In this study, a new type of composite modified bitumen was developed by blending styrene-butadiene-styrene (SBS) and crumb rubber (CR) with a chemical method to satisfy the durability requirements of waterproofing material in the waterproofing layer of high-speed railway subgrade. A pressure-aging-vessel test for 20, 40 and 80 h were conducted to obtain bitumen samples in different long-term aging conditions. Multiple stress creep recovery (MSCR) tests, linear amplitude scanning tests and bending beam rheometer tests were conducted on three kinds of asphalt binders (SBS modified asphalt, CR modified asphalt and SBS/CR composite modified asphalt) after different long-term aging processes, including high temperature permanent deformation performance, resistance to low temperature thermal and fatigue crack. Meanwhile, aging sensitivities were compared by different rheological indices. Results showed that SBS/CR composite modified asphalt possessed the best properties before and after aging. The elastic property of CR in SBS/CR composite modified asphalt improved the ability to resist low temperature thermal and fatigue cracks at a range of low and middle temperatures. Simultaneously, the copolymer network of SBS and CR significantly improved the elastic response of the asphalt SBS/CR modified asphalt at a range of high temperatures. Furthermore, all test results indicated that the SBS/CR modified asphalt possesses the outstanding ability to anti-aging. SBS/CR is an ideal kind of asphalt to satisfy the demand of 60 years of service life in the subgrade of high speed railway.

The smoothness of high-speed railway is extremely strict. As an important part of the high-speed railway foundation, the subgrade structure has strict deformation requirements. It is necessary to ensure that the subgrade structure does not have plastic cumulative deformation under the long-term cyclic load of the train, which is the most critical geodynamic problem in high-speed railway subgrade. This paper studied the cumulative deformation characteristics of subgrade filling under cyclic train loading through the cyclic triaxial test, three types of accumulative plastic deformation trends, and the value of critical volume shear strain was discussed, which would provide the theoretical support for the dynamic design of high-speed railway.

In the era of high-speed trains, it is very important to ensure the safety and stability of rail tracks under adverse conditions including seasonal freezing and thawing. Freeze–thaw cycles (FTCs) affecting the engineering performance of coarse-grained soil (CGS) is one of the major reasons for track deterioration. The reported results of a number of static freeze–thaw triaxial tests on the shear behaviour of CGS are analysed herein. It was observed that confining pressure (σ₃) and FTCs have a significant influence on the shear behaviour of CGS. In this paper, an empirical mathematical model has been proposed to capture the dilatancy of CGS subjected to FTCs during shearing. The empirical constants a, b, and c proposed in the model are a function of σ₃ and FTCs. The results of the model have been compared with the laboratory experiments and are found to be in good agreement.