Changgao Xia

Prof. Dr. Changgao Xia


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2022 in Energies
Verified
Journal Article
Open access
PDF file
HYHONG TU YANG
HONG TU YANG
YSYan Sun
Yan Sun
CXChanggao Xia
Changgao Xia
HZHongdang Zhang
Hongdang Zhang
To solve the serious pollution problems of traditional fuel tractors and the short continuous operation time of pure electric tractors, a hybrid tractor with fuel cell as the primary power source and battery as the auxiliary power source is proposed. A novel energy management strategy was also designed, which integrates thermostat control strategy, power following strategy, and fuzzy logic control. The energy management strategy utilizes the advantages of different algorithms and realizes the rational distribution of fuel cell and battery output power. The system economy and fuel cell durability are improved by the tabu search algorithm. The simulation results show that the proposed energy management strategy can work well in different SOC states and reduce the fuel cell’s power fluctuations. The tractor is equipped with 960 g of hydrogen, the initial state of charge (SOC) is 90%, and it can operate continuously for 2.65 h.

4 January 2023 in Machines
Verified
Journal Article
Open access
PDF file
XFXin Fan
Xin Fan
JWJunyan Wang
Junyan Wang
HWHaifeng Wang
Haifeng Wang
LYLin Yang
Lin Yang
CXChanggao Xia
Changgao Xia
In the process of trajectory tracking using the linear quadratic regulator (LQR) for driverless wheeled tractors, a weighting matrix optimization method based on an improved quantum genetic algorithm (IQGA) is proposed to solve the problem of weight selection. Firstly, the kinematic model of the wheeled tractor is established according to the Ackermann steering model, and the established model is linearized and discretized. Then, the quantum gate rotation angle adaptive strategy is optimized to adjust the rotation angle required for individual evolution to ensure a timely jumping out of the local optimum. Secondly, the populations were perturbed by the chaotic perturbation strategy and Hadamard gate variation according to their dispersion degree in order to increase their diversity and search accuracy, respectively. Thirdly, the state weighting matrix Q and the control weighting matrix R in LQR were optimized using IQGA to obtain control increments for the trajectory tracking control of the driverless wheeled tractor with circular and double-shifted orbits. Finally, the tracking simulation of circular and double-shifted orbits based on the combination of Carsim and Matlab was carried out to compare the performance of LQR optimized by five algorithms, including traditional LQR, genetic algorithm (GA), particle swarm algorithm (PSO), quantum genetic algorithm (QGA), and IQGA. The simulation results show that the proposed IQGA speeds up the algorithm’s convergence, increases the population’s diversity, improves the global search ability, preserves the excellent information of the population, and has substantial advantages over other algorithms in terms of performance. When the tractor tracked the circular trajectory at 5 m/s, the root mean square error (RMSE) of four parameters, including speed, lateral displacement, longitudinal displacement, and heading angle, was reduced by about 30%, 1%, 55%, and 3%, respectively. When the tractor tracked the double-shifted trajectory at 5 m/s, the RMSE of the four parameters, such as speed, lateral displacement error, longitudinal displacement error, and heading angle, was reduced by about 32%, 25%, 37%, and 1%, respectively.

31 January 2019 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
LHLiupeng He
Liupeng He
CXChanggao Xia
Changgao Xia
SCSida Chen
Sida Chen
JGJiwei Guo
Jiwei Guo
YLYi Liu
Yi Liu
This paper is aimed to investigate the influence of dual‐mass flywheel (DMF) kinetic parameters on driveline torsional vibration in engine start‐up process, which prescribes the design requirements under start‐up condition for DMF matching. On the basis of driveline excitation analysis during engine start‐up, the analytical model of DMF driveline torsional vibration system is built and simulated. The vehicle start‐up test is conducted and compared with the simulation results. On account of the partial nonstationary characteristic of driveline during start‐up, the start‐up process is separated into 3 phases for discussing the influence of DMF rotary inertia ratio, hysteresis torque, and nonlinear torsional stiffness on attenuation effect. The test and simulation results show that the DMF undergoes severe oscillation when driveline passes through resonance zone, and the research model is verified to be valid. The DMF design requirements under start‐up condition are obtained: the appropriate rotary inertia ratio (the 1st flywheel rotary inertia‐to‐the 2nd flywheel rotary inertia ratio) is 0.7∼1.1; the interval of DMF small torsion angle should be designed as being with small damping, while large damping is demanded in the interval of large torsion angle; DMF should be equipped with low torsional stiffness when working in start‐up process.

