In this work, the problem of hydrodynamic, heat and mass transfer and stability in a salt gradient solar pond has been numerically studied by means of computational fluid dynamics in transient regime. The body of the simulated pond is an enclosure of height H and length L wherein an artificial salinity gradient is created in order to suppress convective motions induced by solar radiation absorption and to stabilize the solar pond during the period of operation. Here we show the distribution of velocity, temperature and salt concentration fields during energy collection and storage in a solar pond filled with water and constituted by three different salinity zones. The bottom of the pond is blackened and the free-surface is subjected to heat losses by convection, evaporation and radiation while the vertical walls are adiabatic and impermeable. The governing equations of continuity, momentum, thermal energy and mass transfer are discretized by finite–volume method in transient regime. Velocity vector fields show the presence of thin convective cells in the upper convective zone (UCZ) and large convective cells in the lower convective zone (LCZ). This study shows the importance of buoyancy ratio in the decrease of temperature in the UCZ and in the preservation of high temperature in the LCZ. It shows also the importance of the thickness of Non-Convective Zone (NCZ) in the reduction of the upwards heat losses.
This work aims to characterize the hydrodynamic and thermal behaviors in an innovative scraped surface heat exchanger (SSHE) equipped with helical ribbon by means of the numerical simulation approach. In this study, the conservation equations of continuity, momentum, and energy in the laminar, steady-state and isothermal conditions are resolved using a specific computational fluid dynamics (CFD) code based on the 3D finite volume method. The effects of the gap between the exchanger wall and the tip of the ribbon, the ribbon width, and the number of turns in the ribbon on the hydrodynamic and thermal behaviors are studied. Varying the gap values leads to reveal an optimum value giving the highest heat transfer coefficient. Moreover, numerical results have shown that increasing the ribbon width improves the heat transfer. Furthermore, the influence of the number of turns is carried out for Reynolds number ratios (Rer/Rea) inferior and superior to 1. Results revealed that increasing the number of turns avoids the back-mixing phenomenon and thus improves the heat transfer. In this study, the establishment of correlation is determined with the introduction of dimensionless and geometrical groups to predict the heat transfer coefficient in SSHE.