lu lin

Dr. lu lin


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2014 in Journal of Iron and Steel Research International
Verified
Journal Article
Closed access
LLlu lin
lu lin
YBYan-Ping Bao
Yan-Ping Bao
MWMin Wang
Min Wang
WJWei Jiang
Wei Jiang
HZHan-Mei Zhou
Han-Mei Zhou

6 December 2013 in Ironmaking & Steelmaking: Processes, Products and Applications
Verified
Journal Article
Closed access
LLlu lin
lu lin
YBY.-P. Bao
Y.-P. Bao
MWM. Wang
M. Wang
HZH.-M. Zhou
H.-M. Zhou
In order to effect enrichment of phosphorus in converter slag, phosphorus enrichment was researched by Al2O3 melting modification, the Al2O3 modification process is discussed according to the thermodynamic analysis, and phosphorus rich phase was separated from experimental slag by magnetic separation. The results show that gehlenite (Ca2Al2SiO7) and high phosphorus solid solution (n′C2S–C3P) are generated by the continuous reaction of n2CaO.SiO2–3CaO.P2O5 (nC2S–C3P) solid solution precipitated in the slag with Al2O3 at 1623K. The early precipitated solid solution (nC2S–C3P) is reduced with increasing content of Al2O3, and even disappeared. If the addition of Al2O3 is increased or excess in the slag, the high phosphorus solid solution (n′C2S–C3P) that was generated by the above mentioned reaction will continue to react with Al2O3 to produce gehlenite, then the phosphorus content in the phosphorus rich phase is increased. Through magnetic separation the amount of non-magnetic substance of no. 2 slag after modification is raised 26·88% compared to the original slag, the distribution ratio of P2O5 is raised from 0·96 to 4·61, and the amount of separated non-magnetic substance is 68·47% of the total no. 2 slag, 84·57% of the phosphorus in slag is entered into collected non-magnetic substance, thereby most phosphorus element was recycled.

10 August 2021 in International Journal of Minerals, Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
LLlu lin
lu lin
JZJia-Qing Zeng
Jia-Qing Zeng

1 January 2015 in ISIJ International
Verified
Journal Article
Open access
PDF file
LLlu lin
lu lin
YBYan-Ping Bao
Yan-Ping Bao
WJWei Jiang
Wei Jiang
QWQi-Fan Wu
Qi-Fan Wu
In order to recycle the phosphorus in P-bearing converter slag and make it used as slag phosphate fertilizer, the effect of Na2O in P-bearing steelmaking slag on phosphorus existence form, P2O5 solubility and magnetic separation behavior was researched systematically. The results show that the melting point of slag decreases obviously with the increasing of Na2O content in slag, and high phosphorus solid solution (Ca2SiO4–Ca3(PO4)2 and Na2Ca4(PO4)2SiO4) are generated by the continuous reaction of 6Ca2SiO4–Ca3(PO4)2 (for short 6C2S–C3P) solid solution precipitated in the slag with Na2O under the condition of 1623 K. The early precipitated 6C2S–C3P solid solution is reduced with the increasing content of Na2O even disappeared. If the addition of Na2O is increased or excess in the slag, the high phosphorus solid solution (Na2Ca4(PO4)2SiO4) that generated by the above mentioned reaction will continue to react with Na2O to produce Na3PO4, then the phosphorus content in the phosphorus-rich phase is heightened. Na2Ca4(PO4)2SiO4 and Na3PO4 have almost same good citric acid solubility with 6C2S–C3P solid solution. Therefore, adding appropriate Na2O content into slag can improve the slag P2O5 solubility, but the effect of different amounts of Na2O on the P2O5 solubility has little difference. Meanwhile, Added Na2O into slag can improve the metallization of slag and magnetism of iron-rich phase, make the magnetic substances content increased and separation of phosphorus and iron is incomplete, so it is adverse to phosphorus resources recovery from P-bearing slag by magnetic separation method. In order to recycle the phosphorus in P-bearing converter slag, adding appropriate Na2O content (<6%) into slag can be used as a flux to instead of fluorite for slag forming in steelmaking process.

22 June 2020 in Ironmaking & Steelmaking: Processes, Products and Applications
Verified
Journal Article
Closed access
LLlu lin
lu lin
YLYa-Qin Liu
Ya-Qin Liu
JZJian-Guo Zhi
Jian-Guo Zhi
SHSai He
Sai He
XLXiang Li
Xiang Li
LZLi-Qiang Zhang
Li-Qiang Zhang
To effectively recycle the phosphorus in P-bearing steelmaking slag and use it as slag phosphate fertilizer, it is necessary to study the effect of slag temperature on occurrence forms and enrichment behaviour of phosphorus in P-bearing steelmaking slag. In this work, the thermodynamic and kinetic behaviours of the formation of phosphorus-rich phases are systematically investigated. The results show that decreasing of the slag temperature (1473—1823 K) has a little effect on the thermodynamic trend of the formation of the 2CaO·SiO2 phase (denoted as C2S) and on the early precipitation of the n2CaO·SiO2–3CaO·P2O5 solid solution (denoted as n C2S–C3P). Additionally, the precipitation of C2S first increases and then decreases, and reaches a maximum value between 1623 and 1653 K. Moreover, the diffusion of phosphorus is a rate-limiting link in the process. The kinetic equation that describes the variation of P2O5 content with time in the phosphorus-rich phase is [ % P 2 O 5 ] S S [ % P 2 O 5 ] 0 = − 2.11472 e − t 51.04047 + 3.04849 . The composition of the P-bearing steelmaking slag is in the dicalcium silicate (C2S) primary zone. Controlling the hold temperature and time, and the cooling rate of the P-bearing slag, allows for high-concentration phosphorus enrichment and for the increase of particle size in the n C2S–C3P solid solution. Also, when controlling the aforementioned parameters, the phosphorus partition ratio between the phosphorus-rich and matrix phases (L p’) increases from 1.1–1.5 to 60–130, and the morphology of the former changes from acicular to fine bar to roughing bar. Furthermore, the P2O5 content in phosphorus-rich phase is 31%–33% in enriched slag, meeting the requirements for phosphate fertilizer production.

8 June 2018 in High Temperature Materials and Processes
Verified
Journal Article
Open access
PDF file
WWWei Wu
Wei Wu
PWPeng Wang
Peng Wang
LLlu lin
lu lin
SDShi-Fan Dai
Shi-Fan Dai
To improve the direct alloying of manganese ore in steelmaking, the decomposition and carbon reduction of manganese ore was studied using a differential thermal analyzer and resistance furnace. The remaining material after manganese ore decomposition at 1,600 °C was a mixture of 43 % MnO, 40 % MnSiO 3 and FeO, and 17 % MnSiO 3 . The remaining material after the carbon reduction of the manganese ore was a mixture of metal (30.8 % Mn 7 C 3 and 16.1 % FeC 3 ) and slag (2.5 % FeO, 5.1 % SiO 2 , and 18.8 % MnO). The high-temperature (1,200 ℃) decomposition and reduction of manganese ore produce manganese carbonate, manganese dioxide, and manganese salicylate sesquioxide. However, because it is not easy to decompose the manganese silicate in the manganese ore, the proportion of ore being reduced by carbon is small. Therefore, the increase of the manganese reduction of manganese silicate is critical to the direct alloying of manganese ore. Adding calcium oxide or magnesium oxide to the manganese ore improves the reduction of manganese ore, whereas adding slag from the initial stage or endpoint of the converter process has little effect on the manganese ore reduction.