The emerging software defined networking enables the separation of control plane and data plane and saves the resource consumption of the network. Breakthrough in this area has opened up a new dimension to the design of software defined method in wireless sensor networks (WSNs). However, the limited routing strategy in software defined WSNs (SDWSNs) imposes a great challenge in achieving the minimum traffic load. In this paper, we propose a flow splitting optimization (FSO) algorithm for solving the problem of traffic load minimization (TLM) in SDWSNs by considering the selection of optimal relay sensor node and the transmission of optimal splitting flow. To this end, we first establish the model of different packet types and describe the TLM problem. We then formulate the TLM problem into an optimization problem which is constrained by the load of sensor nodes and the packet similarity between different sensor nodes. Afterwards, we present a Levenberg-Marquardt algorithm for solving the optimization problem of traffic load. We also provide the convergence analysis of the Levenberg-Marquardt algorithm. Finally, we implement the FSO algorithm in the NS-2 simulator and give extensive simulation results to verify the efficiency of FSO algorithm in SDWSNs.
Nowadays, Device-to-Device (D2D) communication in LTE system has been proposed as a possible candidate for vehicle-to-vehicle(V2V) communication. As V2V communications share the same licensed frequency spectrum pool with typical UEs communications in one LTE cell, efficient radio resource allocation is a challenging issue. In this paper, we proposed a traffic flow based dynamic resource allocation algorithm for vehicular communication networks, which could make radio resource to be utilized in a more efficient way with a flexible node-grouping algorithm. The simulation results show, compared with random allocation and greedy allocation algorithms, the proposed algorithm can significantly reduce running time and significantly improve spectrum utilization efficiency.
To improve the response speed and quality of Internet of Things (IoT) services and reduce system operating costs, this paper refines the edge layer according to the different data transmission capabilities of different edge devices, constructs a four-layer heterogeneous IoT framework under cloud–edge–end (CEE) collaboration, and gives the corresponding data hierarchical transmission strategy, so as to effectively process sensitive data such as real-time, near-real-time, and non-real-time data. Meanwhile, the link based high-performance adaptive load balancing scheme is developed to achieve the dynamic optimal allocation of system resources. Simulation results demonstrate that the data hierarchical transmission strategy based on a CEE collaboration framework can not only make full use of resources and improve the successful delivery rate of packets but can also greatly reduce the end-to-end transmission delay of data. Especially, compared with the cloud-mist framework without refining the edge layer, the data transmission rate based on CEE collaboration architecture is increased by about 27.3%, 12.7%, and 8%, respectively, in three network environments of light-weight, medium, and heavy load.
The software-defined (SD) and edge computing (EC) are emerging technologies that have been used to improve the network operation efficiency of wireless sensor networks (WSNs). Due to the advantages of the SD and EC technologies, the area of WSNs has achieved a new dimension and breakthrough. However, the limited energy allocation mechanism in edge-SD wireless sensor networks (ESDWSNs) makes the energy consumption of different nodes unbalanced. In this paper, we propose an energy allocation optimization (EAO) algorithm that solves the energy averaging and minimization (ECAM) problem in ESDWSNs by selecting appropriate relay nodes and de-duplicated data flows. Specifically, we first establish a novel three-layer network architecture based on the edge computing and software-defined technologies. Then we proposed the ECAM problem, which minimizes the energy consumption in ESDWSNs. Furthermore, we propose an adaptive Levenberg-Marquardt algorithm and derive the optimization value of energy cost function. The extensive simulation results based on the NS-2 simulator demonstrate the energy balance efficiency of the EAO algorithm in ESDWSNs.
Resource-constrained wireless sensor networks (WSNs) impose a substantial challenge to the transmission and processing of non-redundant perceptual data. Moreover, breakthroughs in this area have opened up a new dimension that integrates edge computing technology in wireless sensor networks. However, achieving reliable data distribution in wireless sensor networks with edge computing (EWSN) and balancing the link bandwidth and node energy resources have become challenging problems. In this article, we propose a joint bandwidth allocation and energy consumption (JBAEC) algorithm for distributing different perceptual data to different sensor nodes of the EWSN by considering the available transmission links between the source sensor and destination nodes under the condition of early perceived energy. Therefore, we first establish the model of different data packet types and energy detection costs. Second, we describe the problem of effective bandwidth allocation and prove its NP-hard feature. In addition, we formulate the bandwidth allocation problem as an optimization problem that is divided into the two states of sufficient energy and lack of energy. Afterwards, we present an available node selection (ANS) algorithm for sorting the available relay nodes under the condition of different energy-sufficient nodes. The effective transmission network construction (ETNC) algorithm selects the available transmission links based on the set of available nodes. Finally, we implement the JBAEC algorithm by using the NS-2 simulator and present extensive simulation results to verify the data distribution efficiency of the JBAEC algorithm in the EWSN.