This paper presents a modular architecture to develop a wearable system for real-time human motion capture. The system is based on a network of smart inertial measurement units (IMUs) distributed on the human body. Each of these modules is provided with a 32-bit RISC microcontroller (MCU) and miniaturized MEMS sensors: three-axis accelerometer, three-axis gyroscopes, and three-axis magnetometer. The MCU collects measurements from the sensors and implement the sensor fusion algorithm, a quaternion-based extended Kalman filter to estimate the attitude and the gyroscope biases. The design of the proposed IMU, in order to overcome the problems of the commercial solution, aims to improve performance and to reduce size and weight. In this way, it can be easily embedded in a tracksuit for total body motion reconstruction with considerable enhancement of the wearability and comfort. Furthermore, the main achievements will be presented with a performance comparison between the proposed IMU and some commercial platforms.

As witnessed in several behavioural studies, a complex relationship exists between people’s cultural background and their general acceptance towards robots. However, very few studies have investigated whether a robot’s original language and gesture based on certain culture have an impact on the people of the different cultures. The purpose of this work is to provide experimental evidence which supports the idea that humans may accept more easily a robot that can adapt to their specific culture. Indeed, improving acceptance and reducing discomfort is fundamental for future deployment of robots as assistive, health-care or companion devices into a society. We conducted a Human- Robot Interaction experiment both in Egypt and in Japan. Human subjects were engaged in a simulated video conference with robots that were greeting and speaking either in Arabic or in Japanese. The subjects completed a questionnaire assessing their preferences and their emotional state, while their spontaneous reactions were recorded in different ways. The results suggest that Egyptians prefer the Arabic robot, while they feel a sense of discomfort when interacting with the Japanese robot; the opposite is also true for the Japanese. These findings confirm the importance of the localisation of a robot in order to improve human acceptance during social human-robot interaction.

This paper presents a methodology for a reliable comparison among Inertial Measurement Units or attitude estimation devices in a Vicon environment. The misalignment among the reference systems and the lack of synchronization among the devices are the main problems for the correct performance evaluation using Vicon as reference measurement system. We propose a genetic algorithm coupled with Dynamic Time Warping (DTW) to solve these issues. To validate the efficacy of the methodology, a performance comparison is implemented between the WB-3 ultra-miniaturized Inertial Measurement Unit (IMU), developed by our group, with the commercial IMU InertiaCube3™ by InterSense.

Performing laparoscopic surgery requires several skills, which have never been required for conventional open surgery. Surgeons experience difficulties in learning and mastering these techniques. Various training methods and metrics have been developed to assess and improve surgeon's operative abilities. While these training metrics are currently widely being used, skill evaluation methods are still far from being objective in the regular laparoscopic skill education. This study proposes a methodology of defining a processing model that objectively evaluates surgical movement performance in the routine laparoscopic training course. Our approach is based on the analysis of kinematic data describing the movements of surgeon's upper limbs. An ultraminiaturized wearable motion capture system (Waseda Bioinstrumentation system WB-3), therefore, has been developed to measure and analyze these movements. The data processing model was trained by using the subjects' motion features acquired from the WB-3 system and further validated to classify the expertise levels of the subjects with different laparoscopic experience. Experimental results show that the proposed methodology can be efficiently used both for quantitative assessment of surgical movement performance, and for the discrimination between expert surgeons and novices.

A common problem among elderly people is the loss of motor ability. Rehabilitation exercises can help these people recover strength and maintain a good level of mobility. However, high costs and the need for special equipment make professional rehabilitation impractical for regular use in daily life, precluding elderly the possibility to perform focalized training at home. The idea of telerehabilitation is becoming more and more concrete with the rapid development of internet technology. Telerehabilitation would allow the user to perform exercises at home with online professional direction from the doctor. However, at the present state, the doctor cannot obtain real-time and quantitative data from the user, and this limits the training effectiveness. To overcome this problem, an extremely miniaturized, portable motion capture system, named WB-4R, has been developed. Calibration and real-time link orientation reconstruction are very important to improve the accuracy in real-time measurement. In this paper, using the positive results of preliminary experiments on lower limbs, the authors will show the feasibility of the method and confirm the effectiveness of the developed system.

Rapid localization of injured survivors by rescue teams to prevent death is a major issue. In this paper, a sensor system for human rescue including three different types of sensors, a CO₂ sensor, a thermal camera, and a microphone, is proposed. The performance of this system in detecting living victims under the rubble has been tested in a high-fidelity simulated disaster area. Results show that the CO₂ sensor is useful to effectively reduce the possible concerned area, while the thermal camera can confirm the correct position of the victim. Moreover, it is believed that the use of microphones in connection with other sensors would be of great benefit for the detection of casualties. In this work, an algorithm to recognize voices or suspected human noise under rubble has also been developed and tested.