Cold-pressed moringa, milk thistle, and jujube seed oils were investigated in terms of their characteristic profiles, thermal properties, and oxidative stability. The findings proved that the extracted oils were characterized by high nutritional values, which encourages their use in various fields. Results showed significant differences between the obtained oils. Overall, jujube seed oil exhibited the best quality parameters, with acidity equal to 0.762 versus 1% for the moringa and milk thistle seed oils. Milk thistle seed oil showed absorbance in the UV-C (100–290 nm), UV-B (290–320 nm), and UV-A (320–400 nm) ranges, while the moringa and jujube seed oils showed absorbance only in the UV-B and UV-A ranges. Concerning bioactive compounds, jujube seed oil presented the highest content of polyphenols, which promoted a good scavenging capacity (90% at 10 µg/mL) compared to the moringa and milk thistle seed oils. Assessing the thermal properties of the obtained oils showed the presence of four groups of triglycerides in the moringa and milk thistle seed oils, and two groups of triglycerides in the jujube seed oil. The thermograms were constant at temperatures above 10 °C for milk thistle seed oil, 15 °C for jujube seed oil, and 30 °C for moringa seed oil, which corresponded to complete liquefaction of the oils. The extinction coefficients K₂₃₂ and K₂₇₀, monitored during storage for 60 days at 60 °C, proved that jujube seed oil had the highest polyphenols content and was the most stable against thermal oxidation.

In the present research study, Cynara cardunculus (wild cardoon) flowers were blended and extracted using different types of buffers (phosphate buffer; citrate buffer and distilled water) for different maceration times. The most reliable, quick and efficient buffer was found to be phosphate (pH = 6.5) with a 6‐h maceration time, which was used throughout this study. C. cardunculus extract (CE) was found to have high clotting and proteolytic activities. The extracted enzyme was found to be very stable against a wide range of pH values as well as of temperature. The formation of milk gels prepared in the presence of CE with different types of milk was evaluated using dynamic rheology and Turbiscan. The evolution of both elastic (G′) and viscous (G″) moduli was monitored with time. The values of the whole milk enriched with milk powder gels were higher. Coagulum stability was evaluated using Turbiscan. The textural properties and the curd‐firming rate of coagulum were also determined. In conclusion, the prepared CE could be an efficient milk‐clotting agent in the production of dairy products.

This paper discusses the total replacement of egg white (EW) with faba bean protein concentrate (FPC) in a marshmallow formulation. The physico-chemical and techno-functional characterizations of the ingredients revealed that FPC, with a protein content of 68%, exhibited an interesting foaming capacity (200%) compared to EW, which had comparable foaming stability. The physico-chemical properties of the final products indicated that the FPC marshmallow (FPCM) had a higher density (0.519 g/mL), lower moisture (17.337%), and a water activity within the recommended range for this type of product. The FPCM had the highest hardness and elasticity values but the lowest cohesiveness and adhesiveness. Scanning electron microscopy showed that the FPCM structure is similar to that of the EW marshmallow (EWM). In front-face fluorescence spectroscopy measurements, the FPCM exhibited higher emission intensity for tryptophan with a maximum at 382 nm and vitamin A with a maximum located around 338 nm. FTIR analysis presented higher peaks at 850, 918, and 1034 cm⁻¹ for the EWM compared to the FPCM. In a hedonic evaluation, the majority of descriptors (hardness, odor, and general acceptability) showed similar scores for both formulations. All results demonstrated the success of the total substitution of egg white by FPC in the marshmallow formulation.