31 December 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GSGaogao Shang
Gaogao Shang
GLGang Liu
Gang Liu
PZPeng Zhu
Peng Zhu
JHJiangyi Han
Jiangyi Han
CXChanggao Xia
Changgao Xia
KJKun Jiang
Kun Jiang
Recognition of the orchard environment is a prerequisite for realizing the autonomous operation of intelligent horticultural tractors. Due to the complexity of the environment and the algorithm’s dependence on ambient light, the traditional recognition algorithm based on machine vision is limited and has low accuracy. However, the deep residual U-type network is more effective in this situation. In an orchard, the deep residual U-type network can perform semantic segmentation on trees, drivable roads, debris, etc. The basic structure of the network adopts a U-type network, and residual learning is added in the coding layer and bottleneck layer. Firstly, the residual module is used to improve the network depth, enhance the fusion of semantic information at different levels, and improve the feature expression capability and recognition accuracy. Secondly, the decoding layer uses up-sampling for feature mapping, which is convenient and fast. Thirdly, the semantic information of the coding layer is integrated by skip connection, which reduces the network parameters and accelerates the training. Finally, a network was built through the Pytorch Deep Learning Framework, which was implemented to train the data set and compare the network with the fully convolutional neural network, the U-type network, and the Front-end+Large network. The results show that the deep residual U-type network has the highest recognition accuracy, with an average of 85.95%, making it more suitable for environment recognition in orchards.

12 August 2020 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
JWJunyan Wang
Junyan Wang
CXChanggao Xia
Changgao Xia
XFXin Fan
Xin Fan
JCJunyu Cai
Junyu Cai
This paper proposes a new transmission scheme of hydromechanical continuously variable transmission (HMCVT) for tractors. The HMCVT has 4 working ranges in each of the front and rear directions. The speed characteristic and the torque characteristic of HMCVT are theoretically derived. On the basis of HMCVT power flow direction, the KpeHec formula is used to calculate the transmission efficiency. Then, the image analysis method is used to study the influence of parameters on the transmission efficiency of HMCVT, and the main influencing factors are found. The results of theoretical derivation demonstrate that, by coordinating control of the HST displacement ratio and the engagement conditions of shifting clutches, the stepless speed regulation of HMCVT at the tractor speed of 0-50 km/h can be realized. The proposed HMCVT has the ability to continuously transmit and change torque over all working ranges. The overall transmission efficiency of HMCVT is at a high level. To verify the theoretical derivation, Amesim simulation software is used for the modeling and simulation of HMCVT. The simulation results are consistent with the theoretical analysis results. Therefore, the HMCVT proposed in this paper has the advantages of compact structure and high transmission efficiency, and it is suitable for matching tractors.

17 April 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WWWei Wang
Wei Wang
CXChanggao Xia
Changgao Xia
JHJiangyi Han
Jiangyi Han
Common visual simultaneous localization and mapping systems are built on the static environment hypothesis and fail to handle the substantial environmental dynamics. Particularly in highly dynamic environments, the pose estimation errors tend to accumulate rapidly, even causing the system to fail. To mitigate this limitation, we have developed DI-SLAM, an enhanced real-time SLAM system for dynamic indoor environments, extending the capabilities of ORB-SLAM3. DI-SLAM introduces a new parallel object detection thread, which employs an enhanced Yolov5s to extract semantic information in every input frame, enabling the filtering of dynamic features for initial tracking and localization. Additionally, we integrate multi-view geometry to further discriminate dynamic feature information, thereby increasing the precision and robustness of localization systems. Finally, experiments were executed on the TUM RGB-D dataset to prove the performance of the proposed algorithm. The results demonstrate strong performance on most datasets, showing a 97.06% improvement in localization accuracy over the original ORB-SLAM3 algorithm in indoor dynamic environments.