Pollution with organic dyes is one of the most typical environmental problems related to industrial wastewater. The removal of these dyes opens up new prospects for environmental remediation, but the design of sustainable and inexpensive systems for water purification is a fundamental challenge. This paper reports the synthesis of novel fortified hydrogels that can bind and remove organic dyes from aqueous solutions. These hydrophilic conetworks consist of chemically modified poly(ethylene glycol) (PEG-m) and multifunctional cellulose macromonomers (“cellu-mers”). Williamson etherification with 4-vinylbenzyl chloride (4-VBC) is used to modify PEGs of different molecular masses (1, 5, 6, and 10 kDa) and cellobiose, Sigmacell, or Technocell™ T-90 cellulose (products derived from natural renewable resources) with polymerizable/crosslinkable moieties. The networks are formed with good (75%) to excellent (96%) yields. They show good swelling and have good mechanical properties according to rheological tests. Scanning electron microscopy (SEM) reveals that cellulose fibers are visibly embedded into the inner hydrogel structure. The ability to bind and remove organic dyes, such as bromophenol blue (BPB), methylene blue (MB), and crystal violet (CV), from aqueous solutions hints at the potential of the new cellulosic hydrogels for environmental cleanup and clean water safeguarding.

Macromolecules obtained from renewable natural sources are gaining increasing attention as components for a vast variety of sustainable polymer-based materials. Natural raw materials can facilitate continuous-flow production due to their year-round availability and short replenishment period. They also open new opportunities for chemists and biologists to design and create “bioreplacement” and “bioadvantaged” polymers, where complex structures produced by nature are being modified, upgraded, and utilized to create novel materials. Bio-based macromonomers are expected not only to compete with but to replace some petroleum-based analogs, as well. The development of novel sustainable materials is an ongoing and very dynamic process. There are multiple strategies for transforming natural macromolecules into sophisticated value-added products. Some methods include chemical modification of macromolecules, while others include blending several components into one new system. One of the most promising approaches for incorporating renewable macromolecules into new products is the synthesis of hybrid networks based on one or more natural components. Each one has unique characteristics, so its incorporation into a network brings new sustainable materials with properties that can be tuned according to their end-use. This article reviews the current state-of-the-art and future potential of renewable natural macromolecules as sustainable building blocks for the synthesis and use of hybrid polymer networks. The most recent advancements and applications that involve polymers, such as cellulose, chitin, alginic acid, gellan gum, lignin, and their derivatives, are discussed.

Herewith we report the first attempt towards non-covalent immobilization of Trametes versicolor laccase on neat and magnetically responsive highly porous polyamide 6 (PA6) microparticles and their application for catechol oxidation. Four polyamide supports, namely neat PA6 and such carrying Fe, phosphate-coated Fe and Fe₃O₄ cores were synthesized in suspension by activated anionic ring-opening polymerization (AAROP) of ε-caprolactam (ECL). Enzyme adsorption efficiency up to 92% was achieved in the immobilization process. All empty supports and PA6 laccase complexes were characterized by spectral and synchrotron WAXS/SAXS analyses. The activity of the immobilized laccase was evaluated using 2,2’-Azino-bis-(3- ethylbenzothiazoline-6-sulfonic acid (ABTS) and compared to the native enzyme. The PA6 laccase conjugates displayed up to 105% relative activity at room temperature, pH 4, 40 °C and 20 mM ionic strength (citrate buffer). The kinetic parameters of the ABTS oxidation were also determined. The reusability of the immobilized laccase-conjugates was proven for five consecutive oxidation cycles of catechol.

This study targets the synthesis of novel semi-interpenetrating networks and amphiphilic conetworks, where hydrophilic soft matter (Gellan Gum, GG) was combined with hydrophobic rigid poly(styrene), PSt. To achieve that, GG was chemically modified with 4-vinyl benzyl chloride to form a reactive macromonomer with multiple double bonds. These double bonds were used in a copolymerization with styrene to initially form semi-interpenetrating networks (SIPNs) where linear PSt was intertwined within the GG-PSt conetwork. The interpenetrating linear PSt and unreacted styrene were extracted over 3 consecutive days with yields 18–24%. After the extraction, the resulting conetworks (yields 76–82%) were able to swell both in organic and aqueous media. Thermo-mechanical tests (thermal gravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis) and rheology indicated that both SIPNs and conteworks had, in most cases, improved thermal and mechanical properties compared to pure poly(styrene) and pure GG gels. This crosslinking strategy proved that the reactive combination of a synthetic polymer and a bio-derived constituent would result in the formation of more sustainable materials with improved thermo-mechanical properties. The binding ability of the amphiphilic conetworks towards several organic dyes was high, showing that they could be used as potential materials in environmental clean-up.

In this paper, we describe a novel method for preparation of polymer composites with homogeneous dispersion of natural fibers in the polymer matrix. In our approach, Williamson ether synthesis is used to chemically modify cellulose with polymerizable styrene moieties and transform it into a novel multifunctional cellu-mer that can be further crosslinked by copolymerization with styrene. Reactions with model compounds (cellobiose and cellotriose) successfully confirm the viability of the new strategy. The same approach is used to transform commercially available cellulose nanofibrils (CNFs) of various sizes: Sigmacell and Technocell™ 40, 90 and 150. The styrene-functionalized cellulose oligomers and CNFs are then mixed with styrene and copolymerized in bulk at 65 °C with 2,2′-azobisisobutyronitrile as initiator. The resulting composites are in a form of semi-interpenetrating networks (s-IPN), where poly(styrene) chains are either crosslinked with the uniformly dispersed cellulosic component or entangled through the network. Non-crosslinked poly(styrene) (31–41 w%) is extracted with CHCl₃ and analyzed by size-exclusion chromatography to estimate the extent of homopolymerization and reveal the mechanism of the whole process. Electron microscopy analyses of the networks show the lack of cellu-mer agglomeration throughout the polymer matrix. The homogeneous distribution of cellulose entities leads to improved thermal and mechanical properties of the poly(styrene) composites compared to the physical mixtures of the same components and linear poly(styrene) of similar molecular mass.