We report design, fabrication, and characterization of thermo-optic Mach–Zender interferometric modulators and directional-coupler switches whose operation utilizes the long-range surface-plasmon-polariton waveguiding along 15-nm-thin and 8-μm-wide gold stripes embedded in polymer and heated by electrical signal currents. The devices are characterized at the light wavelength of 1.55 μm, featuring low driving powers ($<10\mathrm{mW}$ for modulators and $<100\mathrm{mW}$ for switches), high extinction ratios ($>30\mathrm{dB}$ ), moderate response times $(\sim 1\mathrm{ms})$ , and the total (fiber-to-fiber) insertion loss of $\sim 13\mathrm{dB}$ (for modulators) and $\sim 11\mathrm{dB}$ (for switches) when using single-mode fibers.

Using near-field optical microscopy, we investigate propagation and scattering of surface plasmon polaritons (SPP's) excited in the wavelength range of 780-820 nm at nanostructured gold-film surfaces with areas of 200-nm-wide scatterers arranged in a 400-nm-period triangular lattice containing line defects. We observe the SPP reflection by such an area and SPP guiding along line defects at 782 nm, as well as significant deterioration of these effects is 815 nm, thereby directly demonstrating the SPP band gap effect and showing first examples of SPP channel waveguides in surface band gap structures.

New optical waveguide technology for integrated optics, based on propagation of long-range surface plasmon polaritons (LR-SPPs) along metal stripes embedded in dielectric, is presented. Guiding and routing of electromagnetic radiation along nanometer-thin and micrometer-wide gold stripes embedded in polymer via excitation of LR-SPPs is investigated in the wavelength range of 1250-1650 nm. LR-SPP guiding properties, such as the propagation loss and mode-field diameter, are investigated for different stripe widths and thicknesses. A propagation loss of /spl sim/6 dB/cm, a coupling loss of /spl sim/0.5 dB (per facet), and a bend loss of /spl sim/5 dB for a bend radius of 15 mm are evaluated for 15-nm-thick and 8-/spl mu/m-wide stripes at the wavelength of 1550 nm. LR-SPP-based 3-dB power Y-splitters, multimode interference waveguides, and directional couplers are demonstrated and investigated. At 1570 nm, coupling lengths of 1.9 and 0.8 mm are found for directional couplers with, respectively, 4- and 0-/spl mu/m-separated waveguides formed by 15-nm-thick and 8-/spl mu/m-wide gold stripes. LR-SPP-based waveguides and waveguide components are modeled using the effective-refractive-index method, and good agreement with experimental results is obtained.

In-line polarimeters perform nondestructive polarization measurements of optical signals, and play a critical role in monitoring and controlling the polarization environment in, for example, optical networks. While current in-line polarimeters are constructed with multiple optical components, either fabricated into an optical fiber or using free-space optics, we present here a novel architecture conducive to monolithic on-chip integration. This enables the scalable fabrication of high-performance polarization sensors with exceptional stability, compactness, and speed. The method relies on the detection of the highly polarization-dependent scattered field of a subwavelength antenna array known as a metasurface, and is shown here to provide polarization state measurements matching those of a state-of-the-art commercial polarimeter.

Long-range surface-plasmon-polariton (LR–SPP) waveguiding along thin gold stripes embedded in polymer is investigated in the wavelength range of 1510–1620 nm. LR–SPP intensity distributions at the output are measured for different stripe widths and thicknesses. Coupling loss of ∼0.5 dB is achieved when exciting the fundamental LR–SPP mode along 10-nm-thick stripes of 6–10 μm width with a polarization maintaining fiber. LR–SPP propagation loss of 6–8 dB/cm is estimated (at 1550 nm) and attributed to scattering from inhomogeneities of the metal stripe and polymercladding.