the hydrogen alternative compared to conventional power trains.
The International Maritime Organization (IMO) established new strategies that could lead to a significant reduction in the carbon footprint of the shipping sector to address global warming. A major factor in achieving this goal is transitioning to renewable fuels. This implies a challenge, as not only ship-innovative solutions but also a complete low-carbon fuel supply chain must be implemented. This work provides a method enabling the exploration of the potential of low-carbon fuel technologies for specific shipping routes up to larger sea regions. Several aspects including vessel sizes, impact of weather and shipping routes, emissions savings and costs are considered. The local energy use is determined with proven bottom-up prediction methods based on ship positioning data from the Automatic Identification System (AIS) in combination with weather and ship technical data. This methodology was extended by an approach to the generation of a basic low-carbon fuel system topology that enables the consideration of local demand profiles. The applicability of the proposed approach is discussed at hand via a case study on Roll-on/Roll-off passenger and cargo (RoPax) ferries transitioning from conventional fuels to a compressed hydrogen fuel system. The results indicate a potential reduction in emissions by up to 95% and possible system sizes and costs.
Hybrid power supply systems integrate the use of different power sources, converters and/or storages for the electrification of maritime applications in order to reduce environmental impacts and contribute to resilience. In the area of port infrastructure, there have been approaches to the hybridisation of RTG cranes, tugs and drayage trucks, which have been equipped with batteries in addition to combustion engines. These approaches can contribute to a reduction in fuel consumption of up to 40% and thus to a reduction in greenhouse gas emissions and air pollutants. With regard to shore-to ship power, there are promising solutions despite the lack of harmonised standards, such as charging with lithium-ion batteries due their high efficiency and power density, as well as battery swapping due to short recharging times and the flexible use of energy from the grid. In the area of hybrid power and propulsion systems, the comparison of diesel engines, fuel cells and batteries shows that diesel engines have lower investment costs, but also lower efficiencies of up to 52% compared to fuel cells with 60%. However, according to the EU HySeasIII project, fuel cells combined with batteries can contribute to a significant reduction in GHG emissions of up to 80%.
8 April 2026 in Advanced Energy and Sustainability Research
The p‐type back junction (BJ) solar cell featuring n + ‐type passivating poly‐Si on oxide (POLO) rear contacts has the potential of being an alternative for the passivated emitter and rear cell (PERC) concept. The cost of ownership (CoO), minimum sustainable price (MSP), and the levelized cost of electricity (LCOE) of POLO BJ cells produced in Germany and in a facility with a production capacity of 5 GWp*a −1 are analyzed here. After assuming that POLO BJ can attain a cell efficiency of 24.2%, an investment of 256.8 million USD and variable and operating annual costs of 317.3 million USD are estimated. The CoO per Wp of cells with efficiency of 24.2% is estimated at 5.79 ¢*Wp −1 , whereas the MSP would be 7.16 ¢*Wp −1 , compared to PERC cells, for which an efficiency of 23.1% is assumed, resulting in a CoO and MSP of 6.31 and 7.75 ¢*Wp −1 . The benefits of the higher efficiency of POLO BJ also propagate downstream to LCOE, as cells of this concept with the mentioned efficiency allow a LCOE under Southern European conditions integrated in monofacial glass–backsheet and bifacial glass–glass modules of 3.32 and 3.02 ¢*kWh −1 , respectively. This is 0.14 ¢*kWh −1 less than that of PERC cells. Other cost‐reduction pathways were explored.