Analytical expressions for the delay times of three types of the low-pass filters (Bessel, Butterworth, Chebyshev filters) as the functions of the filter order are obtained. These filters are a part of the input circuits of the analog-to-digital interface of the instrumentation and control systems (ICSs) and serve to reduce the value of the aliasing error (the anti-alias filters). The signal delay in the filters causes significant dynamic errors in the instrumentation and control systems that reduce the tolerance frequency of the sensor signal sampling. Using the Filter Solution application programs and the NI LabVIEW software environment the analytical expressions for the delay times of three types of filters at linear and polynomial approximation were obtained. The analysis of the obtained results enabled us to turn attention to the significant value of the dynamic errors due to the signal delay of the sensor in the anti-alias filter that makes their use in some instrumentation systems problematic.
The article presents a scheme of active RC-filter of the second order (ARCF), which is realized on multidifferential operational amplifiers (DDA). Based on this filter, we can obtain a various amplitude-frequency characteristic (AFC) (low-pass filters (LPF) and high-pass (HPF) filters, band-pass (BPF) and rejection (RF)filters). The main difference between the developed ARCF and the known ones is that when adjusting the quality factor of the pole, their pole frequency and transmission coefficient do not change.
The application features of digital potentiometers as controlled elements for the tasks of setting active RC-filters in the structure of communication systems analog interface and automatic control are considered. The research paper is based on a selected method of parameters for setting circuits with digital potentiometers providing necessary precision and setting ranges. The sections contain examples oriented for application of setting circuits of active RC-filters with digital potentiometers.
1 January 2019 in Advances in Science, Technology and Engineering Systems Journal
The design issues of anti-aliasing filters (AAF), which are included in the input circuit of the analog sensor signals, are considered. Analog (AAAF) and digital (DAAF) AAFs provide a aliasing error (γA) at the time sampling of sensor signals in control and monitor systems (CMSs). It is shown that AAAF can't be formed only on the basis of DAAF. This is due to the fact that in CMSs the value γ H is determined to a large extent by the parameters of input AAAF, without which it can not be done. The function of AAAFs can sometimes be discharged by unitizing transducers of sensors or simple additional analog filters of low order. Numerical values are determined in the NI LabVIEW software environment at low orders of the AAAF. It is shown that the efficiency of AAAF is improved with a decrease of the permitted value of γ H . It is established that the calculation of the dynamic error of the analog-digital AAF is complicated by the signal delay, but the order of value of the error remains the same as in AAAF. It is concluded that the separation of filtering between the analog and digital parts of AAAF should be solved as a part of the task of allocation of the error in the input circuits of CMSs.
A method is proposed for increasing the guaranteed attenuation of the amplitude-frequency characteristic of the active RC filter (ARCF) for processing piezoelectric signals of sensors outside the band-pass of the desired signal. This effect is provided by the balanced differential input of the ARCF and the original circuit design of its basic functional units. The results of computer simulation and experimental research of the ARCF in the structure of the measuring system of the machine for dynamic of rotors are given, which show that the modified ARCF enable to improve the metrological characteristics of electromechanical balancing systems of this class.