We investigated the electrical stabilities of two types of pentacene-based organic thin-film transistors (OTFTs) with two different polymeric dielectrics: polystyrene (PS) and poly(4-vinyl phenol) (PVP), in terms of the interfacial charge depletion. Under a short-term bias stress condition, the OTFT with the PVP layer showed a substantial increase in the drain current and a positive shift of the threshold voltage, while the PS layer case exhibited no change. Furthermore, a significant increase in the off-state current was observed in the OTFT with the PVP layer which has a hydroxyl group. In the presence of the interfacial hydroxyl group in PVP, the holes are not fully depleted during repetitive operation of the OTFT with the PVP layer and a large positive gate voltage in the off-state regime is needed to effectively refresh the electrical characteristics. It is suggested that the depletion-limited holes at the interface, i.e., interfacial charge depletion, between the PVP layer and the pentacene layer play a critical role on the electrical stability during operation of the OTFT.
4 September 2007 in Molecular Crystals and Liquid Crystals
Organic thin-film-transistors (OTFTs) with solution-processed high dielectric gate insulators were fabricated. The gate insulators were made of high dielectric TiO2 nanoparticles dispersed uniformly in a polymer matrix of nylon 6 which is known to align liquid crystal molecules. It was found that the nanocomposite insulator in a pentacene-based OTFT reduces the operating voltage but it produces substantial current leakage. A buffer layer of polyvinylphenol on the top of the nanocomposite layer was found to block the leakage current and to increase significantly the carrier mobility as well as the current on-off ratio.
15 May 2003 in Japanese Journal of Applied Physics
Composite materials of poly(4-vinylphenol) (PVP) and titanium dioxide (TiO2) nanoparticles were fabricated via a spin coating process in order to enhance dielectric properties for a gate insulator application of the OTFT in this study. In order to improve dispersion stability of the TiO2 nanoparticles in the polymeric solution during the process, a surfactant was also adopted onto the solution mixture. The dispersion property was observed by measuring sedimentation time of TiO2 particles in the polymeric solution, and the effect of surfactant on the surface morphology of the dielectric layer was further analyzed by using atomic force microscopy. Dielectric properties of the PVP-TiO2 composite and performance of OTFTs with the PVP-TiO2 composite insulator are presented, along with their effects on device performance with pentacene layer as a semiconductor.
Understanding the chemical reaction pathway of the metal–salt precursor is essential for modifying the properties of solution-processed metal-oxide thin films and further improving their electrical performance. In this study, we focused on the structural growth of solution-processed amorphous indium-zinc-oxide (a-IZO) films and the electrical behavior of a-IZO thin-film transistors (TFT). To this end, solution-processed a-IZO films were prepared with respect to the Zn molar ratio, and their structural characteristics were analyzed. For the structural characteristic analysis of the a-IZO film, the cross-section, morphology, crystallinity, and atomic composition characteristics were used as the measurement results. Furthermore, the chemical reaction pathway of the nitrate precursor-based IZO solution was evaluated for the growth process of the a-IZO film structure. These interpretations of the growth process and chemical reaction pathway of the a-IZO film were assumed to be due to the thermal decomposition of the IZO solution and the structural rearrangement after annealing. Finally, based on the structural/chemical results, the electrical performance of the fabricated a-IZO TFT depending on the Zn concentration was evaluated, and the electrical behavior was discussed in relation to the structural characteristics.