Grigori Evreinov

Dr. Grigori Evreinov


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2014
Verified
Conference Paper
Closed access
AFAhmed Farooq
Ahmed Farooq
GEGrigori Evreinov
Grigori Evreinov
RRRoope Raisamo
Roope Raisamo
AMAtif Abdul Majeed
Atif Abdul Majeed
Touchscreens are becoming a more attractive interaction technology in our daily lives and they are quickly replacing most of the conventional user interface controls. The ability to continuously modify and reconfigure screen contacts is a valuable feature in any device, especially in mobile devices like smartphones and tablets, where every inch matters. Perhaps the most inviting aspect of touchscreens is their ability to detect gestures and recognize human activities. Unlike externally static interfaces with a dedicated input device, such as a keypad with discrete well-defined keys; most touch sensitive displays are embodied as a flat, stiff and ridged screen surface. As a result, touch sensitive displays are breaking down and do not follow either ergonomic rules and standards nor physiological and psychological models/concepts of the afferent flow information processing. This, in turn, means that these systems diminish perceptual and intuitive haptic feedback which hinders and sometime limits user interaction.This paper defines a Haptic User Interface Enhancement System (UIES) that transforms the conventionally flat and stiff touchscreen surfaces intoa haptically adaptive interaction hub which is not only able to provide generic vibrotactile stimulation for conformational haptic feedback but is able to guide the user though onscreen User Interface controls via kinetic feedback cues which includes components of forces and torques applied dynamically in the place of contact to the fingertips.

19 July 2016 in IEEE Sensors Journal
Verified
Journal Article
Closed access
AFAhmed Farooq
Ahmed Farooq
GEGrigori Evreinov
Grigori Evreinov
RRRoope Raisamo
Roope Raisamo
This paper investigates the possibility of providing one-directional micro-displacement-based tactile feedback for touchscreen displays on mobile devices, utilizing the existing haptic actuators and transducers. Most existing systems use a generic vibration signal, transmitted throughout the entire device, irrespective of the point of interaction. This low-resolution generic haptic feedback mechanism also does not account for variations caused during signal propagation through various density components and ignores specific skin-receptor constraints. Therefore, tactile information delivered to the point of contact is usually distorted and inconsistent with reference to the original signal and its meaning, creating phase shifts and signal integration as well as dead zones, throughout the device. This research tries to redefine vibrotactile feedback by utilizing the micro-displacements of a screen overlay on top of the touchscreen as the core haptic feedback mechanism. To achieve this, we have developed a custom setup to test and deliver one-directional micro-displacements on a mobile device (Nokia Lumia 710) with the help of a transparent 100-μm-thick PET film overlay. Utilizing four generic vibrotactile actuators, to generate skin micro-displacements, at various frequencies, we have measured each actuator's ability to create one-directional displacement of the screen overlay and concluded that it is indeed possible to evolve from an inefficient, entire-device-based vibration haptic system, to a simple screen overlay micro-displacement mechanism for delivering onscreen tactile feedback utilizing the existing actuators. Furthermore, we also specify additional parameters that need to be considered in designing any touchscreen-based haptic system.

Verified
Journal Article
Open access
PDF file
PCPatrick Coe
Patrick Coe
GEGrigori Evreinov
Grigori Evreinov
RRRoope Raisamo
Roope Raisamo
To improve the perception of haptic feedback, materials and sense-modifier effects should be examined. Teflon, Nylon mesh, and Silicone overlays were tested in combination with lateral vibrations to study their impact on the tactile sense. A feelable point moving along a line was implemented through the use of a dynamically moving interference maximum generated via the offset actuation of four haptic exciters affixed to corners of a Gorilla Glass surface. This feedback was presented to eight participants in a series of randomized experiments. Both the Nylon mesh and Teflon covering revealed a statistically significant (p < 0.05) impact of improvement to the user performance in the task of dynamic haptic virtual straight lines localization. While Silicone covering, having three times greater friction than Gorilla Glass, has less or no impact on both decision time, the number of task repetitions, and error rate (p > 0.05). The lateral vibration modifier (60 Hz) can also successfully be used with an increase in performance by about twofold, at least that was demonstrated for both the Nylon mesh and Teflon covering.

Verified
Journal Article
Open access
PDF file
PCPatrick Coe
Patrick Coe
GEGrigori Evreinov
Grigori Evreinov
HSHasse Sinivaara
Hasse Sinivaara
AHArto Hippula
Arto Hippula
RRRoope Raisamo
Roope Raisamo
High-fidelity localized feedback has the potential of providing new and unique levels of interaction with a given device. Achieving this in a cost-effective reproducible manner has been a challenge in modern technology. Past experiments have shown that by using the principles of constructive wave interference introduced by time offsets it is possible to achieve a position of increased vibration displacement at any given location. As new interface form factors increasingly incorporate curved surfaces, we now show that these same techniques can successfully be applied and mechanically coupled with a universal actuation plate.

Verified
Journal Article
Open access
PDF file
PCPatrick Coe
Patrick Coe
GEGrigori Evreinov
Grigori Evreinov
MZMounia Ziat
Mounia Ziat
RRRoope Raisamo
Roope Raisamo
This paper investigates the versatility of force feedback (FF) technology in enhancing user interfaces across a spectrum of applications. We delve into the human finger pad’s sensitivity to FF stimuli, which is critical to the development of intuitive and responsive controls in sectors such as medicine, where precision is paramount, and entertainment, where immersive experiences are sought. The study presents a case study in the automotive domain, where FF technology was implemented to simulate mechanical button presses, reducing the JND FF levels that were between 0.04 N and 0.054 N to the JND levels of 0.254 and 0.298 when using a linear force feedback scale and those that were 0.028 N and 0.033 N to the JND levels of 0.074 and 0.164 when using a logarithmic force scale. The results demonstrate the technology’s efficacy and potential for widespread adoption in various industries, underscoring its significance in the evolution of haptic feedback systems.

Verified
Journal Article
Open access
PDF file
PCPatrick Coe
Patrick Coe
GEGrigori Evreinov
Grigori Evreinov
MZMounia Ziat
Mounia Ziat
RRRoope Raisamo
Roope Raisamo
In this paper, we report a method of implementing a universal volumetric haptic actuation platform which can be adapted to fit a wide variety of visual displays with flat surfaces. This platform aims to enable the simulation of the 3D features of input interfaces. This goal is achieved using four readily available stepper motors in a diagonal cross configuration with which we can quickly change the position of a surface in a manner that can render these volumetric features. In our research, we use a Microsoft Surface Go tablet placed on the haptic enhancement actuation platform to replicate the exploratory features of virtual keyboard keycaps displayed on the touchscreen. We ask seven participants to explore the surface of a virtual keypad comprised of 12 keycaps. As a second task, random key positions are announced one at a time, which the participant is expected to locate. These experiments are used to understand how and with what fidelity the volumetric feedback could improve performance (detection time, track length, and error rate) of detecting the specific keycaps location with haptic feedback and in the absence of visual feedback. Participants complete the tasks with great success (p < 0.05). In addition, their ability to feel convex keycaps is confirmed within the subjective comments.