The aqueous electrocatalytic reduction of NO3− into NH3 (NitrRR) presents a sustainable route applicable to NH3 production and potentially energy storage. However, the NitrRR involves a directly eight‐electron transfer process generally required a large overpotential (<−0.2 V versus reversible hydrogen electrode (vs. RHE)) to reach optimal efficiency. Here, inspired by biological nitrate respiration, the NitrRR was separated into two stages along a [2+6]‐electron pathway to alleviate the kinetic barrier. The system employed a Cu nanowire catalyst produces NO2− and NH3 with current efficiencies of 91.5 % and 100 %, respectively at lower overpotentials (>+0.1 vs. RHE). The high efficiency for such a reduction process was further explored in a zinc‐nitrate battery. This battery could be specified by a high output voltage of 0.70 V, an average energy density of 566.7 Wh L−1 at 10 mA cm−2 and a power density of 14.1 mW cm−2, which is well beyond all previously reported similar concepts.
For decarbonization of ammonia production in industry, alternative methods by exploiting renewable energy sources have recently been explored. Nonetheless, they still lack yield and efficiency to be industrially relevant. Here, we demonstrate an advanced approach of nitrogen fixation to synthesize ammonia at ambient conditions via laser–induced multiphoton dissociation of lithium oxide. Lithium oxide is dissociated under non–equilibrium multiphoton absorption and high temperatures under focused infrared light, and the generated zero–valent metal spontaneously fixes nitrogen and forms a lithium nitride, which upon subsequent hydrolysis generates ammonia. The highest ammonia yield rate of 30.9 micromoles per second per square centimeter is achieved at 25 °C and 1.0 bar nitrogen. This is two orders of magnitude higher than state–of–the–art ammonia synthesis at ambient conditions. The focused infrared light here is produced by a commercial simple CO2 laser, serving as a demonstration of potentially solar pumped lasers for nitrogen fixation and other high excitation chemistry. We anticipate such laser-involved technology will bring unprecedented opportunities to realize not only local ammonia production but also other new chemistries .
1 January 2017 in The American Journal of Chinese Medicine
Direct synthesis of N‐containing organic compounds from dinitrogen (N2) can make synthetic chemistry more sustainable. Previous bottlenecks in lithium‐mediated N2fixation were resolved by loading Li‐metal anodes covered with the typical Li+ion‐conducting solid electrolyte interface, which are subsequently allowed to react with N2. The developed strategy allowed us to reach high Faradaic efficiencies toward Li3N. These reactive Li3N were then contacted with acylchlorides. Surface nitride ions are more nucleophilic than amines which direct the two C−N coupling reactions toward formation of imides rather than amides, and an integrated current efficiency of 57–77 % could be realized. This study thereby not only provides a feasible electrochemical Li3N synthesis, but also delineates an economical and green synthesis of highly valuable N‐containing compounds from N2under mild conditions, just using commercial spare parts and processes from the omnipresent Li battery technology.
20 June 2023 in Angewandte Chemie International Edition
Redox flow batteries have been discussed as scalable and simple stationary energy storage devices. However, currently developed systems encounter less competitive energy density and high costs, restricting their wider application. There is a lack of appropriate redox chemistry, preferably based on active materials that are abundant in nature and show high solubility in aqueous electrolytes. A nitrogen‐centered redox cycle operating between the limiting species ammonia and nitrate via an eight‐electron redox reaction stayed practically unnoticed, albeit its ubiquity in biological processes. Ammonia or nitrate are world‐scale chemicals with high aqueous solubility, and are then comparably safe. We demonstrate here the successful implementation of such a nitrogen‐based redox cycle between ammonia and nitrate with eight‐electron transfer as a catholyte for Zn‐based flow batteries, which continuously worked for 12.9 days with 930 charging‐discharging cycles. A very competitive energy density of 577 Wh L−1 can be reached, which is well above most reported flow batteries (e.g. 8 times the standard Zn‐bromide battery), demonstrating that the nitrogen cycle with eight‐electron transfer can offer promising cathodic redox chemistry for safe, affordable, and scalable high‐energy‐density storage devices.