As one of the most promising alternatives for future energy systems, the rechargeable Zn–air battery (ZAB) has attracted extensive attention due to its extraordinarily high theoretical specific energy density. However, several obstacles restrict its practical application. One challenge is the sluggish kinetics of oxygen-reduction reaction (ORR) and oxygen-evolution reaction (OER) in the discharging and charging processes of ZABs. In addition, when using unifunctional ORR or OER electrocatalysts as air electrodes, like noble metal catalysts (Pt/C or Ru/IrO2), there are the disadvantages of high cost and poor stability. Therefore, rational design of non-noble metal bifunctional ORR/OER electrocatalysts with high activity and stability is essential for the development of ZABs. In this review, we discuss the latest developments of non-noble metal bifunctional ORR/OER electrocatalysts for ZABs. Firstly, the related reaction mechanisms of ORR and OER are introduced. Then, the latest developments of bifunctional ORR/OER materials for ZABs are discussed in detail from three aspects: (i) MOF-based catalysts, including pristine MOFs and their derivatives; (ii) metal-free-based carbon catalysts, including heteroatom-doped carbon and defective carbon; (iii) metal-based catalysts, including metal–nitrogen–carbon materials (such as metals/alloys, single-atom) and metal compound materials. Finally, some challenges and outlooks for the optimal design of bifunctional air electrodes for rechargeable ZABs with high activity and ultra-long lifetime are put forward.
Zn–air batteries (ZABs) have attracted considerable attention due to the growing requirement for energy storage systems with high-energy density and safety. Meanwhile, the reasonable design of robust and cut-price bifunctional oxygen electrocatalysts is greatly desired for ZABs. Herein, a simple method to develop MOF (metal–organic framework)-derived hierarchical Fe,Co@N–C materials (FeCo–N–C-T), has been developed for effectively electrocatalyzing the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) based on ZnCo–ZIFs encapsulated with Fe-doped glucosamine (ZnCo–ZIF@Fe/glucosamine). Compared with commercial Pt/C and RuO2, the newly developed FeCo–N–C-700 exhibited superior electrocatalytic properties for the ORR (half-wave potential of 0.896 V) and OER (overpotential of 370 mV at 10 mA cm−2) and a reversible oxygen overpotential of 0.71 V. Simultaneously, it was demonstrated that the combination of Fe and Co showed synergistic improvements on the bifunctional activity. As a proof of concept, liquid- and solid-state Zn–air batteries (ZABs) were fabricated with FeCo–N–C-700 as air-cathodes. The developed liquid-ZABs exhibited an ultrahigh peak power density (150 mW cm−2 at 240 mA cm−2) and robust cycling stability (no obvious decay after more than 360 Please change to–discharging cycles), outperforming those based on commercial Pt/C + RuO2. As expected, all-solid-state ZABs based on FeCo–N–C-700 exhibited excellent reversibility and durability. In addition, density functional theory (DFT) investigations revealed that FeCoN8 was more active than Fe/CoN4 for the ORR and OER, indicating the synergetic effect of the Fe and Co active sites in FeCo–N–C-700 affording superior electrocatalytic performance.
Dye-sensitized solar cells (DSSCs) are currently under intense academic and industrial investigations, because of their environmentally-friendly, efficient, and low-cost features. The photosensitizer plays a key role in determining DSSCs' performance. The 4,4′-di(2-thienyl)triphenylamine moiety, included in dye TTC102, has been demonstrated before as a novel and efficient electron donor fragment. In this paper, the oversimple π-conjugated bridge of TTC102 was replaced by a 9-ethyl-3,6-di(2-thiophenyl)carbazole moiety. Two new D-D-π-A sensitizers, named TTC104 and TTC105, were synthesized and fully characterized. After anchoring on TiO2 nanoparticle film, the absorption band of TTC104 is broader by 30 nm than that of TTC102. Under AM 1.5G irradiation, the energy conversion efficiency (η) of a DSSC based on TTC104 reaches 6.36%, which is 21.6% higher than that of TTC102 (5.24%). The results above demonstrate that the photovoltaic performance can be improved after introducing the 9-ethyl-3,6-di(2-thiophenyl)carbazole moiety to TTC102 when employed in DSSCs. Dye TTC105, containing a pyridyl group as the electron acceptor, showed only 1.88% conversion efficiency (η) when used in DSSCs. The huge different performances of TTC104 and TTC105 are proved to be partly due to the smaller dye loading amount, higher dark current and charge recombination rate of TTC105.
Three supramolecular isomers, {[Cd2(TPOM)(hfipbb)2]·x/y/zsolvent}n (1–3), have been synthesized and characterized by one-pot reaction. Even though the compositions of 1–3 are the same, they generate different structures. Reactions over various time periods were found to influence the formation of supramolecular isomers, and there is little influence on this system under other conditions.