At high temperatures, the insulation performance of polypropylene (PP) decreases, making it challenging to meet the application requirements of metallized film capacitors. In this paper, the dielectric performance of PP is improved by long-chain branching modification and adding different kinds of nucleating agents. The added nucleating agents are organic phosphate nucleating agent (NA-21), sorbitol nucleating agent (DMDBS), rare earth nucleating agent (WBG-Ⅱ) and acylamino nucleating agent (TMB-5). The results show that the long-chain branches promote heterogeneous nucleation and inhibit the motion of molecular chains, thereby enhancing the dielectric properties at high temperatures. Nucleating agents modulate the crystalline morphology of long-chain branched polypropylene (LCBPP), which leads to a decrease in the mean free path of carriers and an increase in trap energy level and trap density. Therefore, the conductivity is reduced and the breakdown strength is improved. Among the added nucleating agents, NA-21 showed a significant improvement in the electrical properties of LCBPP films. At 125 °C, compared with PP, the breakdown strength of the modified film is increased by 26.3%, and the energy density is increased by 66.1%. This method provides a reference for improving the dielectric properties of PP.

Increasing of rubber content in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) alloys can extend the applications of this kind of polyolefin. The EPR content and phase structure of isotactic polypropylene multicomponents have great effect on the viscoelasticity and mechanical properties. iPP/EPR in-reactor alloys with a high EPR content were obtained through the in situ crosslinking of EPR chains with α,ω-diene. The morphological observation results indicate that the crosslinked iPP/EPR in-reactor alloys have a good spherical shape with clean and rough external surfaces. The high EPR content is finely dispersed in the crosslinked iPP/EPR alloys in areas ranging in size from tens of nanometers to several micrometers, which implies that a sufficient crosslinking degree of EPR chains can effectively prevent their aggregation and restrict macro-phase separation. The rheological results show a clear plateau in the terminal region, which reveals an entangled polymer chain network in the crosslinked iPP/EPR alloys. The well-dispersed EPR and the bi-continuous phase structure have a great effect on the mechanical properties of the isotactic polypropylene multicomponent which were assessed.