Due to the availability of materials and low cost for production, fused deposition modeling is becoming the most widely used additive manufacturing (AM) technology. However, the reasonable choice of process parameters for FDM is a significant task that directly affects the performance of the printed part. Therefore, it is necessary to investigate the influences of various process parameters on the quality characteristics of the components. The objectives of this study are to thoroughly review the current state of research that characterizes, estimates the effects of process parameters on mechanical properties, and summarizes the conclusions of existing works. In addition, some general issues of the presented research are summarized, and the need for future development is also emphasized. Finally, the research proposes several areas that deserve further study in this field.

In the aerospace industry, spacecraft often serve in harsh operating environments, so the design of ultra-lightweight and high-performance structures is a major requirement in aerospace structure design. In this article, a lightweight aerospace bracket considering fatigue performance was designed by topology optimization and manufactured by 3D-printing. Considering the requirements of assembly with a fixture for fatigue testing and avoiding stress concentration, a reconstructed model was presented by CAD software before manufacturing. To improve the fatigue performance of the structure, this article proposes the design idea of abstracting the practiced working condition of the bracket subjected to cycle loads in the vertical direction via a multiple load-case topology optimization problem by minimizing compliance under a variety of asymmetric extreme loading conditions. Parameter sweeping was used to improve the computational efficiency. The mass of the new bracket was reduced by 37% compared to the original structure. Both numerical simulation and the fatigue test were implemented to support the validity of the new bracket. This work indicates that the integration of the proposed topology optimization design method and additive manufacturing can be a powerful tool for the design of lightweight structures considering fatigue performance.

Homogeneous and rapid mixing in microfluidic devices is difficult to accomplish, owing to the low Reynolds number associated with most flows in microfluidic channels. Here, an efficient electroosmotic micromixer based on a carefully designed lateral structure is demonstrated. The electroosmotic flow in this mixer with an asymmetrical structure induces enhanced disturbance in the micro channel, helping the fluid streams’ folding and stretching, thereby enabling appreciable mixing. Quantitative analysis of the mixing efficiency with respect to the potential applied and the flow rate suggests that the electroosmotic microfluidic mixer developed in the present work can achieve efficient mixing with low applied potential.