In recent decades, the use of alpha; pure beta; or beta/gamma emitters in oncology, endocrinology, and interventional cardiology rheumatology, has proved to be an important alternative to the most common therapeutic regimens. Among radionuclides used for therapy in nuclear medicine, two rhenium radioisotopes are of particular relevance: rhenium-186 and rhenium-188. The first is routinely produced in nuclear reactors by direct neutron activation of rhenium-186 via ¹⁸⁵Re(n,γ)¹⁸⁶Re nuclear reaction. Rhenium-188 is produced by the decay of the parent tungsten-188. Separation of rhenium-188 is mainly performed using a chromatographic ¹⁸⁸W/¹⁸⁸Re generator in which tungsten-188 is adsorbed on the alumina column, similar to the ⁹⁹Mo/^99mTc generator system, and the radionuclide eluted in saline solution. The application of rhenium-186 and rhenium-188 depends on their specific activity. Rhenium-186 is produced in low specific activity and is mainly used for labeling particles or diphosphonates for bone pain palliation. Whereas, rhenium-188 of high specific activity can be used for labeling peptides or bioactive molecules. One of the advantages of rhenium is its chemical similarity with technetium. So, diagnostic technetium analogs labeled with radiorhenium can be developed for therapeutic applications. Clinical trials promoting the use of ^186/188Re-radiopharmaceuticals is, in particular, are discussed.

The favorable nuclear properties in combination with the rich coordination chemistry make technetium-99m the radioisotope of choice for the development of myocardial perfusion tracers. In the early 1980s, [^99mTc]Tc-Sestamibi, [^99mTc]Tc-Tetrofosmin, and [^99mTc]Tc-Teboroxime were approved as commercial radiopharmaceuticals for myocardial perfusion imaging in nuclear cardiology. Despite its peculiar properties, the clinical use of [^99mTc]Tc-Teboroxime was quickly abandoned due to its rapid myocardial washout. Despite their widespread clinical applications, both [^99mTc]Tc-Sestamibi and [^99mTc]Tc-Tetrofosmin do not meet the requirements of an ideal perfusion imaging agent due to their relatively low first-pass extraction fraction and high liver absorption. An ideal radiotracer for myocardial perfusion imaging should have a high myocardial uptake; a high and stable target-to-background ratio with low uptake in the lungs, liver, stomach during the image acquisition period; a high first-pass myocardial extraction fraction and very rapid blood clearance; and a linear relationship between radiotracer myocardial uptake and coronary blood flow. Although it is difficult to reconcile all these properties in a single tracer, scientific research in the field has always channeled its efforts in the development of molecules that are able to meet the characteristics of ideality as much as possible. This short review summarizes the developments in ^99mTc myocardial perfusion tracers, which are able to fulfill hitherto unmet medical needs and serve a large population of patients with heart disease, and underlines their strengths and weaknesses, the lost and found opportunities thanks to the developments of the new ultrafast SPECT technologies.

This paper reports the synthesis, structure, photophysical, and optoelectronic properties of five eight-coordinate Europium(III) ternary complexes, namely, [Eu(hth)₃(L)₂], bearing 4,4,5,5,6,6,6-heptafluoro-1-(2-thienyl)-1,3-hexanedione (hth) as a sensitizer and L = H₂O (1), dpso (diphenyl sulphoxide, 2), dpsoCH₃ (4,4′-dimethyl diphenyl sulfoxide, 3), dpsoCl (bis(4-chlorophenyl)sulphoxide, 4), and tppo (triphenylphosphine oxide, 5) as co-ligands. The NMR and the crystal structure analysis confirmed the eight-coordinate structures of the complexes in solution and in a solid state. Upon UV-excitation on the absorption band of the β-diketonate ligand hth, all complexes showed the characteristic bright red luminescence of the Europium ion. The tppo derivative (5) displayed the highest quantum yield (up to 66%). As a result, an organic light-emitting device, OLED, was fabricated with a multi-layered structure—ITO/MoO₃/mCP/SF3PO:[complex 5] (10%)/TPBi:[complex 5] (10%)/TmPyPB/LiF/Al—using complex 5 as the emitting component.

