Dejun Miao

Dr. Dejun Miao


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 December 2019 in Coatings
Verified
Journal Article
Open access
PDF file
YCyngmo cheng
yngmo cheng
DMDejun Miao
Dejun Miao
LKLingxiao Kong
Lingxiao Kong
JJJiachen Jiang
Jiachen Jiang
ZGZhenxing Guo
Zhenxing Guo
In order to solve the problem of dust accumulation on the fin surface of a mine air cooler, a method of preparing super-hydrophobic polyurethane (SPU) coating based on waste cooking oil (WCO) was proposed. Firstly, the polyurethane prepolymer was synthesized with WCO as a raw material, and then the polyurethane prepolymer was modified with amino-terminated polydimethylsiloxane (ATP) to obtain SPU emulsion. The chemical structure and thermal stability of SPU were characterized by infrared spectrum and thermogravimetric analysis. A series of nanocomposites were prepared by combining modified silicon carbide (APT-SiC) particles and SPU emulsions. According to the parameters of pull-off strength, contact angle, sliding angle and thermal conductivity, the filler ratio of nanocomposites was optimized. The test results show that when the content of APT-SiC particles is 20 wt %, super-hydrophobic polyurethane coating can be obtained. The coating has good pull- off strength and thermal conductivity, and the contact angle and sliding angle are 161° and 3°, respectively. In addition, the practical application of the super-hydrophobic polyurethane coating was tested by related experiments. The experimental results show that the coating has good self-cleaning, wear resistance and anti-corrosion performance, can meet the requirements of air coolers in special environments, and has great application prospects.

29 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DMDejun Miao
Dejun Miao
JJJiaqi Ji Ji
Jiaqi Ji Ji
Xiujie ChenXiujie Chen
Xiujie Chen
YLYueying Lv
Yueying Lv
LLLu Liu
Lu Liu
XSXiuhua Sui
Xiuhua Sui
A gas outburst risk level prediction method, based on the Whale Optimization Algorithm (WOA) Improved Extreme Learning Machine (ELM), is proposed to predict the coal and gas outburst hazard level more accurately. Based on this method, recommendations are given according to the gas outburst risk level with the help of the Case-Based Reasoning (CBR) method. Firstly, we analyze the accident reports of gas outburst accidents, select the gas outburst risk prediction index, and construct the gas outburst risk prediction index system by combining the gas outburst prevention and control process. The WOA-ELM model was used to predict the gas outburst risk level by selecting data from 150 accident reports from 2008 to 2021. Again, based on the coal and gas outburst risk level, CBR is used to match the cases and give corresponding suggestions for different levels of gas outburst risk conditions to help reduce the gas outburst risk. The results show that the WOA-ELM algorithm has better performance and faster convergence than the ELM algorithm, when compared in terms of accuracy and the error of gas outburst hazard prediction. The use of CBR to manage prediction results can be helpful for decision-makers.

10 May 2022 in Processes
Verified
Journal Article
Open access
PDF file
DMDejun Miao
Dejun Miao
Xiujie ChenXiujie Chen
Xiujie Chen
JJJiaqi Ji Ji
Jiaqi Ji Ji
YLYueying Lv
Yueying Lv
YZYiran Zhang Yiran Zhang Yiran Zhang
Yiran Zhang Yiran Zhang Yiran Zhang
XSXiuhua Sui
Xiuhua Sui
Air leakage in the goaf is a fundamental reason for the high-temperature heat damage of the coal mining face and the gas concentration in the upper corner exceeding the limit. Combined with the boundary layer theory, this study analyzes the airflow state of the coal mining face. We propose installing a new air curtain system to prevent air leakage in the goaf. The length of the intake air curtain is determined by solving the theoretical equation. Numerical simulation is used to study different layout schemes of air curtains, and the spatial distribution law of different air volumes inside the working face is analyzed. The simulation results are compared with the field-measured data. The results show that when the length of the air curtain on the air inlet side is 20 m, the wind flow on the working face can be approximated as a state of attached jet, and a diffuse turbulent flow area will be formed outside the air curtain. Gas concentration will increase in this area. The air leakage prevention effect is best when the air curtains with a length of 20 m for the inlet air and 10 m for the return air are arranged at both ends of the working face. This air curtain system can reduce the temperature of the working face and the gas concentration in the upper corner and has certain guiding significance for the air leakage prevention work in the goaf.

