Jiangsu Key Laboratory for Design and Fabrication of Micro-Nano Biomedical Instruments, School of Mechanical Engineering, Southeast University, Nanjing 211189, China
Dr. Zhiyong Wei
Jiangsu Key Laboratory for Design and Fabrication of Micro-Nano Biomedical Instruments, School of Mechanical Engineering, Southeast University, Nanjing 211189, China
Phonon transport in the c-axis direction of graphite thin films has been studied using non-equilibrium molecular dynamics (MD) simulation. The simulation results show that the c-axis thermal conductivities for films of thickness ranging from 20 to 500 atomic layers are significantly lower than the bulk value. Based on the MD data, a method is developed to construct the c-axis thermal conductivity as an accumulation function of phonon mean free path (MFP), from which we show that phonons with MFPs from 2 to 2000 nm contribute ∼80% of the graphite c-axis thermal conductivity at room temperature, and phonons with MFPs larger than 100 nm contribute over 40% to the c-axis thermal conductivity. These findings indicate that the commonly believed value of just a few nanometers from the simple kinetic theory drastically underestimates the c-axis phonon MFP of graphite.
Most standard models for the thermal boundary conductance (TBC) assume isotropic properties and thus are inappropriate for layered and chainlike materials such as graphite, BiTe, and high-density polyethylene (HDPE). To model such anisotropic materials, here a framework is introduced whereby the first Brillouin zone and the isoenergy surfaces of the Debye dispersion relation are both generalized from spherical to ellipsoidal. This model is checked by comparison with the experimental specific heat capacity of graphite and HDPE, as well as the phonon irradiation of graphite calculated from lattice dynamics. The anisotropic TBC model performs at least six times better than the standard isotropic diffuse mismatch model at explaining the measured TBC between graphite and various metals reported by Schmidt et al. [ J. Appl. Phys. 107, 104907 (2010)]. The model further reveals an unexpected guideline to engineer the TBC: due to phonon focusing effects, in many cases the TBC across an interface can be increased by reducing a phonon velocity component parallel to the plane of the interface.
Measurements of thermal transport through contacts between individual multiwall carbon nanotubes show that, contrary to common expectation, the normalized contact thermal conductance per unit area depends linearly on the tube diameter. The result is corroborated with and extended to multilayer graphene nanoribbons through molecular dynamics simulations. Semiquantitative analyses show that these intriguing observations are consistent with an explanation based on an unexpectedly large phonon mean free path in the $c$-axis direction of graphite, phonon reflection at free surfaces, and phonon focusing in highly anisotropic graphitic materials.
Molecular dynamics simulation is performed to extract the phonon dispersion and phonon lifetime of single layer graphene. The mode dependent thermal conductivity is calculated from the phonon kinetic theory. The predicted thermal conductivity at room temperature exhibits important quantum effects due to the high Debye temperature of graphene. But the quantum effects are reduced significantly when the simulated temperature is as high as 1000 K. Our calculations show that out-of-plane modes contribute about 41.1% to the total thermal conductivity at room temperature. The relative contribution of out-of-plane modes has a little decrease with the increase of temperature. Contact with substrate can reduce both the total thermal conductivity of graphene and the relative contribution of out-of-plane modes, in agreement with previous experiments and theories. Increasing the coupling strength between graphene and substrate can further reduce the relative contribution of out-of-plane modes. The present investigations also show that the relative contribution of different mode phonons is not sensitive to the grain size of graphene. The obtained phonon relaxation time provides useful insight for understanding the phonon mean free path and the size effects in graphene.