This paper presents the research results of the effect of using calcium oxide and potassium permanganate on the combustion of pellets from wheat bran and beet pulp. The measurements were performed in the technical laboratory of the Centre of Energy Utilization of Non-Traditional Energy Sources in Ostrava. The research examined the effect of the use of chemical substances on the amount of air pollutants from biomass thermal conversion in a low-power boiler and the process temperature. First, we performed technical and elementary analyses of agricultural waste. The raw material was then comminuted, mixed with a selected additive, pelletized, and finally burned in a low-power boiler. The additive was added in three proportions: 1:20, 1:10, and 1:6.67 (i.e., 15%) relative to the fuel weight. The combustion process efficiency was measured using a flue gas analyzer and three thermocouples attached to the data recorder. From the measurement results, we were able to determine the percentage reduction of pollutant emissions into the atmosphere (CO, NO_x, and SO₂) due to the use of additives. Because emission standards are becoming increasingly stringent and fuel and energy prices are rising, the results presented in this article may be useful to agri-food processing plants that want to manage these materials thermally.

The search for an effective, cost-efficient, and selective sorbent for CO₂ capture technologies has been a focus of research in recent years. Many technologies allow efficient separation of CO₂ from industrial gases; however, most of them (particularly amine absorption) are very energy-intensive processes not only from the point of view of operation but also solvent production. The aim of this study was to determine CO₂ and CH₄ sorption capacity of pyrolyzed spruce wood under a wide range of pressures for application as an effective adsorbent for gas separation technology such as Pressure Swing Adsorption (PSA) or Temperature Swing Adsorption (TSA). The idea behind this study was to reduce the carbon footprint related to the transport and manufacturing of sorbent for the separation unit by replacing it with a material that is the direct product of pyrolysis. The results show that pyrolyzed spruce wood has a considerable sorption capacity and selectivity towards CO₂ and CH₄. Excess sorption capacity reached 1.4 mmol·g⁻¹ for methane and 2.4 mmol·g⁻¹ for carbon dioxide. The calculated absolute sorption capacity was 1.75 mmol·g⁻¹ at 12.6 MPa for methane and 2.7 mmol·g⁻¹ at 4.7 MPa for carbon dioxide. The isotherms follow I type isotherm which is typical for microporous adsorbents.

The study aimed to assess the quality of spraying of ornamental conifer using a multi-rotor drone. We examined how the speed of drone movement and the propellers’ spin speed can affect the deposition quality of the sprayed liquid in the crown of blue spruce (Picea pungens Engelm.). Due to the avoidance in the future of droplet drift by air movements, an air injector atomiser for liquid spraying was used, and a low altitude of 0.6 m of the drone flying above the tree was used in the study. The drone moved at two speeds: 0.57 m·s^–1 and 0.94 m·s^–1. The propellers’ spin speeds were adjusted based on the drone’s weight with the spray liquid tank filled and empty. The propellers’ zero-spin rate was also included to compare the drone to a field sprayer. The tests were conducted in a laboratory setting. Volume and uniformity of liquid volume settled on the levels of samplers positioned on a tripod within the tree canopy were assessed. The samplers were placed in two zones of the tree: near the tree trunk and at a distance of 0.21 m from the trunk. Airstream speed generated by drone propellers was also evaluated inside the tree. The findings indicated that the rotations of propellers and air speed significantly influenced the quality of liquid deposition on samplers located away from the trunk. The results also showed that using a drone instead of a field sprayer could benefit the quality of the spray application. The weight of the multi-rotor drone, determined by the spray liquid tank’s filling level, can significantly impact the quality of spray deposition in the tree. Based on the investigations, it can be recommended that low-altitude spraying drones be adopted for studies and future strategies in precision agriculture using autonomous inspection-spraying drones.

Using agricultural waste biomass pyrolysis to produce energy sources and biochar may support local economies in rural areas and enhance sustainability in the agricultural sector, reducing dependence on traditional energy sources and fertilisers. To obtain liquid and gaseous forms of biomass fuel, wheat straw pellets were pyrolysed in a screw reactor at temperatures of 300, 400, 500, 600, and 700 °C. An analysis was conducted to assess the influence of process temperature on the physicochemical composition of the raw material and the resulting biochar, pyrolysis liquid, and synthesis gas. The presence of potentially harmful substances in the biochar, whose addition to soil can improve soil properties, was assessed by quantitatively determining polycyclic aromatic hydrocarbons (PAHs). Similar tests were carried out for pyrolysis fluid. The assessments were based on the standards for the most dangerous PAHs: fluorene, anthracene, fluoranthene, benzo[b]fluorine, benz[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-cd]pyrene. The results indicated that the total content of polycyclic aromatic hydrocarbons in the biochar ranged from 346.81 µg·kg⁻¹ at 300 °C to 1660.87 µg·kg⁻¹ (700 °C). In the pyrolytic fluid, the PAH content ranged from 58,240.7 µg·kg⁻¹ (300 °C) to 101,889.0 µg·kg⁻¹ (600 °C). It was found that the increase in PAH content in both the biochar and the liquid progressed with increasing pyrolysis temperature. After finding a correlation between the increase in the PAH content in biochar and the increase in the content of high-energy gases in the synthesis gas, it was concluded that it is difficult to reconcile the production of PAH-free biochar in the pyrolysis of biomass with obtaining high-energy gas and pyrolysis oil.

Gas from the gasification of pellets made from renewable sources of energy or from lower-quality fuels often contains a number of pollutants. This may cause technical difficulties during the gas use in internal combustion gas engines used for energy and heat cogeneration. Therefore, an adequate system of gas cleaning must be selected. In line with such requirements, this paper focuses on the characterization and comparison of gases produced from different types of biomass during gasification. The biomass tested was wood, straw, and hay pellets. The paper gives a detailed description and evaluation of the measurements from a fix-bed gasifier for the properties of the produced gases, raw fuels, tar composition, and its particle content before and after the cleaning process. The results of elemental composition, net calorific value, moisture, and ash content show that the cleaned gases are suitable for internal combustion engine-based cogeneration systems, but unsuitable for gas turbines, where a different cleaning technology would be needed.