An intentionally introduced interface layer in the resistive random-access memory (RRAM) devices play an important role in the improvement of resistive switching characteristics. In this paper, the resistive switching characteristics of ZrO₂-based RRAM devices by inserting a thin TiO₂ interface layer between electrodes and ZrO₂ resistive switching layer were investigated. Compared with the Cu/ZrO₂/Pt and Cu/ZrO₂/TiO₂/Pt devices, the Cu/TiO₂/ZrO₂/Pt and Cu/TiO₂/ZrO₂/TiO₂/Pt devices showed much improved programing voltages, including lower forming voltage and lower set voltage. Moreover, the reset current was also improved. These results indicate that the TiO₂ interface layer between the anode electrode and the resistive switching layer plays an important role in improving device performance.
Oxide-electrolyte based resistive random access memory (RRAM) device has been considered as a promising candidate for next-generation nonvolatile memory applications. In this letter, the resistive switching characteristics of SiO2 electrolyte based RRAM devices with different oxidizable electrode materials were investigated. Compared with the Ag/SiO2/Pt device, the Cu/SiO2/Pt device shows much improved resistive switching uniformity, which can be attributed to the continuous and stable conductive filament (CF) formed in the Cu/SiO2/Pt device. These results provide clearly evidence to deepen understanding of the resistive switching behaviors in oxide-electrolyte based RRAM devices.
Metal halides have been demonstrated to be promising candidates for X-ray detectors. However, its large leakage current caused by the severe ion migration and intrinsic defect substantially degrades device performance. In this work, an asymmetric BA2CsPb2I7-CsPbI3 planar heterojunction X-ray detector is designed to suppress the leakage current. Both experimental and theoretical calculations demonstrate that: 1) enlarged ion migration energy (0.80 eV) and conductivity mutation at the interface ensure stable baseline and suppress leakage current; 2) CsPbI3 ensures effective absorption of X-ray, while BA2CsPb2I7 induces larger bulk resistance, which is expected to achieve higher photocurrent and lower dark current. Finally, the obtained X-ray detector exhibits negligible baseline drift, faster response, and smaller leakage current compared to the CsPbI3 counterparts. Specifically, the device exhibits a detection limit of $0.092 ~\mu $ Gy $_{air}$ /s, and the CsPbI3-based device was $2.63 ~\mu $ Gy $_{air}$ /s.
Crossbar arrays are the most promising application of a resistive random access memory (RRAM) device for achieving high density memory. However, cross-talk interference in the crossbar array limits the increase in the integration density. In this paper, the combination of two anti-parallel connected diodes and a bipolar RRAM cell is proposed to suppress the sneak current in a crossbar array with anti-parallel connected diodes as the selector for the bipolar RRAM. By using the anti- parallel connected diodes as a selector, the sneak current can be effectively suppressed and the high density crossbar array of more than 1Mb can be realized as estimated by the 1/ 2Vread voltage scheme. These results indicate that anti-parallel connected diodes can be used as a bipolar selector and have great potential for high density bipolar RRAM crossbar array applications.
15 March 2011 in Journal of the Korean Physical Society