30 October 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
KYKai Yu
Kai Yu
LZLujie Zhou
Lujie Zhou
LZLujie Zhou
Lujie Zhou
JCJing Chen
Jing Chen
DMDejun Miao
Dejun Miao
XSXueqiang Shan
Xueqiang Shan
The degree of informatization of coal mine safety management is becoming higher and higher, and a large amount of information is generated in this process. How to convert the existing information into useful data for risk control has become a challenge. To solve this challenge, this paper studies the mathematical model of coal mine risk early warning in China based on data mining. Firstly, the coal mine risk data was comprehensively analyzed to provide basic data for the risk prediction model of data mining. Then, the adaptive neuro-fuzzy inference system (ANFIS) was optimized twice to build the coal mine risk prediction model. By optimizing the calculation method of the control chart, the coal mine risk early warning system was proposed. Finally, based on the coal mine risk early warning model, the software platform was developed and applied to coal mines in China to control the risks at all levels. The results show that the error of the optimized ANFIS was reduced by 66%, and the early warning error was reduced by 57%. This study aimed to provide implementation methods and tools for coal mine risk management and control, and data collected has reference significance for other enterprises.

4 June 2021 in Geofluids
Verified
Journal Article
Open access
PDF file
HYHe Yang
He Yang
DMDejun Miao
Dejun Miao
ZLZhen Liu
Zhen Liu
DZDawei Zhao
Dawei Zhao
MZMingrui Zhang
Mingrui Zhang
Hydraulic flushing drilling technology can not only improve the efficiency of high-pressure and low-permeability geological reservoir coalbed methane drainage but also effectively reduce the probability of coal and gas outburst disasters through pressure relief. The main mechanism of this technology is to expand the borehole diameter through hydraulic flushing measures, increase the strain of the coal around the borehole, and increase the development of cracked pores, to improve the permeability of the coal seam and realize the dual reduction of ground and gas pressure. However, in the actual application process, the interaction mechanism among the stress field, the structure field, and the seepage field is still not clear, and there is no clear method to accurately determine the pressure relief range based on the pressure relief mechanism in order to carry out reasonable drilling arrangements. Therefore, this article comprehensively uses laboratory experiments, numerical simulations, and field practices to fully explain the hydraulic flushing pressure relief mechanism and proposes a method to accurately determine the pressure relief range based on the radial line strain law. The results based on radial line strain showed that the effective relief radius expands to 0.86m once adopting the Φ579mm hydraulic flushing borehole compared to Φ160mm; the boreholes equivalent diameter of drilling field #11 is 2 to 3 times than that of #10 and 1.2 times the average CBM extraction amount. Therefore, as the borehole diameter increases, the permeability and radial line strain of the coal around the borehole increase significantly, but the tendency of the increase in permeability decreases with increasing vertical stress. The findings of this study can help for a better understanding of the pressure relief and permeability enhancement mechanism of hydraulic flushing, and the method of determining the pressure relief range based on radial strain can also provide a new way for other mines to practice ideas.

30 April 2025 in Processes
Verified
Journal Article
Open access
PDF file
DMDejun Miao
Dejun Miao
QFQian Feng
Qian Feng
WZWanbao Zeng
Wanbao Zeng
To address ventilation challenges in the working face of metal mine excavation, an equal-scale physical model was established with a mine section as the test site, combined with field-measured data and relevant parameters of spent air reuse equipment. Numerical simulations were carried out using Fluent 2020 R2 software to analyse the characteristics of the airflow field, temperature field, and dust distribution in the excavation roadway. The results show that when the cold air outlet temperature (T0) is 22 °C, the temperature within the cooling zone does not exceed 26.3 °C, thereby demonstrating effective cooling. The equipment parameters significantly impacted cooling and dust removal. When the distance from the cold air outlet to the heading face was set to Zm = 8 m, the air outlet temperature was T0 = 22 °C, and the ventilation circulation rate was F = 40%, the working area achieved better cooling and dust removal effects. On-site application showed that within 15 m of the working face, temperatures dropped by 3–3.5 °C, reaching a low of 25.1 °C. The relative humidity at a point 1 m away from the working face decreased from 90.6% to 70.2%, and the average dust removal efficiency was 44.9%, which significantly improved the comfort and safety of the working environment at the heading face.