Petroleum was the most-consumed energy source in the world during the past century. With the continuous global consumption of conventional oil, shale oil is known as a new growth point in oil production capacity. However, medium–low mature shale oil needs to be exploited after in situ conversion due to the higher viscosity of oil and the lower permeability of shale. This paper summarizes previous studies on the process of kerogen cracking to generate oil and gas, and the development of micropore structures and fractures in organic-rich shale formations during in situ conversion. The results show that the temperature of kerogen cracking to generate oil and gas is generally 300–450 °C during the oil shale in situ conversion process (ICP). In addition, a large number of microscale pores and fractures are formed in oil shale formation, which forms a connecting channel and improves the permeability of the oil shale formation. In addition, the principles and the latest technical scheme of ICP, namely, conduction heating, convection heating, reaction-heat heating, and radiation heating, are introduced in detail. Meanwhile, this paper discusses the influence of the heating mode, formation conditions, the distribution pattern of wells, and catalysts on the energy consumption of ICP technology in the process of oil shale in situ conversion. Lastly, a fine description of the hydrocarbon generation process of the target formation, the development of new and efficient catalysts, and the support of carbon capture and storage in depleted organic-rich shale formations after in situ conversion are important for improving the future engineering efficiency of ICP.

The Lower Paleozoic marine shale in southern China has undergone several strong tectonic transformations in an extensive region outside the Sichuan Basin. Although some shale strata underwent strong deformation, they still contain a significant amount of shale gas. The gas preservation mechanism in the strongly deformed shale has become the focus of attention. In this paper, the Lower Cambrian gas-bearing shale samples with a strong deformation taken from an exploration well in northern Chongqing, China, were investigated on their pore types and structure, with the aim to reveal the reason for the gas preservation. The pore types of the Lower Cambrian shale are dominated by microfractures and interparticle (interP) pores occurring mainly between clay minerals and between organic matter (OM) and clay minerals, while pores within OM that can be observed by FE-SEM (field emission-scanning electron microscopy) are rare. The shale has a low porosity, with an average of 1.56%, which is mainly controlled by the clay mineral content. The adsorption experiments of low pressure N₂ (LPNA) and CO₂ (LPCA) indicate that the shale is rich in micropores and small mesopores (<2–3 nm) provided mainly by OM, but mesopores with a size range of 3–50 nm are underdeveloped. The shale, as revealed by LPNA data, has dominant slit-like or plate-like pores and an obvious low-pressure hysteresis (LPH), indicating a low gas diffusion. The deformed shale samples with a removal of OM by oxidation and their isolated kerogen further indicate that the LPH is completely related to OM, without any relationship with minerals, while an undeformed shale sample, taken from another well for a comparison, has no obvious LPH for both of its OM-removed sample and kerogen. Based on a comprehensive analysis of the relative data, it is suggested that the nanopores related to OM and clay minerals in the shale were significantly altered owing to the deformation, with a result of the pores being squeezed into the slit-like shape and converted into micropores. This extraordinary pore structure of the shale formed during the deformation process should be the main preservation mechanism of shale gas.