The full waveform effects refer to the total effects of turn-on, steady, and turn-off durations for a transmitting-current waveform as well as its repetition number in transient electromagnetic (TEM) methods. In this study, the full waveform effects are investigated using both forward-modelling and inversion methods considering typical background noise. The forward-modelling results of homogeneous half-space models show that the magnetic induction, bz, is less affected by the background noise but more affected by the full waveform effects than the time derivative of magnetic induction ∂bz/∂t. Therefore, this study focuses on investigating the full waveform effects on bz. The inversion results for synthetic and field examples show that the inversion algorithm without considering the full waveform effects leads to over-estimated resistivities in deeper parts of the recovered models compared to the true model. Therefore, it is crucial to consider the full waveform effects when processing TEM data. Furthermore, a standard deviation factor (STDF) is estimated for model parameters of the inversion. The results show that the STDF increases as the layer depth increases for 1D layered models. This indicates that the inverted parameters are well resolved for shallower layers and moderately to poorly resolved for deeper layers.
The Qingchengzi orefield is an important polymetallic ore concentration zone in the northern margin of the North China Craton (NCC). The region has significant metallogenic potential for deep mining. Many areas with gold mineralization have been found in the shallow area of Taoyuan–Xiaotongjiapuzi–Linjiasandaogou in the east of the Qingchengzi orefield. To assess the distribution of mineralization levels, we carried out deep exploration using the transient electromagnetic method (TEM). A superconductive quantum interference device (SQUID) magnetometer and a conventional induction coil were used for field data acquisition. The SQUID data inversion results reflect the bottom interface of the high-conductivity area, the fold state of the underlying dolomite marble stratum, and the deep structural characteristics of the syncline. Secondary crumples appear in the inversion results of the southern segment of TEM, which is inferred as a favorable area for deep gold mineralization. Negative values appear in the SQUID data of some stations, to varying degrees. This induced polarization phenomenon may be related to deep gold mineralization.
The Meijiayan landslide in Pengshui County within Chongqing City is a medium-scale soil landslide triggered by the excavation of roadbeds. To delve into the influencing factors and assess the stability of this landslide, it is crucial to meticulously map the subterranean geological framework of the area. Such an analysis lays the groundwork for evaluating and mitigating the risks of future landslide instabilities. In this context, the semi-airborne transient electromagnetic method (SATEM), which is complemented by a receiving system mounted on an aerial platform, stands out as an innovative geophysical exploration technique. This method is adept at conducting swift measurements across complex terrains, making it particularly valuable for areas prone to such geological events. This paper presents the utilization of a cutting-edge loop source SATEM system, which was operationalized via a rotor-based unmanned aerial vehicle (UAV). The system was employed to conduct shallow geological structure detection experiments on the Meijiayan landslide. The SATEM detection outcomes have unveiled fluctuations in the electrical distribution across the upper strata, which are indicative of the subsurface geological boundaries, faults, and areas potentially rich in water within the landslide region. These discoveries affirm the viability of utilizing loop source SATEM for the identification of shallow geological structures in regions susceptible to landslides. The findings indicate that while the landslide is currently in a stable condition, it poses a significant risk of movement, especially during the rainy season, with the potential for landslides to be exacerbated by extreme or sustained rainfall events.
To take full advantage of the multicomponent transient electromagnetic method, we summarize the advantages of multicomponent exploration based on simulation calculation. We have carried out experiments on the effectiveness of the method in the known copper-nickel mining area. The results show that the characteristic curve of the horizontal component can effectively point to the central direction of the low-resistivity ore body and reflect the occurrence of the ore body. The degree of coupling between the vertical component and the ore body is high, which is beneficial for quantitative inversion. The results for the horizontal component and vertical component interpretations are consistent, which reduces the limitation of conventional single vertical component interpretation and effectively improves the work efficiency in field work.
The borehole transient electromagnetic (TEM) method can be useful in deep mineral exploration to detect blind ore bodies beside or below the borehole, and is especially adapted to finding small-scale, deep, rich ore bodies. In this method a transmitting loop is deployed on the top surface of the Earth, while a receiving coil is moved down the borehole. As the borehole TEM method is limited by the borehole’s location and depth, so its exploration scope is limited. The surface to airborne TEM method is a semi-airborne TEM configuration that transmits on the surface and receives TEM response in air. The two systems are combined into one system in this study, sharing the transmission loop deployed on the surface. With this combined system, the TEM response in the borehole and in the air can be observed at the same time. This paper employs a joint interpretation method based on the equivalent filament, which is introduced to obtain more reliable geometric information for the target with both borehole and aerial TEM data. The eddy currents induced in a thin confined conductor can be represented by equivalent current filaments, and the distribution of filaments can reflect the position and geometry of the conductor. Therefore, geometric parameters of targets can be obtained by filament inversion, and the joint inversion can be more accurate with both borehole and aerial response. Numerical modeling results show that the joint inversion based on the equivalent filament results can reliably obtain the geometric parameters of the thin conductive plate embedded in half space.
14 February 2024 in Journal of Geophysics and Engineering
The karst strata in the southwestern mountainous areas of China are extensively developed, creating a fragile geological environment. Landslide geological disasters occur frequently in these areas due to high annual rainfall, concentrated time periods, and frequent human engineering activities. Conventional ground geophysical methods face challenges in complex terrains, making it difficult to quickly and reliably obtain underground structures in landslide-prone areas. The semi-airborne transient electromagnetic method (SATEM) combines ground-based transmission and airborne reception of electromagnetic responses. This method, characterized by large emission magnetic moment and rapid data collection in the air, offers advantages in detecting deep geological structures in complex terrain areas. This article presents the application of a newly developed loop source SATEM system, integrated with multi-rotor unmanned aerial vehicles (UAVs), to conduct deep geological structure detection experiments on a large-scale landslide. The inversion results clearly depict the spatial distribution of the Feixianguan Formation and Longtan Formation, as well as vertical fractures developed in the strata due to underground coal mining. The detection test demonstrates the applicability of the SATEM method in detecting underground structures in Karst Plateau special landform areas, providing a new detection approach for similar regions.