The thin-walled tubes used in the front rails of the vehicle’s body in white play a major role in absorbing the energy of the collision. In this work, the energy absorption characteristics of the functionally graded foam-filled thin-walled tubes are studied by using quasi-static finite element analysis. The simulation of all specimens has been conducted by utilizing finite element software ABAQUS/Explicit™. A high-precision constitutive equation is used to obtain mechanical properties of foam in different densities. Uniform density foam-filled and functionally graded foam-filled tubes with various gradient functions and configurations are simulated, and force–displacement and energy–displacement diagrams are extracted and compared to each other. The simulation carried out on the layered samples showed that the 13-layered sample is an appropriate approximation for the continuous variations of density along the axial direction. According to the results, linear variations have had better energy absorption characteristics compared to the samples with gradient exponent of = 2 and = 5 for an ascending density variation. In this study, the innovative density variation patterns as high-low-high and low-high-low are also simulated in which the high-low-high sample has better energy absorption than other specimens. It is shown for 13-layered samples, the specific energy absorption in the high-low-high design is 3 and 6.6% higher than the ascending pattern (m = 1) and the low-high-low samples, respectively.
This study presents a thorough numerical evaluation of the crashworthiness properties of a new bio-inspired DNA tubes (BIDNATs) with circular, elliptical, and rectangular cross-sections. Deformation and crashworthiness behaviors are evaluated using axial quasi-static crushing simulations by ABAQUS/Explicit (Abaqus 6.14, https://www.3ds.com/products-services/simulia/products/abaqus/). The study compares the performance of conventional tubes with rectangular and elliptical cross-sections to DNA-inspired tubes. Increasing the rotation angle leads to more helices and a pronounced helix angle, resulting in lower initial peak force (IPF). However, lower cross-section aspect ratios generally have higher IPF and specific energy absorption (SEA) values. BIDNATs with rectangular cross-sections and a 540° rotation angle have the lowest SEA and IPF values across all aspect ratios. Notably, for the 110/100 aspect ratio, the SEA of E110/100 is 71% higher than the conventional tube. Overall, BIDNATs with elliptical cross-sections and a 360° rotation angle exhibit higher SEA values and lower IPF values, particularly for a width (W) of 100 mm. Conventional circular and elliptical tubes generally have SEA values exceeding 6 J/g, with only E110/100 surpassing this among DNA-inspired tubes. The NE110/100 tube has the highest SEA, surpassing E110/100 by 54%, while its IPF is 10% greater than DNA-inspired E110/100. It's worth noting that conventional circular and elliptical tubes have higher IPF values compared to their DNA-inspired counterparts. These findings offer valuable insights for engineers and researchers in the design of crash tubes to improve overall vehicle safety for both occupants and pedestrians.