Groundwater salinity is a serious problem for water quality in the irrigated parts of arid and semi-arid regions, especially in the aquifers of Berrechid, Morocco. This study used a variety of techniques, including the Water Quality Index (WQI) and World Health Organization (WHO) recommended...
The El Malleh dam reservoir is an important water source for irrigation and protection against flooding in the Mohammedia region of the kingdom of Morocco. However, flash floods threaten the sustainability of the reservoir by sedimentation and water quality contamination. Pollution sources could arise from sediment mobilization in the reservoir bottom, or carry by water flow from the watershed to the dam reservoir. The current study evaluates the surface and pore water quality, focuses on their behaviour based on the laboratory results, the Water Quality Index (WQI) and statistical analysis. The results show that the concentration of nutrients was not significant. The concentrations of major elements differ from surface waters to pore waters and from one parameter to another. For instance, the Cl concentration in the surface water ranged from 852 mg L−1 to 1065 mg L−1, and from 10 mg L−1 to 7810 mg L−1 for pore water. Besides that, the calculation of WQI indicated that the sediment pore water quality was unsuitable, and the surface waters quality was in a poor and very poor category.
4 March 2024 in Sustainable Water Resources Management
Enhancing the energy efficiency of administrative buildings is a critical factor in advancing global energy sustainability. This research introduces a methodology for refining thermal loads and minimizing energy consumption through computational simulations using the HAP (Hourly Analysis Program) tool. The primary goal is to transform an energy-demanding administrative structure into an environmentally sustainable and high-performance facility. A comprehensive assessment of the building’s initial state uncovered structural inefficiencies influencing its energy demand, particularly regarding insulation, air circulation, and lighting. By incorporating advanced architectural and engineering solutions, including upgraded insulation, LED lighting implementation, and optimized HVAC system configurations, the findings indicate a considerable reduction in energy usage. This study emphasizes the necessity of integrating ASHRAE regulations and computational simulation methodologies in advancing building energy performance.