In this work, reduced graphene oxide-nickel (RGO–Ni) nanocomposite is synthesized. X-ray diffraction (XRD), scanning electron microscopy (SEM) and SEM–EDS (Energy Dispersive X-Ray Spectroscopy) are used to study the crystalline nature, morphology and elemental composition of the RGO–Ni nanocomposite, respectively. As synthesized RGO–Ni nanocomposite is used to develop selective adsorptive removal of Rhodamine B (RhB) dye from the aqueous solution. The experiments have been performed to investigate RhB uptake via RGO–Ni nanocomposites which include, contact time (60 min), initial dye concentration (50 mg/100 ml), adsorbent dosage (0.5 mg) and pH 8 of dye solution. The equilibrium concentration is determined by using different models namely, Freundlich, Langmuir and Tempkin. Langmuir isotherm has been fitted well. Langmuir and Tempkin equations are determined to have good agreement with the correlation coefficient data. The kinetic study concluded that RhB dye adsorption follows with the pseudo-second-order kinetic model. Further, adsorption mechanism of RGO–Ni is proposed which involves three steps. The synthesized adsorbent is compared with the other adsorbents in the literature and indicates that RGO–Ni nanocomposite used in this study shown better results for a particular adsorption capacity than polymeric, natural and synthetic bioadsorbents. The regeneration and reusability experiments suggest RGO–Ni nanocomposite can be used for many numbers of times for purification/adsorption.
This work describes photocatalytic application of γ-alumina (γ-Al2O3) surface-anchored palladium and palladium oxide nanoparticles (Pd-γ-Al2O3 and PdO-γ-Al2O3 NPs) synthesized by a novel co-precipitation technique. The palladium(0) NPs (Pd-γ-Al2O3) were formed by calcination of the sample in inert medium, whereas PdO NPs (PdO-γ-Al2O3) were obtained by calcination of the sample in atmospheric oxygen. As-synthesized Pd-γ-Al2O3 and PdO-γ-Al2O3 NPs are characterized by X-ray diffraction, Fourier transform-infrared spectroscopy, field emission scanning electron microscopy and photoluminescence (PL) spectra. The PL spectra of Pd-γ-Al2O3 and PdO-γ-Al2O3 NPs display visible-light emissions from 450 to 500 nm at room temperature. This work aims to study the photocatalytic degradation of organic dye pollutants, including bromocresol green (BCG), bromothymol blue, methylene blue and methyl orange using Pd-γ-Al2O3 and PdO-γ-Al2O3 NPs as potential photocatalysts. Experimental parameters, including the admitting concentration of the organic dye solution, Pd-γ-Al2O3 and PdO-γ-Al2O3 photocatalyst dosage, and pH, were varied to ascertain favorable conditions for photocatalytic degradation. The results indicate that the organic dye BCG is completely (100%) degraded in aqueous solution under ultraviolet light, compared with the other organic dyes. Furthermore, Pd-γ-Al2O3 NPs showed better photocatalytic performance than PdO-γ-Al2O3 NPs. The possible photocatalytic degradation mechanism of the organic dyes by Pd-γ-Al2O3 and PdO-γ-Al2O3 photocatalysts is proposed. The studies reveal that Pd and PdO NPs anchored on the γ-Al2O3 surface are promising and effective catalysts for photocatalytic degradation of organic dyes.
10 January 2022 in Adsorption Science & Technology
Degradation of dye pollutants by the photocatalytic process has been regarded as the most efficient green method for removal organic dyes from contaminated water. The current research work describes the synthesis of Fe3O4@SiO2@Ru hybrid magnetic composites (HMCs) and their photocatalytic degradation of two azo dye pollutants, methyl orange (MO) and methyl red (MR), under irradiation of visible light. The synthesis of Fe3O4@SiO2@Ru HMCs involves three stages, including synthesis of Fe3O4 magnetic microspheres (MMSs), followed by silica (SiO2) coating to get Fe3O4@SiO2 MMSs, and then incorporation of presynthesized Ru nanoparticles (~3 nm) onto the surface of Fe3O4@SiO2 HMCs. The synthesized HMCs were characterized by XRD, FTIR, TEM, EDS, XPS, BET analysis, UV-DRS, PL spectroscopy, and VSM to study the physical and chemical properties. Furthermore, the narrow band gap energy of the HMC photocatalyst is a significant parameter that provides high photocatalytic properties due to the high light adsorption. The photocatalytic activity of synthesized Fe3O4@SiO2@Ru HMCs was assessed by researching their ability to degrade the aqueous solution of MO and MR dyes under visible radiation, and the influence of various functional parameters on photocatalytic degradation has also been studied. The results indicate that the photocatalytic degradation of MO and MR dyes is more than 90%, and acid media favors better degradation. The probable mechanism of photodegradation of azo dyes by Fe3O4@SiO2@Ru HMC catalysts has been proposed. Furthermore, due to the strong ferromagnetic Fe3O4 core, HMCs were easily separated from the solution after the photocatalytic degradation process for reuse. Also, the photocatalytic activity after six cycles of use is greater than 90%, suggesting the stability of the synthesized Fe3O4@SiO2@Ru HMCs.