Today, structural health monitoring (SHM) systems based on guided wave (GW) propagation represent an effective methodology for understating the structural integrity of primary and secondary structures, also made of composite materials. However, the sensitivity to damage detection promoted by these systems can be altered by such factors as the geometry of the monitored parts, as well as the environmental and operational conditions (EOCs). Experimental investigations are fundamental but require a long time period and are costly, especially for tests in real-life scenarios. Experimentally validated simulations can help designers to improve SHM effectiveness due to the possibility of further broadening study on the different geometries, load cases, and material types with less effort. From this point of view, this paper presents two finite element (FE) modeling approaches for the simulation of GW propagation in composite panels. The case study consists of a flat and a curved composite panel. The two approaches herein investigated are based on implicit and explicit finite element analysis (FEA) formulations. The comparison of the predicted measures against the experimental dataset allowed the assessment of the levels of accuracy provided by both modeling approaches with respect to the dispersion curves. Furthermore, to assess the different curvature sensitivities of the proposed numerical and experimental approaches, the extracted dispersion curves for both flat and curved panels were compared.
All structures during operating life can be affected by faults induced by accidental events and operational conditions. Structural health monitoring systems can provide quasi-real-time diagnosis of the structure, thus enabling the condition-based maintenance approach. By means of piezoelectric transducers (PZTs) and ultrasonic guided waves (UGW), the structural integrity can be easily interrogated, even though laborious post-processing techniques are required to correctly interpret sensed data. This work aims to devise a new automatic diagnosis framework based on the propagation of UGW for thin-walled structures fault detection and localisation. Specifically, a fully automated damage identification algorithm was developed through a numerical dataset obtained by finite element simulations, and then validated experimentally. The case of study consisted of a square-shaped aluminium plate equipped with a five PZTs network. Five different damage positions and three different damage sizes were considered. The originality of the proposed algorithm lies in the data processing methodology as well as in its capability to detect damages located inside and outside the sensors network, even close to the panel edges. Algorithm provides, in less than 15 s, indications on the possible damage location and related probability position with a reduced dispersion with respect to other algorithms proposed in literature. A clear image is created displaying the damage position map. The visualisation of the damage position map on the surface of the monitored part allows successful damage imaging and would enable operators to address more efficiently the inspection procedures only in the highlighted areas, reducing maintenance and repair expenses.
Joints are often unavoidable and can be critical points in a complex structure made up of different sub‐elements and materials, e.g., a lightweight aircraft structure. Joining can be performed with different techniques as mechanical fasteners, bonding, or hybrid bonded/bolted (HBB) solutions. HBB solutions are effectively used to join different materials, as metals and composites, leading to composite–metal HBB joint. In this paper, the structural behavior of a carbon fiber reinforced polymer (CFRP)–aluminum single‐lap HBB joint is numerically investigated. Specifically, a detailed finite element model (FEM) is developed to study the joint subjected to an external tensile load. Analyses are conducted by considering two different bolt preloads and three external tensile loads (six tests in total). Results are compared with the aim to highlight the behavior of the joint, and in particular the stress–strain state in each component as a consequence of the applied load pair.
Structural Health Monitoring (SHM) systems based on Guided Ultrasonic Waves are pivotal for the transition from damage tolerance to condition‐based design in aerospace Composite Fiber Reinforced Polymers (CFRP) components. However, environmental and operational variability poses a critical challenge for baseline‐free methods. This work investigates the statistical variability of Lamb waves to validate a population‐based diagnostic approach. The study involved an experimental campaign on 35 CFRP plates subjected to Low‐Velocity Impacts (15 J) and monitored via a piezoelectric sensor network. Parallelly, a Finite Element (FE) model was developed to augment the database. The results highlight that the high intrinsic dispersion within the pristine population overlaps significantly with the damaged population distribution, preventing simple threshold‐based detection. This finding emphasizes the limitations of purely experimental statistical baselines and suggests the implementation of hybrid numerical‐experimental databases to train robust Machine Learning algorithms.
In recent years, the propagation of ultrasonic guided waves (UGW) along the structure to inspect has amply proven to be an excellent strategy for the health monitoring of isotropic and composite structures (SHM—structural health monitoring). For the proper development of the SHM system, the finite element method (FEM) must be mentioned, since the possibility to study the UGW in very complex structures, even characterized by different materials. Successfully locating any possible damage and identifying its severity are key factors in SHM, thus allowing to reduce the design costs. Numerically, the damage can be modeled with several approaches but it is still not clear which is the best solution to accurately reproduce the UGW mechanisms in a faulty structure. The objective of this paper is to study the various effects that different severities of damage can have on UGW propagation. For the scope, various numerical approaches are considered and the results are compared.