(1) Background: Metal dithiocarbamate compounds have long been the subject of research due to their ease of formation, excellent properties and potential applications. However, manganese complexes with dithiocarbamates, to our knowledge, have never been used for medical imaging applications. With the aim of developing a new class of mononuclear manganese(II)-based agents for molecular imaging applications, we performed a specific investigation into the synthesis of mononuclear bis-substituted Mn(II) complexes with dithiocarbamate ligands. (2) Methods: Synthesis in either open or inert atmosphere at different Mn(II) to diethyldithiocarbamate molar ratios were performed and the products characterized by IR, EA, ESI-MS and XRD analysis. (3) Results: We found that only under oxygen-free atmospheric conditions the Mn(II) complex MnL₂, where L = diethyldithiocarbamate ligand, is obtained, which was further observed to react with dioxygen in the solid state to form the intermediate superoxo Mn(III) complex [MnL₂(η²-O₂)]. The existence of the superoxo complex was revealed by mass spectroscopy, and this species was interpreted as an intermediate step in the reaction that led the bis-substituted Mn(II) complex, MnL₂, to transform into the tris-substituted Mn(III) complex, MnL₃. A similar result was found with the ligand L’ (= bis(N-ethoxyethyl)dithiocarbamate). (4) Conclusions: We found that in open atmosphere and in aqueous solution, only manganese(III) diethyldithiocarbamate complexes can be prepared. We report here a new example of a small-molecule Mn(II) complex that efficiently activates dioxygen in the solid state through the formation of an intermediate superoxide adduct.

Magnetic resonance imaging (MRI) is a non-invasive powerful modern clinical technique that is extensively used for the high-resolution imaging of soft tissues. To obtain high-definition pictures of tissues or of the whole organism this technique is enhanced by the use of contrast agents. Gadolinium-based contrast agents have an excellent safety profile. However, over the last two decades, some specific concerns have surfaced. Mn(II) has different favorable physicochemical characteristics and a good toxicity profile, which makes it a good alternative to the Gd(III)-based MRI contrast agents currently used in clinics. Mn(II)-disubstituted symmetrical complexes containing dithiocarbamates ligands were prepared under a nitrogen atmosphere. The magnetic measurements on Mn complexes were carried out with MRI phantom measurements at 1.5 T with a clinical magnetic resonance. Relaxivity values, contrast, and stability were evaluated by appropriate sequences. Studies conducted to evaluate the properties of paramagnetic imaging in water using a clinical magnetic resonance showed that the contrast, produced by the complex [Mn(II)(L’)₂] × 2H₂O (L’ = 1.4-dioxa-8-azaspiro[4.5]decane-8-carbodithioate), is comparable to that produced by gadolinium complexes currently used in medicine as a paramagnetic contrast agent.

The trend to achieve even more compact-sized systems is leading to the development of micro-scale reactors (lab-on-chip) in the field of radiochemical separation and radiopharmaceutical production. Technetium-99m extraction from both high and low specific activity molybdenum could be simply performed by MEK-driven solvent extraction if it were not for unpractical automation. The aim of this work is to develop a solvent extraction and separation process of technetium from molybdenum in a micro-scale in-flow chemistry regime with the aid of a capillary loop and a membrane-based separator, respectively. The developed system is able to extract and separate quantitatively and selectively (91.0 ± 1.8% decay corrected) the [^99mTc]TcO₄Na in about 20 min, by using a ZAIPUT separator device. In conclusion, we demonstrated for the first time in our knowledge the high efficiency of a MEK-based solvent extraction process of ^99mTc from a molybdenum-based liquid phased in an in-flow micro-scale regime.