Composite nanomaterials have been prepared through thermal decomposition of palladium diacetate. The composite contains palladium nanoparticles embedded in high-pressure polyethylene. The materials were studied by a number of different physico-chemical methods, such as transmission electron microscopy, X-ray diffraction, X-ray absorption spectroscopy, electron paramagnetic resonance, and EXAFS. The average size of the nanoparticles is 7.0 ± 0.5 nm. It is shown that with the decrease of metal content in the polymer matrix the average size of nanoparticles decreased from 7 to 6 nm, and the coordination number of palladium also decreased from 7 to 5.7. The mean size of palladium particles increases with the growing concentration of palladium content in the matrix. It is shown that the electrophysical properties of the material obtained depend on the filler concentration. The chemical composition of palladium components includes metallic palladium, palladium (III) oxide, and palladium dioxide. All samples have narrow lines (3–5 Oe) with a g factor of around two in the electron paramagnetic resonance (EPR) spectra. It is shown that EPR lines have uneven boarding by saturation lines investigation. The relaxation component properties are different for spectral components. It leads to the spectrum line width depending on the magnetic field value. At first approximation, the EPR spectra can be described as a sum of two Lorentzian function graphs, corresponding to the following two paramagnetic centers: one is on the surface, and one is inside the palladium particles. Some of the experimental characteristics were measured for the first time. The data obtained indicate interesting properties of palladium-based nanocomposites, which will be useful for obtaining products based on these materials.
1 April 2011 in Inorganic Materials: Applied Research
By using the method of thermal destruction of metal-containing compounds, a nanomaterial is obtained that includes rhenium-containing nanoparticles stabilized on a surface of microgranules of polytetrafluoroethylene (PTFE). The obtained compositions were characterized by methods of transmission electron microscopy (TEM), X-ray diffraction (XRD), electron paramagnetic resonance (ESR), and differential thermal analysis and thermogravimetric analysis (DTA/TGA). The average size of Re-containing nanoparticles is in the range from 5 to 30 nm and depends on the initial metal-containing compounds. Nanoparticles have complex structure and consist of several components: Re, ReO2, and Re2O7.
Получена серия порошкообразных композиционных медьсодержащих наноматериалов с металлсодержащей компонентой 20, 30 40 масс.%. Наночастицы меди получены путем термораспада металлсодержащих соединений в матрице полиэтилена высокого давления. Исследование полученных композиционных материалов методом просвечивающей электронной микроскопии показало, что размер получаемых наночастиц составил 13 нм. Изучение образцов методом рентгенофазового анализа подтвердило наличие в них металлической меди (JCPDS 4-0836) и оксида меди (JCPDS 48-1548). Для всех образцов проведены измерения диэлектрической проницаемости на частотах 1 кГц и 1 МГц, удельного объемного сопротивления, а также коэффициентов отражения и ослабления мощности электромагнитной волны на частоте 30 ГГц. Установлено, что диэлектрическая проницаемость с ростом массового содержания наночастиц монотонно возрастает, значение удельного объемного сопротивления нанокомпозитов при изменении массового содержания меди сильно снижается. Обнаружено образование единичных (малых по сравнению с площадью контактов) проводящих каналов, образованных металлическими частицами с тонкой оксидной оболочкой. Исследования показали, что медьсодержащие частицы равномерно распределяются в объеме полимерной матрицы и имеют двухслойную структуру. Наночастицы меди, имеющие структуру типа «ядро-оболочка», можно использовать для создания «умных материалов» (smart materials, intelligent materials), обладающих не только бактериостатическими эффектами, но электропроводящими свойствами. Указанными свойствами можно управлять, варьируя концентрацию двухслойных медьсодержащих частиц в материале. При содержании частиц 30% материал будет обладать антистатическими свойствами, а при содержании 40% - электропроводящими. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 October 2025 in LAW. SAFETY. EMERGENCY SITUATIONS
In addition to the traditional identification of the mechanism of occurrence and development of a fire, the conditions that contributed to the occurrence of consequences in the form of property damage are established in the range of circumstances established in the resolution of fire cases in any proceedings (criminal, administrative, civil or arbitration). The palette of these conditions is diverse and assumes, most often, the fire-fighting condition of the object before the fire. However, recently the number of questions on the analysis of actions aimed at extinguishing a fire has been increasing. The article will consider the factual grounds for claims against participants in extinguishing a fire, sources of evidence from the plaintiffs, justifications for the insolvency of claims against participants in extinguishing, and recommendations aimed at recognizing the actions of firefighters as justified, permissible, and necessary in the specific conditions of a real fire.