Squeeze film dampers (SFDs) are components used in many industrial applications, ranging from turbochargers to jet engines. SFDs are applied when the vibration levels or some instability threatens the safe operation of the machine. However, modeling these components is difficult and somewhat counterintuitive due to the multiple complex phenomena involved. After a thorough investigation of the state of the art, the most relevant phenomena for the characterization of the SFDs are highlighted. Among them, oil film cavitation, air ingestion, and inertia are investigated and modeled. The paper then introduces a numerical model based on the Reynolds equation, discretized with the finite difference method. Different boundary conditions for oil feeding and discharging are implemented and investigated. The model is validated by means of experimental results available in the literature, whereas different designs and configurations of the feeding and sealing system are considered. Eventually, an example of the application of a SFD to a compressor rotor for the reduction of vibration and correction of the instability is proposed. The paper provides an insight regarding the critical aspects of modeling SFDs, underscoring the limits of the numerical model, and suggesting where to further develop and improve the modeling.
Torsional vibration is a critical phenomenon in rotor dynamics. It consists of an oscillating movement of the shaft and causes failures in multiple oscillating fields of application. This type of vibration is more difficult to measure than lateral vibration. Torsional vibrometers are generally invasive and require a complicated setup, as well as being inconvenient for field measurements. One of the most reliable, non-invasive, and transportable measuring techniques involves the laser torsional vibrometer. For this research, two laser heads with different measurement capabilities were utilized. An experimental test rig was used to perform a relative calibration of the two laser vibrometers. The frequency of the acting force and the rotation speed of the shaft vary in the same range, which is commonly found in rotating machines. Finally, experimental measurements of torsional vibrations using laser vibrometers were compared with numerical results from a 1D finite element model of the same test rig. The main outcome of this paper is the definition of a reliable measuring procedure to exploit two laser vibrometers for detecting torsional mode-shapes and natural frequencies on real machines. The relative calibration of two different measuring heads is described in detail, and the procedure was fundamental to properly correlate measuring signals in two machine sections. A good correspondence between the numerical and experimental results was found.
Tilting-pad journal bearings are widely used in industry to support rotating shafts due to their high dynamic performance. The operating limits of these bearings are mainly represented by the maximum permissible temperature of the lined materials of the pads and by the minimum thickness of the oil-film under which mixed lubrication can occur. The current trend in bearing development sees the adoption of innovative materials in the production of the pads, that provide higher load capacity, higher temperature capability and greater fatigue resistance. In this paper, the static characteristics of bearings lined with different materials, will be investigated. The temperature distribution in the bearing will be evaluated by means of a full 3D thermal model whereas the deformation of the pads will be evaluated by means of a finite element model. At the end, the permissible operating range in terms of load and speed will be defined for each material by considering the limits on the maximum temperature, permissible mechanical stress and minimum oil-film thickness.
The ORCHID turbine is a laboratory single-stage 10 kW high-speed (∼100 krpm) radial-inflow turbine for high-temperature/high-efficiency organic Rankine cycle (ORC) systems, designed at the Aerospace Propulsion and Power laboratory of Delft University of Technology. It will be installed within a test section of the organic Rankine cycle hybrid integrated device (ORCHID) facility, the setup for fundamental and applied studies on ORC technology currently in operation in the same lab. Experimental data from future measurement campaigns will be employed to validate design and performance prediction tools and to develop best practices for operating these unconventional machines, whose most notable features are the ultra-high expansion ratio (>40), highly supersonic flow in the stator (Ma > 2), and the large flow deflection within the impeller channels (>90). This article presents the mechanical design and the rotordynamic assessment of the ORCHID turbine rotor, and best practices for the numerical evaluation of the rotordynamic characteristics and stability of high-speed ORC turbine rotors. The emphasis is on three main aspects: i) the modeling and quantification of the damping characteristics of a squeeze film damper (SFD) cartridge for the selected turbocharger ball bearings supporting the turbine shaft; ii) the characterization of the stiffness and damping coefficients of a custom designed pocket gas seal, performed using 3D RANS simulations; iii) the analysis of linear elastic rotordynamic simulations using a finite beam element model of the turbine rotor. Results of the rotordynamic simulations show that the rotor would operate in the sub-critical regime with respect to the first bending mode. The influence of model parameters such as the rotor eccentricity and the orbit radius was included in the analysis by conducting a parametric study of the SFD fluid forces. The Campbell diagrams show that shaft bending frequencies are significantly affected by changes in the SFD dynamic response depending on the rotational speed. The influence of the stiffness of rolling bearing elements and of the destabilizing forces due to the impeller and gas seal cross-coupled stiffness was also evaluated. The rigidity of the rolling elements slightly affects the shaft bending mode, while large values of the destabilizing forces cause a rotordynamic instability of the first rigid mode.
26 December 2023 in Journal of Engineering for Gas Turbines and Power
The necessity of increasing the efficiency and reducing the carbon foot-print of machines is pushing centrifugal compressor bearings design to higher and higher peripheral speed and lower oil consumptions especially in the new energy transition fields, resulting in an increase in the bearing temperatures. Therefore, the bearing thermal management starts to play a major role in extending the machine operability and reducing the maintenance frequency. A full three-dimensional (3D) parametric conjugate heat transfer computational fluid dynamic (CFD) model for tilting pad journal bearings (TPJBs) is introduced in this paper to address the temperature aspects of oil-film bearings. The parametric geometry of the model and the automatic mesh update, allow the equilibrium position search to be obtained without adopting any dynamic mesh algorithms. The tilting pad and rotating shaft equilibrium position are automatically calculated with a Newton–Raphson algorithm. The static performance of the TPJB is investigated for different journal diameters, bearing clearance, and operating conditions. The numerical results obtained are compared with experimental data from compressor mechanical running tests to demonstrate the reliability of the model presented. The 3D distributions of the oil pressure, velocity, and temperature given by the CFD model, can be locally optimized to face the new energy transition challenges.