Moataz Badawi

Dr. Moataz Badawi


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2023 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
MBMoataz Badawi
Moataz Badawi
AAAyman G. Ahmed
Ayman G. Ahmed
TETarek Abdel Hamied Hassen Eldamaty
Tarek Abdel Hamied Hassen Eldamaty
MHMedhat M. Helal
Medhat M. Helal
The increasing use of rubber tires and their low recycling ratio have made them a serious environmental problem. This work aims to develop and investigate enhanced lightweight aggregate crumb rubber concrete (PFLWACRC) composites regarding the fracture properties of concrete. Polypropylene (PP) fibers are commonly familiar with increased crack growth endurance of concrete. On the other hand, the reuse of waste rubber in concrete plays a major role in the mitigation of the effects of climate change. Various concrete mixtures were designed with conventional Portland cement and common lightweight coarse aggregates. The variables considered in this study are PP fibers in different percentages (0.2%, 0.4%, and 0.6% volume fraction), and crumb rubber with various substitution proportions (0%, 5%, 10%, 15%, 20%, and 25% of fine aggregates). Cement with 450kg/m3 density with 10% silica fume was used. The fracture characteristics, which involve fracture toughness (KIC) and fracture energy generation (GF), of all concrete mixtures were evaluated by testing two types of samples, i.e. 54 notched concrete beams with dimensions of 10×10×52cm and 54 cylinders with diameter×height equal to 15×30cm. The results showed that the fracture toughness generation addresses the energy scattering limit of concrete mixtures. The findings showed that the existence of PP fibers increased the fracture energy and critical Crack Mouth Opening Displacement (CMOD)c. The PP fibers had a limited effect on the compressive strength and may even reduce it, but a remarkable enhancement of the energy absorption was observed.

9 August 2023 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
MBMoataz Badawi
Moataz Badawi
AAAyman G. Ahmed
Ayman G. Ahmed
TETarek Abdel Hamied Hassen Eldamaty
Tarek Abdel Hamied Hassen Eldamaty
MHMedhat M. Helal
Medhat M. Helal
Globally, billions of tires are being disposed of, representing a natural danger. Until now, a little part of that waste is reused, and most tires are simply accumulated. The present paper studies the durability phenomena of recycled concrete with partial substitution of fine aggregate by waste rubber tires. Silica fume, fly ash, and Cement Kiln Dust (CKD) were utilized as substitutions for the binding material. The overall substitution material reached about 30% of the cement content. The long-term behavior was surveyed by methods for water retention, chloride ions penetrability at 28 and 90 days, and protection from aggressive media (sulfate) at 1, 7, 14, and 28 days. Likewise, the compressive strength of concrete samples at 7, 14, 28, and 90 days was measured. The presence of cementitious framework, CKD, silica fume, and fly ash limit the utilization of waste rubber. Substitution percentages of up to 10% rubber fraction and 30% paste framework accomplish a satisfying strength level (35 MPa). These blends also exhibit higher protection from sulphuric corrosive assault than the reference blend.