This article presents geotechnical reconnaissance data that characterize the formation of 122 new and 49 historical cover‐collapse sinkholes within 1.13 km ² area in 12 months following the M _W 6.4 earthquake that occurred on 29 December 2020, in Petrinja, Croatia. Data include a geological background, seismic sequence information, sinkhole geometric characteristics, rainfall data, and results of detailed geotechnical subsurface investigation. The sinkhole geometrical features were collected using aerial and satellite imagery, terrestrial lidar, and manual measurements. Soil properties and groundwater levels were obtained from four geotechnical boreholes, accompanied by in situ geotechnical characterization and standard penetration tests (SPTs). Soil parameters were obtained from consolidated undrained conventional triaxial compression, oedometer, soil water retention, and index tests performed on 31 soil samples. Clayey cover, 4–10 m thick, with sporadic gravel lenses overlying cavernous, intensely karstified carbonate rocks, characterizes the sinkhole area. Clays are mostly overconsolidated, with varying degrees of saturation ranging from very small to fully saturated. Seasonal and climate‐induced variations in the groundwater table interact with artesian/subartesian karst aquifer, thus affecting the suction and the shear strength. Soil water retention curves (SWRCs) indicate that desaturation is possible for deeper groundwater tables, thus further affecting the effective stress, shear strength, and interparticle tensile forces. Finally, the observed vertical walls that accompanied sinkholes opening can occur in the overconsolidated cohesive cover clay layer with varying degree of saturation. The presented data provide essential geomechanical information necessary to understand the associated sinkhole failure mechanism. This article will help future investigators to perform detailed analyses and provide a background for complementing future sinkhole precursor research. Geotechnical, geological, seismic, and precipitation data generally indicate that the formation of cover‐collapse sinkholes in the study area is a consequence of a specific local geological setting but is significantly expedited by earthquake‐induced dynamic loading and complemented by multiple hydro‐mechanical factors.

Soft rocks in various forms of marly materials have an important role in the geological structure of Dalmatia (Croatia) and Budapest region (Hungary). These materials can cause serious problems in design and construction, due to their complex behavior under atmospheric conditions. For the purpose of better understanding soft rocks behavior and their properties, a database with approximately 600 samples collected throughout Dalmatia was made and collated along with 260 samples from the Budapest area. Based on the collected data, 30 regression analyses were performed among 14 material properties, and eight different types of linear and non-linear correlations with high coefficients of determination were selected, which connect the important mechanical properties (uniaxial compressive strength and Young’s modulus) with physical properties of marls (porosity, dry unit weight, and ultrasonic pulse wave velocity). Most of the determined relations show symmetry between the marls from the Dalmatian region and the Budapest region, and the relation between dry unit weight and uniaxial compressive strength asymmetry can be observed between the marls with different origins. Obtained correlations may be used in cases where little or no information on geotechnical parameters is available, or where results need to be verified due to the problems present in soft rock testing.