Qingpeng Han

Dr. Qingpeng Han


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 May 2022 in Journal of Low Frequency Noise, Vibration and Active Control
Verified
Journal Article
Open access
RZRui Zhu
Rui Zhu
MWMingxin Wang
Mingxin Wang
SXSiyu Xu
Siyu Xu
KLKai Li
Kai Li
QHQingpeng Han
Qingpeng Han
KHKeyuan He
Keyuan He
Research on bearing fault diagnosis generally uses a single signal processing method to extract features to a certain extent and then empirically judges the fault type at this stage. However, this approach has a poor fault feature extraction effect when the noise interference signal is large and subjective human errors. The diagnosis effect is determined by external interference and has no practical value. This paper proposes a rolling bearing fault diagnosis method based on singular spectrum analysis and a wide convolution kernel neural network, which can effectively extract the fault features of the rolling bearing crack fault signal with a strong noise interference and realize the efficient diagnosis of this kind of fault. Gaussian white noise is added to the standard bearing fault signal to construct the vibration signal with noise interference. Then, the noisy one-dimensional time series signal is preprocessed, including the data division into the training and test sets and the different kinds of numbering processing. Singular spectrum analysis is performed on the preprocessed data. Then, the denoised training set is used as input in a deep convolution neural network with a wide convolution kernel for feature extraction and model training. The trained diagnosis model is used for the fault prediction of the next test set, and the relevant diagnosis results are output. The test results show that this method can ensure the overall accuracy of more than 90% under the background of high noise, and the diagnosis rate of the model under various working conditions is stably maintained at more than 93%, without the collapse of diagnosis stability under the sudden change of noise. The advantages of model diagnosis efficiency and structural improvement fit are prominent.

24 May 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
RZRui Zhu
Rui Zhu
XTXin Tong
Xin Tong
QHQingpeng Han
Qingpeng Han
KHKeyuan He
Keyuan He
XWXinrou Wang
Xinrou Wang
XWXuechao Wang
Xuechao Wang
Due to various factors such as manufacturing, assembly and operation, the motor air gap will be uneven in the circumferential direction, resulting in the air gap eccentricity having a longer air gap on one side and a shorter air gap on the other side, which affects the normal operation and service life of the motor. This paper analyzed and compared the applicability of linear and nonlinear calculation methods of unbalanced magnetic pull. Based on the method of finite element analysis, the unbalanced magnetic pull of motor rotor under static eccentricity, dynamic eccentricity and compound eccentricity faults were calculated, and the influence of eccentricity on unbalanced magnetic pull was compared, respectively. The results showed that when the motor has static eccentricity, the main components of unbalanced magnetic pull on the rotor are zero frequency and twice the electrical frequency. When the motor has dynamic eccentricity, the unbalanced magnetic tension component of the rotor is mainly frequency conversion. When the motor has two faults at the same time, the unbalanced magnetic pull has zero frequency, rotating frequency and double electric frequency components at the same time. With the increase in the relative eccentricity, the frequency components of the unbalanced magnetic pull under the three faults increase. An air gap eccentricity fault widely exists in motor equipment. When the unbalanced magnetic pull increases to a certain extent, the rotor will be pulled towards the stator, causing the occurrence of rub-impact phenomenon, and seriously threatening the safe operation of the system. In this paper, the numerical analysis method and finite meta-computing method were used for the first time to analyze and compare the unbalanced magnetic pull on the rotor of permanent magnet synchronous motor under three kinds of air gap eccentricity faults. The results showed that the characteristic frequency amplitude of the unbalanced magnetic pull calculated by the two methods is relatively close. Therefore, it is of great significance to carry out calculation and analysis of the unbalanced magnetic pull force under the air gap eccentric fault of the motor.

2 March 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XSXinhang Shen
Xinhang Shen
QHQingpeng Han
Qingpeng Han
YWYu Wang
Yu Wang
BWBin Wu
Bin Wu
RZRui Zhu
Rui Zhu
The online monitoring of debris in oil can timely and accurately reflect the wear status of mechanical equipment. The inductive debris sensor based on the electromagnetic induction can effectively detect various parameters of debris. The four-coil structure-based of the sensor is theoretically introduced. The optimal coil length, the turns of the excitation coil, and the turn ratio are obtained through simulation to improve the sensitivity of the inductive debris sensor. The effects of the excitation frequency and the movement velocity, size, position, and material of the debris on the sensor output are investigated. The sensing signal recovered by coherent demodulation confirms the sensor’s effectiveness in identifying metal debris. The experiment realized the identification of iron debris with a diameter of $93.5 \mu \text{m}$ and copper debris with a diameter of $447.3 \mu \text{m}$ under the 3 mm pipe radius, providing a reference for the design of four-coil inductive debris sensor.

1 January 2019 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
RZRui Zhu
Rui Zhu
GWGuang-Chao Wang
Guang-Chao Wang
QHQingpeng Han
Qingpeng Han
AZAn-Lei Zhao
An-Lei Zhao
JRJian-Xing Ren
Jian-Xing Ren
XXXin Xia
Xin Xia
Rotor rub‐impact has a great influence on the stability and safety of a rotating machine. This study develops a dynamic model of a two‐span rotor‐bearing system with rubbing faults, and numerical simulation is carried out. Moreover, frictional screws are used to simulate a rubbing state by establishing a set of experimental devices that can simulate rotor‐stator friction in the rotor system. Through the experimental platform and its analysis system, the rubbing experiment was conducted, and the vibration of the rotor‐bearing system before and after the critical speed is observed. Rotors running under normal condition, local slight rubbing, and severe rubbing throughout the entire cycle are simulated. Dynamic trajectories, frequency spectrum diagrams, chart of axis track, and Poincare maps are used to analyze the features of the rotor‐bearing system with rub‐impact faults under various parameters. The vibration characteristics of rub impact are obtained. Results show that the dynamic characteristics of the rotor‐bearing system are affected by the change in velocity and degree of impact friction. The findings are helpful in further understanding the dynamic characteristics of the rub‐impact fault of the two‐span rotor‐bearing system and provide reference for fault diagnosis.

26 December 2025 in Engineering Structures
Verified
Journal Article
Closed access
ZWZiyi Wang
Ziyi Wang
HLHui Li
Hui Li
YCYufeng Chang
Yufeng Chang
QHQingpeng Han
Qingpeng Han
ZJZe Jian
Ze Jian
LCLibo Cai
Libo Cai

1 January 2024 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
GYGang Yang
Gang Yang
YWYu Wang
Yu Wang
DQDezhao Qin
Dezhao Qin
RZRui Zhu
Rui Zhu
QHQingpeng Han
Qingpeng Han
In response to the high‐noise, nonlinear, and nonstationary characteristics of vibration signals from aircraft environmental control system (ECS) turbofan rolling bearings, this paper proposes a diagnostic method for the degree of ECS turbofan bearing faults based on the Hidden Markov Model (HMM). Experimental results demonstrate that HMM can accurately diagnose and predict faults in ECS turbofan rolling bearings. The HMM method enhances diagnostic accuracy, and its effectiveness and feasibility in fault diagnosis based on different rolling bearing fault instances are elaborated. By employing the HMM model to establish precise models from decomposed dynamic data, it successfully identifies faults such as the fracture of the bearing cage under biased load conditions, although its performance in recognizing overheating faults is suboptimal.