Sensors for physiological signals and body motion status need a high level of sensitivity and quick response. A multi-scaled piezoelectric structure constructed by nanofibers that can detect minuscule pressures is expected to be made into wearable sensors. In this paper, a hierarchical nanofiber structure including barium titanate nanowires (BNWs) and polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) with dopamine-modified nanofiber membrane was prepared by coaxial electrospinning, and the sensitivity of the piezoelectric response was improved by introducing barium titanate nanowires and modifying dopamine. To determine the optimal parameters, a high-speed camera was introduced to explore the impacts of different spinning needles, flow rates, and core-shell solution concentrations. Then the optimal parameters were used to encapsulate the membrane into a sandwich-structure piezoelectric sensor, and the dynamic response to human body motion signals was tested. The sensing performance of the sensors has been thoroughly studied, including bending sensitivity (0.2025 V/°), maximum output voltage (0.93 V), hysteresis of dynamic signal capture (81 ms), and cyclic pressing durability (5 hours and 49 minutes at 1 Hz). In addition, the sensor was integrated into the knitted elbow straps and the insoles of sports shoes, providing a valuable resource for the analysis of human motion signals in smart wearable devices.
Flexible piezoelectric fibers are promising materials for next-generation wearable and flexible electronic devices due to their lightweight structure, mechanical flexibility, and electromechanical response. In this study, BaTiO3/PVDF composite fibers were prepared by melt spinning under an electrostatic field, followed by thermal drawing to enhance the electroactive phase content. The effects of BaTiO3 loading, draw ratio, thermal stretching ratio, stretching rate, and electric field strength on the crystalline structure of the fibers were systematically investigated. Fourier transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry, and electron microscopy were used to evaluate phase evolution, crystallinity, and filler distribution. The results showed that the processing conditions significantly influenced the transformation of PVDF from the α-phase to the electroactive β-phase. The optimized fibers were obtained at 1 wt.% BaTiO3, a thermal stretching ratio of 5, a stretching rate of 40 mm/min, and an electric field strength of 18 kV, resulting in a crystallinity of 61.3% and a β-phase content of 95.5%. The enhanced structural characteristics indicate the strong potential of the developed composite fibers for flexible electroactive applications, though direct electromechanical characterization is required for device integration.
Polyvinylidene fluoride (PVDF) is widely used in flexible sensors due to its excellent mechanical and piezoelectric properties. However, its performance is limited by low β -phase content and poor durability. This research optimizes PVDF-based piezoelectric films by incorporating binary and ternary copolymers, namely PVDF-trifluoroethylene and PVDF-trifluoroethylene-chlorotrifluoroethylene (PTC), using a tape casting and extrusion–calendaring process. A total of 18 blend compositions were evaluated, with a PVDF:PTC ratio of 1:1 identified as the optimal formulation, exhibiting the highest β -phase enhancement and improved ferroelectric response. Structural and electrical characterization was performed using Fourier transform infrared spectroscopy, X-ray diffraction, ferroelectric property testing, and impedance analyses, achieving values up to 250×10 −6 C N −1 . The optimized films demonstrated superior sensing performance, with high output voltage under dynamic finger tapping and strong linearity between the applied force and voltage response. Durability testing showed that the sensor retained >97% of its initial output after 8000 cycles and remained stable up to 11,100 loading cycles, indicating excellent mechanical robustness and long-term stability. Compared with pure PVDF, the optimized composite films exhibited significantly enhanced piezoelectric response, improved β -phase crystallinity, and better signal consistency. Finally, the films were successfully integrated into seamless wearable textiles for real-time motion sensing, demonstrating their applicability in smart sportswear. This study provides a scalable, effective approach to developing high-performance PVDF-based flexible sensors with enhanced efficiency, durability, and wearable compatibility.
Intelligent wearable fabrics featuring multimodal sensors capable of detecting human physiological signals have attracted considerable attention for next-generation health monitoring applications. Piezoelectric and thermoelectric functional polymers can be simultaneously engineered into fiber-based architectures; however, their sensitivity and synergistic response under multiple physical fields remain insufficiently understood and require systematic investigation. In this work, a three-dimensional flexible PPSF sensing unit with dual thermoelectric and piezoelectric response characteristics was developed by uniformly coating PEDOT/PSS onto the surface and PVDF spacer filaments of a 3D spacer fabric via in situ polymerization combined with phase separation, followed by post-treatment with dimethyl sulfoxide (DMSO) and ethylene glycol (EG). The fabrication process, surface morphology, and thermoelectric and mechanical properties, as well as air permeability of the PPSF, were comprehensively characterized. The Seebeck coefficient, electrical conductivity, and power factor were systematically evaluated. The optimized PPSF (5 vol % DMSO, 2 h EG treatment, 3 mm thickness) achieved a Seebeck coefficient of 25.6 μV K–1, an electrical conductivity of 0.33 S·cm–1, a power factor of 84.7 μW·m–1·K–2 at room temperature, and a rapid response time of approximately 1 s under ΔT = 1 K. Thirty p-/n-type PPSF sensing units were integrated in thermal parallel and electrical series to fabricate a pressure–temperature dual-mode flexible sensor, delivering output voltages of 15.3 mV (ΔT = 10 K) and 60.1 mV (ΔT = 40 K). Output voltage stability tests showed a slight initial decline within 5 min, followed by a stable plateau. In finger-pressing experiments, the flexible sensor independently and simultaneously responded to temperature and pressure stimuli, generating distinct voltage and current signals.