SLM additive manufacturing has demonstrated great potential for aerospace applications when structural elements of individual design and/or complex shape need to be promptly supplied. 3D-printable AlSi10Mg (RS-300) alloy is widely used for the fabrication of different structures in the aerospace industry. The importance of the evaluation of residual stresses that arise as a result of the 3D-printing process’ complex thermal history is widely discussed in literature, but systematic assessment remains lacking for their magnitude, spatial distribution, and comparative analysis of different evaluation techniques. In this study, we report the results of a systematic study of residual stresses in 3D-printed double tower shaped samples using several approaches: the contour method, blind hole drilling laser speckle interferometry, X-ray diffraction, and Xe pFIB-DIC micro-ring-core milling analysis. We show that a high level of tensile and compressive residual stresses is inherited from SLM 3D-printing and retained for longer than 6 months. The stresses vary (from −80 to +180 MPa) over a significant proportion of the material yield stress (from −⅓ to ¾). All residual stress evaluation techniques considered returned comparable values of residual stresses, regardless of dramatically different dimensional scales, which ranged from millimeters for the contour method, laser speckle interferometry, and XRD down to small fractions of a mm (70 μm) for Xe pFIB-DIC ring-core drilling. The use of residual stress evaluation is discussed in the context of optimizing printing strategies to enhance mechanical performance and long-term durability.
12 May 2014 in Fatigue & Fracture of Engineering Materials & Structures
Ga-ion micro-ring-core FIB-DIC evaluation of residual stresses in shot peened VT6 (Ti-6Al-4V) alloy was carried out and cross-validated against other non-destructive and semi-destructive residual stresses evaluation techniques, namely, the conventional X-ray diffraction and mechanical hole drilling. The Korsunsky FIB-DIC method of Ga-ion beam micro-ring-core milling within FIB-SEM with Digital Image Correlation (DIC) deformation analysis delivered spatial resolution down to a few micrometers, while the mechanical drilling of circular holes of ~2 mm diameter with laser speckle interferometry monitoring of strains gave a rough spatial resolution of a few millimeters. Good agreement was also found with the X-ray diffraction estimates of residual stress variation profiles as a function of depth. These results demonstrate that FIB-DIC provides rich information down to the micron scale, it also allows reliable estimation of macro-scale residual stresses.
The determination of residual stresses by combining blind hole drilling and optical interferometric measurement of relief deformation is re-visited to evaluate its applicability to aerospace structures. The experimental methodology involves drilling a deep blind hole and evaluating the hole diameter increments in the principal strain directions using electronic speckle-pattern interferometry (ESPI). This is followed by the determination of the principal residual stress components via the solution of the inverse correlation problem. The study presents the pathway to overcoming one of the primary obstacles in residual stress determination, namely, the optimization of the measurement and interpretation procedures to obtain reliable results. It can be concluded from the analysis of the problem that the formulae connecting the raw experimental data and to the sought residual stress component values lead to a well-posed inverse problem. This makes it possible to obtain estimations of the measurement uncertainty. High density fringe patterns from ESPI provide a rapid and reliable method for residual stress determination, as illustrated using examples of approximately 160 MPa stresses in irregular zones of thick-walled structures.