We present a comparative study between a series of well-known semiconductor polymers, used in efficient organic solar cells as hole transport materials (HTM), and the state-of-the art material used as hole transport material in perovskite solar cells: the spiro-OMeTAD. The observed differences in solar cell efficiencies are studied in depth using advanced photoinduced spectroscopic techniques under working illumination conditions. We have observed that there is no correlation between the highest occupied molecular orbital (HOMO) energy levels of the organic semiconductors and the measured open-circuit voltage (VOC). For instance, spiro-OMeTAD and P3HT have a comparable HOMO level of ~5.2 eV vs vacuum even though a difference in VOC of around 200 mV is recorded. This difference is in good agreement with the shift observed for the charge vs voltage measurements. Moreover, hole transfer from the perovskite to the HTM, estimated qualitatively from fluorescence quenching and emission lifetime, seems less efficient for the polymeric HTMs. Finally, the recombination currents from all devices were estimated by using the measured charge (calculated using photoinduced differential charging) and the carriers’ lifetime and their value resulted in accordance with the registered short-circuit currents (JSC) at 1 sun.
22 December 2019 in Journal of the American Chemical Society
The reduction of interfacial charge recombination kinetics in perovskite solar cells is key to increase device photovoltaic efficiencies. Thus, it is necessary to fully understand which are the major carrier losses and, thereafter, how they can be minimized. Transient Photovoltage (TPV) has been widely used to study carrier recombination in solar cells under operando conditions. Interestingly, a novel negative transient deflection appears in perovskite solar cells when carrying out TPV measurements and it has been related to the ionic accumulation at the perovskite interfaces, which is a process that requires great attention to fully understand how perovskite solar cells work. Herein, we moved one step further and continuously monitored the evolution of the negative trace with the aging of the perovskite solar cell. Importantly, we demonstrated that the negative signal changes with aging of the solar cells and such a change can be directly related to the enhancement of the open circuit voltage and fill factor of the devices and thus the solar cell efficiency. We postulate that this increase in efficiency is due to better/faster ion redistribution within the perovskite material.
The use of self-assembled monolayers as selective charge extracting layers in perovskite solar cells is an efficient approach to replace the traditionally used contacts, as they can easily modify the interface to improve the solar cell performance.